Recommended Posts

I just bought a Lenovo IdeaCentre H415 (it has an A6-3650 with Radeon 6530D GPU, VGA and HDMI output, but no DVI). My monitor supports VGA, HDMI and DVI. When it's plugged in via VGA, it works as you would expect. When it's plugged in via HDMI - nothing. I've looked around for some option in Display/Personalisation, but nothing is evident that would allow me to do this (nor in the Catalyst Control Centre).

it should work right away when you plug in the cord, so there are 3 possibilities

1. bad hdmi cord

2. the port on the laptop is bad

3. the port on the monitor is bad

(it's also possible, though unlikely, that the drivers weren't installed correctly. have you updated the catalyst drivers?)

  On 04/01/2013 at 16:42, Brando212 said:

it should work right away when you plug in the cord, so there are 3 possibilities

1. bad hdmi cord

2. the port on the laptop is bad

3. the port on the monitor is bad

(it's also possible, though unlikely, that the drivers weren't installed correctly. have you updated the catalyst drivers?)

well, there's more possibilities than that. i thought the sme as StrikedOut. the monitor may need to change its source.

  On 04/01/2013 at 16:45, Jdawg683 said:

well, there's more possibilities than that. i thought the sme as StrikedOut. the monitor may need to change its source.

i figured if that were the case it would still show as a detected output in ccc and screen rez window

since he didn't mention it appearing i figured it probably didn't

I had the same problem and when I read this thread, it dawned on me that I had not thought of there being an "Input Select" option in the monitor settings. Sure enough, that was all my problem was. Now, having my HP laptop connected to my ASUS monitor via HDMI works fine. I had just thought the monitor would work if you had a good connection to a source, but then again, I should have thought about how the monitor would handle it if you had more than one source connected simultaneously, like VGA and HDMI at the same time. In that case, it makes sense that the monitor would have to ask you what source you wanted to use or there would be a "Input Select" option to tell it what source/connection to use.

Another thing to note, when I changed the monitor input selection to HDMI, I had no audio/sound then. I figured the audio was being then sent thru the HDMI cable, but because my monitor doesn't have speakers (I didn't want a monitor with speakers... would rather have decent separate speakers) I wasn't getting any sound. Sure enough, that was it. Once I had opened my audio settings and set "Speakers and Headphones" as the default place/ports to send audio to, my audio/sound was back as usual.

I wasn't able to figure out which key launches the BIOS, but after a couple of reboots it ended up going off HDMI. I did have to do the input select on the monitor as well, which required a complete power cycle to get working. I didn't have the sound problem, possibly because I already have headphones plugged in?

Image quality is much better now.

OK. This isn't working out how I'd like. Whenever the system goes to sleep, it doesn't output anything when waking up. I have to plug VGA back in to have a chance at getting HDMI.

I checked the BIOS, and it only has the option to use Auto or default to a PCI-e GPU.

hmm, it sounds like the hdmi on your graphics card might just be faulty, there's no reason your hdmi should be acting like that, it should just work when it's plugged in unless you explicitly turn off that input yourself (which can only be done while it's plugged in and detected)

if you're able to, I'd think about taking the graphics card back and exchanging it as I doubt it's a driver problem at this point

Have you tried hooking up to another monitor/TV using HDMI, just to narrow things down?

It should just work right off the bat. You normally don't have to change anything, other than switch to the specific HDMI port on the monitor/TV.

  On 06/01/2013 at 01:45, migo said:

It's integrated, part of the A6-3650.

well that complicates things a little if it is indeed faulty

just to be sure, you do have the official AMD 12.10 drivers installed and not the drivers supplied by Lenovo correct?

if not, try the official AMD driver or vice-verse

Having one of the AMD integrated GPU/CPU's myself, I literally plugged in HDMI to the motherboard (which came with an HDMI port) and away I went. If your HDMI is not functioning properly it's due to one of a few things...

1.) Something is incorrectly setup in your BIOS (as the HDMI port is provided by your motherboard. You should make sure your BIOS settings indicate the system should use the integrated graphics from the GPU/CPU)

2.) AMD drivers for your integrated GPU are not functioning properly/corrupt/etc. (Try uninstalling/reinstalling the drivers)

3.) Or it's defective.

Do you have a television you can plug into using HDMI? See how it function while connected to that. If it works fine, it's most likely an issue with your monitor. If it continues to misbehave, it is definitely your system.

  On 06/01/2013 at 08:44, migo said:

I do have a TV I could plug in, but that would be a fair amount of effort lugging everything over. I'll try that if everyone's out of ideas.

Sure...however I'd want to know if it's the machine or the monitor pretty quick. Especially if I have to RMA something. I wouldn't wait too long ;) You really don't need to take "everything". The tower, the HDMI cable and the power cable for the tower and mouse/keyboard? You don't need anything else. All you really need to do is turn it on. If the TV pops on and displays, fantastic. If you want to wait for it to auto turn off the TV or go to sleep and then wake it to see if it jumps back, even better.

OK, so I observed the scanning process while the system was waking up. The monitor attempted to get a signal via HDMI, but there simply wasn't one.

It would appear it's a Windows 8 issue, as someone else is having the same issue, except only with Windows 8, and not Windows 7. I think I'll just put up with it. I'd have to spend a couple hundred dollars more to get a remotely comparable system with DVI (or buy a video card, which will probably run into a CPU bottleneck, and I'd need to spend more for a system with even a Core-i3).

  On 06/01/2013 at 23:07, migo said:

I'd have to spend a couple hundred dollars more to get a remotely comparable system with DVI (or buy a video card, which will probably run into a CPU bottleneck, and I'd need to spend more for a system with even a Core-i3).

if you want to connect to monitor dvi, a simple hdmi - dvi adapter/cable will work.

  On 06/01/2013 at 23:07, migo said:

OK, so I observed the scanning process while the system was waking up. The monitor attempted to get a signal via HDMI, but there simply wasn't one.

It would appear it's a Windows 8 issue, as someone else is having the same issue, except only with Windows 8, and not Windows 7. I think I'll just put up with it. I'd have to spend a couple hundred dollars more to get a remotely comparable system with DVI (or buy a video card, which will probably run into a CPU bottleneck, and I'd need to spend more for a system with even a Core-i3).

My HTPC (the one with the integrated graphics CPU in it) is running on Windows 8. I don't have this issue, at least not on my TV.

This topic is now closed to further replies.
  • Posts

    • I don't think there is any problem with the two-digit number. Even if someone didn't understand the meaning, 26 > 18, so they will still understand at a glance that it is a newer version. The only downside I see is someone assuming 18 is a MUCH older than 26, but IMO, that confusion really isn't a big issue. The truth is that the majority of software companies use the 2-digit number; Microsoft is the outlier, and even they used 2-digit numbers in the past.
    • So, now it can give inaccurate answers and peddle lies in an even more human sounding voice? :)
    • Aiarty Image Enhancer for PC & Mac (worth $85) free offer ends today June 8 by Steven Parker Claim your complimentary eBook worth $85 for free, before the offer ends today June 8. Get Aiarty Image Enhancer to restore and upscale images to 32K with more details. Make your images and photos larger, sharper and clearer with AI. Tired of the tiny, blurry or low-resolution images downloaded from web or grainy pictures taken by old smartphones? Aiarty Image Enhancer comes to help you out. Leveraging tailored AI models and deep learning algorithms, it can transform any images, photos and AI arts into high-quality visuals with exceptional clarity and realistic details. No matter you’re enhancing web graphics, restoring cherished family memories, or preparing visuals for creative projects, Aiarty can produce studio-quality results in just a few clicks. Get it now to transform your images to stunning masterpieces at zero cost! Key Features: Upscale: enlarge images and photos to 4K/8K/32K for printing, archiving, sharing, displaying, or more. More details: generate more realistic details for hair, fur, feature, skin textures and so on, ensuring crystal-clear pixels. Restore face with faithful details, perfect for portraits, selfies, old photos, group shot. 4-in-1 enhancement: deblur, denoise, dejpeg and upscale image in one click. Batch process. Enhance 3000+ images at once, streamlining image editing workflow. Fast & Simple. Upscale 100 images in 2 minutes with just one click. No skills needed. Trained on 6.78 million images. Optimized for NVIDIA, AMD, and Intel GPUs & CPUs. The exclusive offer ends on June 8th. Don't miss out – grab your free licensed copy today. How to get it Please ensure you read the terms and conditions to claim this offer. Complete and verifiable information is required in order to receive this free offer. If you have previously made use of these free offers, you will not need to re-register. While supplies last! Download Aiarty Image Enhancer for PC/Mac (worth $85) for free Offered by Digiarty WinXDVD, view other free resources The below offers are also available for free in exchange for your (work) email: Winxvideo AI V3.0 Lifetime License for PC ($69.95 Value) FREE – Expires 6/8 Aiarty Image Enhancer for PC/Mac ($85 Value) FREE – Expires 6/8 Solutions Architect's Handbook, Third Edition ($42.99 Value) FREE – Expires 6/10 AI and Innovation ($21 Value) FREE – Expires 6/11 Unruly: Fighting Back when Politics, AI, and Law Upend [...] ($18 Value) FREE - Expires 6/17 SQL Essentials For Dummies ($10 Value) FREE – Expires 6/17 Continuous Testing, Quality, Security, and Feedback ($27.99 Value) FREE – Expires 6/18 VideoProc Converter AI v7.5 for FREE (worth $78.90) – Expires 6/18 Macxvideo AI ($39.95 Value) Free for a Limited Time – Expires 6/22 The Ultimate Linux Newbie Guide – Featured Free content Python Notes for Professionals – Featured Free content Learn Linux in 5 Days – Featured Free content Quick Reference Guide for Cybersecurity – Featured Free content We post these because we earn commission on each lead so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin The above deal not doing it for you, but still want to help? Check out the links below. Check out our partner software in the Neowin Store Buy a T-shirt at Neowin's Threadsquad Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: An account at Neowin Deals is required to participate in any deals powered by our affiliate, StackCommerce. For a full description of StackCommerce's privacy guidelines, go here. Neowin benefits from shared revenue of each sale made through the branded deals site.
    • You will find sketch and clone apps on both the Play Store and the App Store contrary to what Google and Apple will tell you. This fact negates their argument for why there shouldn't be other app stores and so on, it's BS at the end.
    • I ran the powershell script and it did not "recreate the inetpub directory if it has been deleted" I rebooted several times and also tried re running the script. I had to click y three times when I ran it initially as well, now running it just returns to a new poweshell line with no errors but still no directory recreated. meh
  • Recent Achievements

    • First Post
      viraltui earned a badge
      First Post
    • Reacting Well
      viraltui earned a badge
      Reacting Well
    • Week One Done
      LunaFerret earned a badge
      Week One Done
    • Week One Done
      Ricky Chan earned a badge
      Week One Done
    • Week One Done
      maimutza earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      +FloatingFatMan
      264
    3. 3
      snowy owl
      238
    4. 4
      ATLien_0
      231
    5. 5
      Edouard
      177
  • Tell a friend

    Love Neowin? Tell a friend!