Rebuild compatibility


Recommended Posts

Hey all,

I'm looking to rebuild my system and I've noticed newegg has some good deals right now on things i've been looking at.

RAM:

http://www.newegg.co...N82E16820233186

Video Card:

http://www.newegg.com/Product/Product.aspx?Item=N82E16814150656

CPU:

http://www.newegg.co...N82E16819103960

I'm also looking at this motherboard:

http://www.newegg.co...N82E16813130657

My case is a micro-atx case, so I'm some what limited unless I get a new case, but I'd like to avoid that.

I was hoping to get a mobo that supports atleast that speed of ram (preferably without overclocking) and has usb 3.0 but I am having a hard time finding one.

Does anyone see any problems with this components? Anyone have any suggestions on a motherboard?

Thanks,

HC

Link to comment
https://www.neowin.net/forum/topic/1131296-rebuild-compatibility/
Share on other sites

That MSI board is fine. I've used MSI before and they run nice. Looks like you have a decent set of components. They should all be compatible, however I would look up the MSI board on MSI's website and ensure compatibility with the memory and CPU you're planning to get. What is your main intended use for this system? If it's gaming, then an AMD FX will do just as well as an i5 or i7 + or - a few fps here or there.

I'm not sure why those links aren't working for some of you, so i'll just list out the pieces below.

CPU: AMD FX-8150

RAM: Corsair vengeance 2x4gb 1600

VGA: XFX radeon 7850 1gb

PSU: CORSAIR Builder Series CX600 600W

Case: Antec Mini P180 Black Steel

I found this mobo as well.

http://www.asrock.co...=Specifications

I didn't realize MSI was so crummy.

My budget isn't real large, so I'm trying to keep it around $400-$450, but I'm still open to suggestions.

No SATA 3 on that MSI board and not a lot of good AMD Micro ATX layouts to go for.

This would be the best layout but no SATA 3.

http://www.newegg.co...N82E16813128565

I agree that not having SATA 3 could be a bummer. It could be bad if you wanted to upgrade to an SSD at some point in the future. I've been out of the hardware game for only a few months, but man has the micro-ATX market diminished!

@HouseCookie, that mobo you mentioned doesn't have USB3 as you requested :)

May I ask why you want the ddr1600? Would you notice any real world speed improvements? Or is it because it's in a sale?

I found a motherboard with SATA 6Gb/s and USB 3 with DDR1333 support - SATA6 is good, has USB3 but no DDR1600 support

Or your one you listed in the OP SATA 3Gb/s and USB2 with DDR1600 support - SATA3 is bad (if wanting ssd in future), has USB2 but a PCIe card can fix that, and has DDR1600 support

Or... you could get an ATX case and a new ATX motherboard :p

Yeah I was going to add that almost all RAM, at least to my knowledge, is natively 1333MHz. The 1600MHz sets are just tested and rated to run at 1600MHz, and therefore using it at that speed is overclocking. Someone correct me if I am wrong.

You are right, it doesn't. I like your suggestion about an additional card. I'm having a hard time finding a mobo that has usb 3.0 and supports ddr3 1600 :/

AMD CPU may or may not run at that ram speed they list here as Supports up to DDR3-18662 but the 2 then reads.

"1866 supported with 1 DPC (DIMM per Channel) in single memory slot motherboard designs"

http://www.amd.com/u...l-features.aspx

The modo I listed listed above does have USB 3 but not SATA 3 and this one has both if you can get it but some of the SATA ports may be blocked if the GPU card is too long.

http://www.gigabyte....spx?pid=3817#ov

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Linux 7.1 arrives with an NTFS overhaul and major hardware performance boosts by Paul Hill The founder of the Linux kernel has just announced the availability of Linux 7.1. This is a stable version of the kernel that will now be tested by various Linux distributions before it is shipped to users through update managers. Some users, like those on Debian, for example, might not get it for a long time, if at all, while Fedora users can expect it in the near future. With Linux 7.1 out on time, the merge window for Linux 7.2 is now open, giving contributors the opportunity to send in major new features that have been waiting for the last two months. Torvalds warned that he is currently travelling and will be in another timezone, so timing for the merge window may be irregular due to timezone differences and limited internet access. Torvalds said that he has already fetched early pull requests to allow him to do some offline work, but the travel could still cause disruption. Right now, he is not planning to extend the release, but did consider it. He said he might later regret not extending, though. In terms of this last week of development for Linux 7.1, Torvalds said there were no major or alarming changes. This week consisted mostly of smaller driver updates to GPU, networking, and sound, networking fixes, trace tooling fixes, and misc minor fixes. The shortlog this week lists fixes for driver bugs, memory leaks, I/O and USB fixes, networking and RDMA fixes, DRM/graphics fixes, and tooling and verification improvements. Specific fixes include USB series heap-overflow and buffer overflow fixes, and multiple use-after-free, memory-leak, and refcount corrections across subsystems such as i2c, zram, gpio, and net. There are fixes for graphics drivers, including amdgpu, i915, and virtio, as well as hypervisor and virtualization tweaks affecting mshv, vmbus, and hyperv. According to Phoronix, anyone running Linux 7.1 should look out for the new NTFS driver, Intel FRED for improved performance on Panther Lake and future CPUs, faster graphics with Intel Arc Battlemage, and improvements for older AMD Radeon GPUs. If you are running Linux on your computer and everything is fine, then you don’t need to worry about updating to Linux 7.1 as a priority; just wait for it to be pushed to you. If you have tried Linux on hardware but it didn’t work properly, trying again with a distro that uses Linux 7.1 could cause Linux to work on your machine, thanks to the new hardware support.
    • you can also do this with this tool: PowerSettingsExplorer made by mbk1969 at 3dguru forum.. I found it by accident researching on modern standby and annoying quirks of it in 2022
    • AB Download Manager 1.9.1 by Razvan Serea AB Download Manager is an open-source, feature-rich download manager designed to accelerate downloads, organize files efficiently, and provide seamless control over downloads. With support for multiple connections, resume capability, and an intuitive interface, it enhances the downloading experience for users seeking speed and reliability. The software integrates with various browsers, enabling quick link grabbing and batch downloading. It supports HTTP, HTTPS, and FTP protocols, ensuring broad compatibility with different file sources. Users can schedule downloads, set speed limits, and categorize files automatically for better organization. AB Download Manager is lightweight yet powerful, making it a great alternative to proprietary download managers. Its open-source nature allows developers to contribute, customize, and improve the software as needed. Whether you're downloading large files, managing multiple downloads at once, or seeking an ad-free experience, this tool offers a practical and efficient solution. Key features of AB Download Manager: Multi-Connection Support – Accelerates downloads by splitting files into multiple segments. Resume Capability – Allows paused or interrupted downloads to be resumed without starting over. Batch Downloading – Supports downloading multiple files at once for improved efficiency. Browser Integration – Captures download links directly from browsers for seamless operation. HTTP, HTTPS, and FTP Support – Ensures compatibility with a wide range of file sources. Download Scheduling – Enables users to automate downloads at specific times. Speed Limiting – Lets users control bandwidth usage for optimized performance. File Categorization – Automatically organizes downloaded files into designated folders. User-Friendly Interface – Simple and intuitive design for easy navigation. Cross-Platform Compatibility – Works on multiple operating systems. Ad-Free Experience – No intrusive ads or tracking for a clean user experience. AB Download Manager 1.9.1 changelog: Added An option to customize notification sounds (#1259) Fixed Ongoing notification was laggy on Samsung One UI devices (#1269) Improved Updated Translations Minor UI/UX improvements Download: AB Download Manager 1.9.1 | Portable | ~80.0 MB (Open Source) Download: ARM64 | Portable ARM64 | Android Links: AB Download Manager Website | Github Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • watching him because of the Mr Klinton cat
    • yup dude, ADS on this website are terrible
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      140
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!