• 0

Fedora 18 screwed pc (HELP!)


Question

So I never use any linix distros because I really don't like unix but a friend of mine asked me to download a copy of Fedora 18 and put the live cd version on a USB key.

I copied it using a program Unet something as I found on youtube. After rebooting to try it out my motherboard won't post anymore

P8P67 PRO

I've rebooted, shut down, reset the jumpers

Now I'm a bit ****ed how this happened?

Link to comment
https://www.neowin.net/forum/topic/1131354-fedora-18-screwed-pc-help/
Share on other sites

16 answers to this question

Recommended Posts

  • 0

So now a nice bright RED light is on the motherboard so something died kinda great it was working amazing up till I tried this POS.

Well seems like its the boot device LED that went off.

Known issue on the p8p67 PRO motherboards from what I read.

  • 0

So now a nice bright RED light is on the motherboard so something died kinda great it was working amazing up till I tried this POS.

Well seems like its the boot device LED that went off.

Known issue on the p8p67 PRO motherboards from what I read.

Unplug the computer from the power outlet and reset the BIOS either by using a jumper (look in you mobo's manual) or removing the battery for a few secons. Also try to power on the computer without the USB drive you prepared with Fedora.

If it posts and you can access the BIOS, see if ASUS has an update for it and update it.

  • 0

yeah defo not the fault of the download or Unetbootin, unless you told it to overwrite and install the image on the hard drive instead of the usb, i suppose that could stop your boot

  • 0

Seems someone else had the issue too over here: http://forums.overcl....php?p=14923555

What graphics card do you have?

(Once working again) I recommend using this instead (for making bootable Linux USB disks): http://www.pendrivel...-easy-as-1-2-3/ I have been for over a year, and it's brilliant. Also, try KNOPPIX (http://distrowatch.c...ibution=knoppix - preferably the DVD version) instead of Fedora. Using KNOPPIX is one of the best ways to start learning about/play around with Linux, because all the software is already there installed and configured for you.

  • 0

Seems someone else had the issue too over here: http://forums.overcl....php?p=14923555

What graphics card do you have?

(Once working again) I recommend using this instead (for making bootable Linux USB disks): http://www.pendrivel...-easy-as-1-2-3/ I have been for over a year, and it's brilliant. Also, try KNOPPIX (http://distrowatch.c...ibution=knoppix - preferably the DVD version) instead of Fedora. Using KNOPPIX is one of the best ways to start learning about/play around with Linux, because all the software is already there installed and configured for you.

Least he can get things going, me its dead in the water.

The device light is on I did pretty much everything to resolve it but its dead.

Gonna have to RMA and never touch linux again lol

Really ****ed off through didn't need this (so much work to do)

Anyways, new topic, recommend me a new motherboard that works with my specs other then Asus.

I always go with Asus boards and need a change. Price isn't an issue.

  • 0
  • 0

More of an underlying hardware issue - the software is a red herring.

I had to look up "red herring" on Urban Dictionary to understand what you meant: http://www.urbandictionary.com/define.php?term=red%20herring :laugh:

  • 0

Searching for "P8P67 pro recall" in Google comes up with info about a motherboard recall. Not good.

Here's more reading you can do about people having similar issues:

http://hardforum.com...d.php?t=1581590

http://hardforum.com...d.php?t=1633885

http://hardforum.com...d.php?t=1581490

http://hardforum.com...d.php?t=1580896

http://hardforum.com...d.php?t=1576509

My board was one of the ones that they fixed with the B3 stepping

so not exactly the same issue as those but thanks.

The board is going to have to be RMA'ed just really ticked off that it went like that since it was fine until I tried to put linux on a thumb drive.

Still looking for suggestions on another motherboard that will be good for what I already have.

So far i'm looking at MSI Z77A-GD55 and the GD65 series.

  • 0

Least he can get things going, me its dead in the water.

The device light is on I did pretty much everything to resolve it but its dead.

Gonna have to RMA and never touch linux again lol

Really ****ed off through didn't need this (so much work to do)

Anyways, new topic, recommend me a new motherboard that works with my specs other then Asus.

I always go with Asus boards and need a change. Price isn't an issue.

once again, it definitely wasn't linux or the unetbootin that caused the issue. just some really coincidental timing

but either way, it sucks and I hope your new mobo works out :)

  • 0

Lol @ blaming linux.

Anyways, my PC was doing this a couple nights ago. Wouldn't post and sat with a red light on. I unplugged it and cleaned the crap out of it (lots of dust). I re-applied some thermal paste as I figured it might of been heat problems. I put it all back together, and it took a bit for it to post the first time, however now it is running butter smooth, and am seeing quite the preformance increase just from the actions I took to clean it and cool it.

  • 0

I got a new motherboard and it did the samething turns out the SSD I have died. Fun fun, took the motherboard with it, it seems.

Lol @ blaming linux.

Anyways, my PC was doing this a couple nights ago. Wouldn't post and sat with a red light on. I unplugged it and cleaned the crap out of it (lots of dust). I re-applied some thermal paste as I figured it might of been heat problems. I put it all back together, and it took a bit for it to post the first time, however now it is running butter smooth, and am seeing quite the preformance increase just from the actions I took to clean it and cool it.

Yeah in my case everything is new, I always clean it every 2-3 weeks for dust so its spotless.

It was just an ill timed death of my SSD but I'm still scared to try my USB boot device, not in the mood to kill another pc.

Maybe I'll try it on my work laptop lol

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The auto industry really needs to update it's terminology so a software update isn't called a recall.
    • Anybody that thinks flying cars were possible are idiots. Everyone would basically need a pilot licence, can you imagine how insane and dangerous that would be, people can barely handle driving on land safely right now.
    • Microsoft Edge 149.0.4022.80 by Razvan Serea Microsoft Edge is a super fast and secure web browser from Microsoft. It works on almost any device, including PCs, iPhones and Androids. It keeps you safe online, protects your privacy, and lets you browse the web quickly. You can even use it on all your devices and keep your browsing history and favorites synced up. Built on the same technology as Chrome, Microsoft Edge has additional built-in features like Startup boost and Sleeping tabs, which boost your browsing experience with world class performance and speed that are optimized to work best with Windows. Microsoft Edge security and privacy features such as Microsoft Defender SmartScreen, Password Monitor, InPrivate search, and Kids Mode help keep you and your loved ones protected and secure online. Microsoft Edge has features to keep both you and your family protected. Enable content filters and access activity reports with your Microsoft Family Safety account and experience a kid-friendly web with Kids Mode. The new Microsoft Edge is now compatible with your favorite extensions, so it’s easy to personalize your browsing experience. Microsoft Edge 149.0.4022.80 changelog: Fixes Fixed an issue that prevented QR code generation from working. Feature updates Intune MAM Protected Downloads. The protected downloads feature for Intune MAM will now save downloaded files to the Documents > Microsoft Edge > Downloads folder in OneDrive. Extensions monitoring in the Edge management service. The Microsoft Edge management service now allows admins to gain visibility into extensions installed across their managed users. From the extensions monitoring page, admins can see which extensions have been installed as well as manage user requests for blocked extensions. For more information, see Microsoft Edge Extensions Monitoring. Validate Edge builds early with enterprise preview. Enterprise preview provides a simpler way for admins to flight pre-release Edge builds to their users. To reduce friction and bolster usage, users will receive pre-release builds directly inside of their Stable Edge application. Admins can allow users to easily opt-out of the preview experience, using built-in rollback to switch between their pre-release and stable channels with ease. Microsoft 365 admin center users can configure the feature, view their flighting population, and receive personalized recommendations all in one place. For more information, see Get started with Enterprise Preview in Microsoft Edge. Download: Microsoft Edge (64-bit) | 193.0 MB (Freeware) Download: Microsoft Edge (32-bit) | 170.0 MB Download: Microsoft Edge (ARM64) | 188.0 MB View: Microsoft Edge Website | Release History Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The machines are starting to fight back any way they can.
    • No news articles about the Arch Linux repo being majorly infected with malware?!?
  • Recent Achievements

    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
    • First Post
      BizSAR earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      599
    2. 2
      +Edouard
      190
    3. 3
      PsYcHoKiLLa
      79
    4. 4
      Michael Scrip
      77
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!