Recommended Posts

Over the last few months, I have been trying to find out a good VPN for my needs. Speed was the biggest factor for me. This will not be a in-depth review

Hide My Ass!

I used them for three years and a pretty good company. They where stable for the most part and they had great guides on different setups. Example would be if you wanted to use pFSense.

Speed: 5/10

I never got about 7Meg down from any server

Stable: 5/10

Price: 7/10

Not the cheapest, but with their great support and many server choices, not bad

The connection would drop many times if left on for hours

Software: 10/10

Their software has been great features and very user friendly.

Private Internet Access

Speed: 1/10

Never got more than 3 meg from any server

Stable: ?? Didn't use it long enough

Price: 8/10 Great price, crappy service

Software: 3/10 Crashed a lot, had neat features such as port fowarding that did not work

IPVanish

Speed: 10/10

25meg down

Stable: 10/10 hasn't been down in the last three days

Software: 7/10, could have more options. but it is simple and works well..

Price: 7/10, Kinda high but if you get the 1 year, it is much cheaper.

Link to comment
https://www.neowin.net/forum/topic/1131432-vpn-reviews-tested-three/
Share on other sites

I read a lot of reviews on VyprVPN.. They seem to log more information than others. Also, there are a lot of post about people using it and getting letters from their ISP about P2P. If you don't use P2P, it shouldn't be that big of deal.. I don't use torrents, but I don't like how much they log.

Correction, they did not get letters from their ISP, VyprVPN was sending them letters about MPAA, RIAA complaints.

I use Boxpn, sometimes disconnects but re-connects if you use their software, fastest speed i have had is the maximum i download which is about 3mb on my 30mb line. Price is cheap and they have answered all but one of my questions but it wasn't a biggie "how do i make your software auto connect to x server".

I do not use it a ton, but I also have VyperVPN, and get the same exact speeds I get when I am just straight connected to my ISP. Literally maxes out my connection. So they definitely seem to have that part covered.

Since i'm living in China, i rely heavily on a VPN. I've been using StrongVPN for the past year and have had mixed results. Unfortunately China have upgraded the great firewall and have blocked many VPN connections. Most of the companies have fixed this but it means using methods that can potentially affect your down/upload speeds.

I second vyprvpn with pfsense, jsut wish I could get the firewall Aliases to work with the rules so I could get my xbox (and a few other rules) to stream from the US without routing all the traffic over vyprvpn

This looks good https://www.cryptip.com

Not really your paying $10 for access to three servers UK, US and BG wherever BG is and its the same price as other services that have a bigger and better selection also they drop the connection if its not used for ten minutes. Can not find information about there logging :/

APPROPRIATE USE OF THE SERVICES.

CryptIP.com provides the Services exclusively and makes no effort to edit, control, monitor or restrict the content of data other than as necessary to provide such Services.

Client Content. Client agrees that it will not distribute, electronically transmit or display any materials supplied by Client - or through Client by a third party - to any CryptIP.com server in connection with Client's use of the Services which:

  • Violate any state, USA federal laws or regulations
  • Infringe on any intellectual property rights (e.g., copyright, trademark, patent or other proprietary rights) of CryptIP.com or any third party
  • Are defamatory, slanderous or trade libelous
  • Are threatening or harassing
  • Content that contains: beastiality, lolita, warez, child porn are discriminatory based on gender, race, age or promotes hate, violates any CryptIP.com policy posted on the CryptIP.com site including, but not limited to, our Acceptable Use Policy (includes Adult Content Policy), UCE (SPAM) Policy, and CGI Abuse Policy.
  • Contain viruses or other computer programming defects which result in damage to CryptIP.com or any third party.

No "SPAM". Client shall not use the Services for chain letters, junk mail, spamming, or any use of distribution lists to any person who has not given specific permission to be included in such a process.

Id like to use VyperVPN but it doesn't accept my card and no paypal option either!

(only need a VPN for Skype really because people keep using Skype IP grabber and booting my net ;s)

If its just going to be for skype have you thought about using a free service? There are a few out there, i believe hotspot shield give you 10gb but that waa a year or more ago so might of changed, then i hear Hamachi is popular too if it was just for skype like you said id be looking at a free option rather than a paid service if its going to be used for other things then sure pay! lol

If its just going to be for skype have you thought about using a free service? There are a few out there, i believe hotspot shield give you 10gb but that waa a year or more ago so might of changed, then i hear Hamachi is popular too if it was just for skype like you said id be looking at a free option rather than a paid service if its going to be used for other things then sure pay! lol

It hard to find service which works on Mac recommend any ones for OS X?

It hard to find service which works on Mac recommend any ones for OS X?

I use Boxpn (paid service) like i said in this thread it works on mac and windows as for recommending a free one i can not because i only used a free one for a little while which was Hotspot Shield which does have a mac version. No harm in trying it is there?

I ended up checking about the logging on Vypr as i was thinking of trying them out but after reading this i thought "naaaah!"

VyprVPN is the VPN service connected to and offered by the Giganews Usenet service, although it can be used completely standalone. In common with many other providers we contacted, VyprVPN acknowledged receipt of our questions but then failed to respond. We?ve included them here since they have such a high-profile.

The company policy says that logging data ?is maintained for use with billing, troubleshooting, service offering evaluation, [Terms of Service] issues, [Acceptable Use Policy] issues, and for handling crimes performed over the service. We maintain this level of information on a per-session basis for at least 90 days.?

On Usenet forum NZBMatrix several users have reported having their VyprVPN service terminated after the company processed ?a backlog? of DMCA notices which pushed them over the ?two-strikes-and-out? acceptable use policy.

So, does VyprVPN log? You bet.

As for bole they dont log.

Source: http://torrentfreak....riously-111007/

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      590
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!