Recommended Posts

You you are intending to install OSX you would be better off with GTX6xx series due to native support in OSX.. other than that nice config as well

Not likely to be a Hackintosh. Just a big huge frag machine.

Which, however, will take me all day to put together. See, I'm really bad at cable management, my main job being to build and take apart mainly cheap "typewriters" instead of such killer rigs. Thus far Fractal Design Define R4 has been my best accomplishment. Took some three hours (with some calls in between). This one, though, is a whole level above.

Congrats! It's uberawesome!

Looks good Boz!

I have the first Cosmos and think its a good case even though mine has been broke since the day i got it (one the sides wount latch on when closed meaning if its knocked it opens up coolmaster not too helpful) but id defiantly buy another of there cases if i liked it and the second Cosmos looks good too! Loving the buttons :D Also love how they have more wire holes too the first one only had a few and the plastic around the edges of them is kinda low grade!

Got notified my order is shipping today. Since they are not working over the weekend I should probably get it by Tuesday and then the fun begins.

Excited every time I get new parts. That feeling of putting stuff together and maxing it out never gets old :)

Congrats. I hope it serves you well.

Whoa, you have me mad jealous right now. I decided to wait for Haswell before upgrading but man is it hard to wait. Nothing better than an awesome case and a pile of shiny new parts on the table.

I'm not a big fan of SLI and especially of using last-generation video cards though... what's the rationale behind the two 580s?

Nice build! I just spoiled myself with a cheap ultraportable replacement for my previous ultraportable laptop. My desktop is now 3+ years old, but going to let it ride out for a few more years before I touch upgrades on that.

Whoa, you have me mad jealous right now. I decided to wait for Haswell before upgrading but man is it hard to wait. Nothing better than an awesome case and a pile of shiny new parts on the table.

I'm not a big fan of SLI and especially of using last-generation video cards though... what's the rationale behind the two 580s?

https://www.neowin.net/forum/topic/1131668-its-that-time-of-year-new-build/page__view__findpost__p__595463184

Stock install humming like a beast!

Some screenies, while I write the setup and optimization of the system to get everything rocking just right

8418004777_96a2655cc7_o.png

8418004775_49ce30aa0f_o.png

8419098534_e56ea2c0f4_o.png

8418004753_ecfe2a0bf8_o.png

Geekbench 32bit (Pure stock 3.2ghz / Turbo turned off)

8419070904_18c81a67c3_o.png

OpenCL and OpenGL tests

8417976635_189501ca83_o.png

8417976613_a6aca0020e_o.png

8417976571_676ffdab45_o.png

8419070902_37a101e432_o.png

8417976615_9640552d9b_o.png

8419070924_a72c421ca6_o.png

8419070916_6b0e2efec2_o.png

Unigine Engine OpenGL tests

8417998147_6a3169c67c_o.png

8417998141_56b52ff7c7_o.png

INSTALLING OSX procedure

Preparing installation:

Downloading Unibeast and Multibeast from TonyMacOSX86 http://www.tonymacx86.com/downloads.php?do=cat&id=3

Download KextUtility so I can update OSX kexts I change (if I need to cause I don't like KextBeast ) http://cvad-mac.narod2.ru/Kext_Utility

Unibeast Preparation of the OSX install USB drive - You'll need a mac for this

1. Download Mac OSX Mountain Lion from the app store on a Mac (best thing is to download the latest version)

2. When the install screen of Mountain Lion pops up, keep in the background (don't close it as it will delete the Mountain lion install file from Applications). Wouldn't be a bad idea to copy this file somewhere on another drive to just have it handy later.

3. Insert USB stick (at least 8gb) and Run Disk Utility on that Mac.

4. Select that USB on the left and go under Partition. Partition to 1 partition and select Mac OS Extended (Journaled)

B33y

5. Also under Options select Master Boot Record

L07

6. Apply

7. When it's done, start Unibeast

8. Pick the target as your USB stick you just formatted and continue through the NEXT windows. You will wait here for about 10-15 mins until the thing finishes (it's ok if it looks like it's stuck, it's working)

9. BAM! You made the USB bootable OSX Mountain Lion stick

In the next post we are going through OSX Mountain Lion install process

So now when you have a USB drive prepared with the latest version of Mountain Lion you should be able to install OSX from it. A couple of things we need to do before that though.

1. Make sure that if you have dual cards like I do (preferably GTX5xx series or GTX6xx series) and multiple monitors you unplug all the monitors from the cards and just plug in one monitor to your primary video card (in PCI-E slot 1)

2. Go into BIOS and make sure you have your settings on Optimized Default (BIOS for Sabertooth X79 I'm using is the latest 3305 I think). Optimized defaults will make sure you didn't turn on some funky settings before installing OSX. If you have overclock it will be resetted to default which is what we want

3. Now, save the settings and your BIOS should restart the computer. But not before you insert the USB stick with the Mountain Lion you prepared.

4. When the computer restarts you will be able to hit F8 at the very beginning and pick a boot menu. You will pick the USB drive from there to boot from.

5. You should now get the boot screen with funky looking big icons where you can pick your USB Mountain Lion install.

8413950766_30a808be14_b.jpg

6. Highlight that circle (disc) but instead of hitting enter you can start typing right away the following (you will see a command line pop up). Type in the following:

-v GraphicsEnabler=Yes npci=0x3000 PCIRootUID=0 cpus=1

Just so you know quickly what these mean:

>> -v means to run boot up installer in verbose mode so you can see what's going on

>> GraphicsEnabler is a hook that is only needed for non-native cards. Since Nvidia 6xx series are now supported on OSX out of the box you need to turn this hook off with No .. but in my case I have GTX 580s I still need it.

>> npci and PCIRootUID parameters are in charge of PCI enumeration so the installer can properly recognize PCI addresses.

>> cpus=1 means that you want to limit the install only to use one core in case there's a conflict with multicore (like in the case of hexacore i7s)

8413946764_d2a491bd90_b.jpg

7. So when you typed that in, hit ENTER to start the install process.

8412848575_df86ac5438_b.jpg

8. If everything goes ok, you should see an install OSX window start screen

8412848341_6932a2455d_b.jpg

9. Before you continue to install make sure you go to Disk Utility up in the menu and prepare your drives by formatting them and making the drive you are installing on MacOS Extended Journaled and GUID Partition Table. Once you are done close DIsk Utility.

8413946168_5cd1f3882d_b.jpg

10. Continue to install and pick your drive you are installing on from the list and start the install.

8413946062_897524773a_b.jpg

11. Wait till it finishes

8413942958_a5b44a52e7_b.jpg

12. When it's done it will restart and make sure you again hit BOOT MENU so you can load USB drive selector again.

13. Select the newly installed OSX drive icon and type into the command line -v GraphicsEnabler=Yes npci=0x3000 PCIRootUID=0 cpus=1 (use GraphicsEnabler=No only if you have 6xx Nvidia card if not change it to YES) to boot in.

Voila. We are in.

8414157096_6f29d9d11b_b.jpg

In the next post we will be finishing up installation by enabling all the necessary hardware, enabling multicore and a few other things and we will be ready to rock.

OPTIMIZING YOUR OSX INSTALL AND NEXT STEPS.

So you have a fresh install running now after the boot as described in the last step of previous guide. You should not be resetting stuff until it's done.

In my case I like to install CUDA / NVidia drivers first before I run Multibeast.

You can find these downloads here:

NVIDIA Driver

Version: 304.00.05f02

Release Date: 2012.10.02

Operating System: Mac OSX Mountain Lion 10.8.2

http://www.nvidia.com/object/macosx-304.00.05f02-driver.html

CUDA Driver:

http://www.nvidia.com/object/cuda-mac-driver.html

So before you run Multibeast and further optimization you want to install these drivers first. Install Nvidia driver first and it will ask you to restart.

You can restart but don't forget to boot up again from the USB stick with the parameters given before and you should be back on your desktop with these drivers installed. At that point you can install CUDA driver (won't ask you to restart).

So now, when you got this part covered. You want to run Multibeast. Multibeast will basically install Chameleon boot loader and adjust a few kexts to get things operational.

On this setup I have you should pick the following:

8418176271_8cb26117cb_b.jpg

You will notice that I picked eSATA support as well as TRIM enabler. That's because I have both eSATA ports and SSD drives. I also chose support for USB 3.0 and OpenCL patch for the retail driver you installed previously.

I did not pick Audio drivers because support in Multibeast for audio for this motherboard (including Rampage) is flakey so I decided to go with another driver.

So when you have these options picked. Hit Continue and wait until it finished.

OK..

so now, since Mountain Lion has a bit of an issue with support for multicore processors with the newest i7s (Sandy Bridge and Ivy Bridge) on Hackintoshes you will need to add the following KEXT file to your system.

So download this file VoodooTSCSync.kext to your desktop: https://docs.google.com/file/d/0B38K6L6i3r5cTUJ0Q2xMOHRoMUk/edit

Since I already noted that you should have also downloaded a utility called KextUtility, you want to start this app now. Wait until it fixes permissions and does it's thing..

When it says it did that , you should drag the VoodooTSCSync.kext from your desktop into the app and you should see it being installed.

This file now enables you to have a 6-core CPU properly recognized and fully utilized.

Now, let's add the audio and make it working. The driver I'm using right now is VoodooHDA 2.82 version for Mountain Lion.

You can find it here VoodooHDA.kext - https://docs.google.com/file/d/0B38K6L6i3r5cMkNuMV81eHVkZHM/edit

You will also need the preference pane file VoodooHDA.prefPane from here: https://docs.google.com/file/d/0B38K6L6i3r5cTUJ0Q2xMOHRoMUk/edit

Now, you will drag VoodooHDA.kext file you downloaded again to desktop to KextUtility and have that installed and you will also copy VoodooHDA.prefPane file to System/Library/PreferencePanes

8419299382_5883843d68_o.png

Okay..that should do it.. we got Audio covered (my audio chip is ALC892 on Sabertooth but since this VoodooHDA is universal it should work on other ALC8xx chips as well) like Rampage ALC898 chip.

Now we have 2 small things to do. One is to add additional description for the CPU in one plist file and install a nice theme for the boot loader.

So let's do this minor adjustment in your OSXDrive / Extra folder. See image:

8419308524_ed2017b24f_b.jpg

So you open this smbios.plist file and you will add these 2 things after the last set of keys in there.

<key>SMcputype</key>
<string>1281</string>

1281 is designation for 3930k 6-core

Save it and you are done there.

You should also use my org.chameleon.Boot.plist file to look like this:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>darkwake=0 npci=0x3000</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>1600x1200x32@60</string>
</dict>
</plist>

GraphicsEnabler key should be No if you have 6xx series card. Graphics Mode is so your boot loader screen loads in a higher resolution. Maximum for me is 1600x1200x32 you shouldn't go higher as it is known to cause issues if you use unrecognized mode.

That's that..

and now, let's make that boot loader screen nicer.

Go here and download the theme:

https://docs.google.com/file/d/0B38K6L6i3r5cWEFJYXVmUm03WVk/edit

All you have to do is go here:

8418231741_0308abe5b1_o.png

and you do what I did.. rename the Default folder to Default_old, create a new folder Default and put all the files from that zip you downloaded in it. That's it.

Close and run KextUtility one more time to repair all permissions and stuff and you can remove the USB stick and boot from the drive directly.

When you restart you should get a boot loader that looks like this:

8419341666_ba59b2b61d_b.jpg

Thank you very much for sharing, I found it very interesting to see how you deployed the "Hackintosh". I have heard of people doing this but never had the need to head in this direction myself. Surprisingly I found out there was "more" involved that I originally thought - nice.

I would love to know - how you divide your time on the two O/S's, for me I literally have a Mac sitting next to my Windows 7 machine.

Overlocked it to 4.4Ghz.. Got it 4.6Ghz but couldn't pass Prime95 stress test for a few hours and didn't want to increase voltages more because it wouldn't be good for a long term 24/7 operation for the CPU.

So 4.4Ghz is the rock solid speed.. passed AIDA64 stabillity stress testing for all components for 9 hours and couple of hours of Prime95 for all 3, Small FFT, Large FFT (termal test) and Blend test (stressing CPU and RAM).

Quite a bit of a bump in speed. Awesome! Quite a bit faster than their fastest Mac Pro 12 core :)

8441651273_eb138a5852_b.jpg

8441651197_c426d6cdf9_b.jpg

8441651237_d70d95437d_o.png

8441651269_a316a03435_b.jpg

8441651247_7580e9a2d6_b.jpg

2013-02-04_104259.png

This topic is now closed to further replies.
  • Posts

    • Why Delta Chat is the best decentralized messenger you have probably never tried by Paul Hill There is no shortage of messaging apps out there; we have WhatsApp, Messenger, and Telegram, just to name a few. While Meta has taken steps to incorporate encryption into Messenger and WhatsApp, they still leave a lot to be desired. If you are in the market for a messaging app that promotes security, privacy, and optional anonymity, you'll want to read what I have to say about Delta Chat. For those not familiar with Delta Chat, rather than relying on centralized servers as you do with Facebook Messenger, it relies on email. Essentially, it is a chat interface that feels like a messaging app, but secretly in the background, it is firing off emails. In the past, you used to have to sign in with your email account. When you sent messages to people, it would just be sending encrypted messages to their inbox, which their Delta Chat client would decrypt. When I first learned about Delta Chat, it required users to sign in with an email account, but I was pleasantly surprised upon trying it in 2026 that this is no longer a requirement, or the preferred method was to use the app. Recently, I’ve tried UAD-ng on my old Nokia 3.4 to disable most of the Google apps because the bootloader is locked, and this is the next best option. While finding replacement apps in F-Droid, I came across Delta Chat again, and it has undergone quite a big change since I last used it, with its new chatmail relays, which no longer require you to sign in to your own email account, providing anonymity, and they offer greater security. Android and Desktop Delta Chat apps. Not only does it run on my de-googled phone, but it also works on desktop computers and iOS, making it truly ubiquitous. For me, Delta Chat is a wonderful alternative messenger because it gives you more control. It supports switching between different profiles, which you can set up super quickly; you don’t register a username, you don’t register a password. The only thing you do have is a random string email address on a chatmail relay (which you don’t have to memorize). To maintain access to your profile, you just need to add a second device to your account via QR code or make a backup of your account, which you can restore later. Fail to do these, your account is gone - as it should be if you don’t want to leave accounts that could get hacked later on. My decision to block Google stuff on my Nokia was done for practical reasons; the device sucked when it launched, and it sucks even more now. The nice thing about F-Droid and the apps within is that they’re usually lightweight, free of bloat, and work well on that device. What was inconvenient for me was that it was hard to send messages from that device, say if I wanted to copy a code over to my main phone or send family members a link from that device. That’s when I decided to look at the available chat apps and saw Delta Chat. Another nice thing about Delta Chat is its notifications. Some messaging apps rely on Google’s ecosystem for notification transport on Android; however, with Delta Chat, it can use Google’s solutions if you have Play Services or MicroG installed. Otherwise, it is able to keep a background connection to the chatmail relay server so that you can get notified when you receive a message. As free software, the code of Delta Chat is open for all who want to take it and build upon it. In the future, if the developers of Delta Chat make a catastrophically bad decision and take the app in an undesirable direction, users can take the code and fork the project. This contrasts with closed-source apps from corporations that can take their products in any direction they like. By relying on free software instead of closed-source programs, you actually control your computing. I’ve spoken at length about how running this type of software is like owning your own home rather than renting it. The same applies here; if you use Delta Chat, you don’t need to worry about it going away in the future. Whether it is Telegram, WhatsApp, or Messenger, you are required to register a username and password to use these services. A major flaw in this design is that anyone can try various passwords and potentially break into your account with your complete chat history intact. Sure, there is encryption in Messenger, where you need a second PIN and two-factor authentication in Telegram, but breaches happen all the time. Unlike before, when you used to sign in to your email account to send and receive messages, the primary way to do it now is to create an account on a chatmail relay. The resulting email address is a random string followed by the name of the relay you pick. This means you can start and begin adding contacts Without a username and password, you either need to ensure you have a backup or at least one device running your Delta Chat profile. The primary way to log in on another device is to go to the settings and add a second device. Then, you’ll just scan a QR code with your new device, and it’ll log in to your account and sync all your chat history and contacts. To end users, Delta Chat just looks like any instant messenger; however, it is really sending your messages as encrypted emails to your contact. This is pretty cool from a censorship perspective, as it makes the service more difficult to block. Previously, the main way to use the app was by logging in with email, but nowadays, it’s recommended that you use chatmail relays. Chatmail relays temporarily hold messages in case your device is offline. They are cheap, simple servers that don’t store data as group states. Other information, like your name and avatar, only exists on your device and the devices of those you share your contact information with. The relays are also decentralized and operated by various groups and individuals. It is even possible to set up your own chatmail relay, but most people will want to use one hosted elsewhere. To keep your messages secure, Delta Chat uses a secure subset of the OpenPGP standard that gives you automatic end-to-end encryption. It also uses Secure-Join to exchange encryption setup information through QR-code scanning or invite links. Autocrypt is also used to automatically establish end-to-end encryption between contacts and all members of group chat, but sometime this year Autocrypt v2 will be rolled out, bringing post-quantum resistant encryption and forward secrecy. The Delta Chat FAQ is an interesting read that explains many more details about the app. Credit: Pexels Delta Chat is unique among messaging apps because it is built on email, a technology that’s decades old and isn’t going anywhere soon. What’s more is that email is not centralized either, so it’s far more difficult for any authoritarian regime to disrupt the Delta Chat app. I haven’t spoken too much about features yet, so I will do that now. Delta Chat allows you to do one-on-one chats, group chats, and create channels. It also supports file sharing and making audio and video calls when chatting one-to-one, but it’s not available for group chats right now. At the time of writing, the calling functionality is disabled and can be enabled in Settings > Advanced > Debug Calls. I have used the video calling feature, and the quality is excellent. It works over WebRTC, another open standard. The app also lets you send voice notes, enables disappearing messages, and has its own app ecosystem. I did try playing chess one time there, but it was a bit spotty; though, we did manage to complete the game with a victory for me. To add people to Delta Chat, you can either give them your Delta Chat link or your QR code to scan. These are the only ways to add users, so you won't have any spam bots bothering you. If the people you want to chat with don't have the app yet, just send them your link, and it will take them to a webpage where they can install the app and then add you. It's really quick for them to install it and get started, which is nice. Credit: Microsoft. The Majorana 2 quantum chip unveiled in 2026. I do not think quantum computers are too far out now, and I do hope that Delta Chat is able to push out Autocrypt v2 sooner, rather than later, so bad actors do not attempt to collect encrypted communications and then decrypt them in the future using quantum computers. By getting people’s messages post-quantum-safe now, users won’t have to worry when quantum computers start cracking legacy encryption. Overall, I would recommend this app to people who are already past WhatsApp and Messenger and have perhaps begun using apps like Telegram or Session. It shares a lot of characteristics with these apps and goes a lot further than Telegram in terms of security. By being based on email, it is also resistant to censorship, and the lack of a username and password makes you anonymous (if you want to be) and safe from brute force password cracking attempts. Let me know in the comments if you’ve tried Delta Chat recently. Do you think it's a good bulwark against governments that are tightening their grip on the internet?
    • Putin was behind Farage/Brexit and behind Trump/MAGA. Different idiot lying beasts, same fascist master. Same screwed up results for both nations.
    • For me the Final Fantasy games, Langrisser I & II, Hardspace: Shipbreaker, Horizon Forbidden West Complete Edition, Metaphor: ReFantazio and LUNAR Remastered Collection
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      217
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!