Recommended Posts

It peels vegetables: Rich winter stews call for peeled tomatoes but meticulous peeling is a drag. After washing and cutting tomatoes in half, place them cut-side down in the microwave and heat for five minutes until the skin has shriveled around the edges. Then, gently slide them off with a fork or even your fingernails.

It warms bath towels: Baby, it's cold outside! Post-shower, warm up quicker by placing slightly damp towels in a large ziplock bag, then pop them in the microwave for a couple of minutes. "Not all plastic bags are microwave-safe so check the box first," says Snyder.

It gets gum off your clothes: Parents will love this?if your kid got chewing gum stuck on their clothes (or, ahem, yours), warm one cup of vinegar in the microwave for a minute or so, then dab it on the gum with a clean cloth until it's gone. Presto!

Dye clothes:

Transform faded T-shirts with this speedy trick. Prepare the fabric by scrunching, knotting, twisting or folding - tie all fabrics tightly.

Wearing rubber gloves, empty a pack of Dylon natural fabric dye carefully into a bowl and gradually add 250 ml of warm water. Stir thoroughly to ensure dye is dissolved.

Add further 250 ml. Put the bowl into a plastic freezer bag and microwave on high for four minutes.

Remove, tip away the dye and rinse the fabric in cold water, leaving the knots in place until the water runs clear. Dry away from direct heat or sunlight.

It soothes menstrual cramps: You can always use a heating pad if you have killer period cramps but if you don't own one, fill a large cotton sock with a mix of grains or lentils and sew the open end closed. Pop it in the microwave for two minutes, then place on your abdomen. Sweet relief! "Since beans have a low water content, place a glass of water in the microwave so the water will produce friction, absorbing the radiation and helping to warm the towel," says Sue Snyder, Ph.D., Professor of Animal and Food Sciences at the University of Delaware.

It sterilizes soil: Got a green thumb? Head to the kitchen before the garden. Before planting seedlings, sterilize your soil to remove bacteria so your seeds thrive. Spread about 400g of soil on a flat, non-metal dish, then heat on high until the soil starts steaming. "Make sure the soil is thoroughly stirred so the heat dissipates throughout. You'll have to experiment with how long you cook it but heating for 90 seconds will at least reduce the amount of bacteria," says Snyder.

It dries herbs: Keep thyme and oregano fresh by drying them out in the microwave. Just wash, then lie them out on a paper towel, heating in 30 seconds blasts until they're dry.

It freshens up packaged food: Don't toss stale crackers and cereal. Pour on a plate and zap in the microwave for 30 seconds.

Whip up scrambled eggs and bacon:

Michelin-starred chef Marco Pierre White says microwaved bacon tastes better than grilled (and it saves on the washing up, too).

For easy bacon and eggs, crack the eggs into a buttered, microwavable bowl, add a tablespoon of milk and whisk.

Cook on full power for a minute, remove and stir, then microwave at 30-second bursts (stirring at the end of each) until solid. For the bacon, put four rashers on a plate and microwave for 2½ minutes.

Make a giant marshmallow:

If your children complain of being bored, make their eyes pop with this little trick.

Put a marshmallow in the microwave and heat for no more than a minute. Stand back and watch as the marshmallow slowly expands to five, ten, 20, 30 times its normal size.

Wash socks simply:

Washing machine broken? Not enough clothes for a full load? Not to worry. Wash your socks by putting them in a large bowl of soapy water for ten minutes on a high power setting. :huh:

more

Along the lines of the marshmallow trick, you can also have Peep jousting duals:

Pit a tooth pick into the side of a Peep, place two of them a few inches apart in the microwave, start the microwave and watch the battle! :rofl:

peep_jousting_1.jpg

  • Like 1

I remember reading instructions for my grandmas microwave that said, to test if it is working... duh.... place a lightbulb into the top of a glass of milk with the metal in the milk and turn on the microwave, if the bulb lights up, the microwave is working...

It also stated that this will kill the bulb!

Along the lines of the marshmallow trick, you can also have Peep jousting duals:

Pit a tooth pick into the side of a Peep, place two of them a few inches apart in the microwave, start the microwave and watch the battle! :rofl:

peep_jousting_1.jpg

I HATE PEEPS!!!!!

so this is something I wanna do!!!!

This topic is now closed to further replies.
  • Posts

    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!