i5 build - will these work together?


Recommended Posts

Goals,

1. PC that would last four years or so (with upgrades).

2. General use, development, and gaming (GW2 & Witcher 2).

3. Should run cool, be very stable, and have some room for OC (later).

4. Strictly Intel for CPU and NVIDIA for GPU. (i7 is too expensive)

5. Sweet spot @ ~1000 USD

6. Everything will be ordered Friday

Concerns,

1. Difficulty of build (never done this before).

2. Components not fitting together and/or not being compatible with each other.

3. Bottlenecking performance somewhere.

4. Forgetting some important component.

With help of Newegg, Google, and YT, I have made the following selection,

CPU,

Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I53570K

Motherboard,

ASUS P8Z77-V LK LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS

CPU cooler,

COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 "Heatpipe Direct Contact" Long Life Sleeve 120mm CPU Cooler Compatible with Intel 1366/1155/775 and AMD FM1/FM2/AM3+

Case,

Rosewill CHALLENGER Black Gaming ATX Mid Tower Computer Case, comes with Three Fans-1x Front Blue LED 120mm Fan, 1x Top 140mm Fan, 1x Rear 120mm Fan, option Fans-2x Side 120mm Fan

PSU,

Rosewill HIVE Series HIVE-650 650W Continuous @40?C, 80 PLUS BRONZE Certified, Modular Design, Single +12V Rail, ATX12V v2.31/EPS12V v2.92, SLI Ready, CrossFire Ready, Active-PFC Power Supply

RAM,

G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-1600C9D-16GXM

GPU,

EVGA SuperClocked 02G-P4-2662-KR GeForce GTX 660 2GB 192-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card

SSD (OS),

Kingston HyperX 3K SH103S3/120G 2.5" 120GB SATA III MLC Internal Solid State Drive (SSD) (Stand-Alone Drive)

HDD (Storage),

Western Digital WD Black WD1002FAEX 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive

BD,

LITE-ON Black 4X BD-ROM 8X DVD-ROM 32X CD-ROM SATA Internal 4X Blu-ray Reader Model iHOS104-06 - OEM

Link to comment
https://www.neowin.net/forum/topic/1132120-i5-build-will-these-work-together/
Share on other sites

personally I'd switch out the PSU with one that's at least silver certified, but besides that everything else looks fine

you shouldn't really have any spacing issues with a standard ATX size build and the parts your choosing

personally I'd switch out the PSU with one that's at least silver certified, but besides that everything else looks fine

you shouldn't really have any spacing issues with a standard ATX size build and the parts your choosing

Alright, will take advice on the PSU.

One more thing, what about noise?

How bearable would it be to, say, have such a PC at high load in your bedroom overnight? (Although a more likely situation would be to download steam games overnight doing nothing else)

Alright, will take advice on the PSU.

One more thing, what about noise?

How bearable would it be to, say, have such a PC at high load in your bedroom overnight? (Although a more likely situation would be to download steam games overnight doing nothing else)

the better PSU will be worth it, every little bit helps with the power efficiency IMO. your electric bill will thank you in the long run

and as far as the noise goes, it all depends on a few things, 1. the noise rating on the psu (the psu is usually the biggest factor, usually it will say if it's a super quiet PSU). 2. your CPU fan (and it looks like the one you have chosen will be just fine in that regard). 3. the fans in the gpu

over all if looks like the build you have laid out will be pretty quiet so you shouldn't have to worry too much (and honestly if you're anything like me, a little white noise at night is soothing :p)

Firstly that's a sweet looking build right there. You will be able to easily overclock that to 4.5GHz but not with the cooler in your spec there. The Noctua NH-D14 air cooler should easily give you temps of 60-70 under max load:

http://www.newegg.co...N82E16835608018

A little pricey but your other option would be water cooling. With the above cooler, those GSkills will not have enough clearance under the fan so switch them out for the following Corsair low profile DIMMs (don't be put off by the 2 x 2 egg reviews, seems like those idiots didn't set their BIOS settings for the DIMMs to X.M.P profile):

http://www.newegg.co...N82E16820233388

Lastly as Brando mentioned switch that PSU with something more reliable:

http://www.newegg.co...N82E16817207017

I've been through a fair few PSU's in my time including noisy PSU's with coil whine issues. I'd avoid Corsair/Seasonics new range as they seem to be plagued with coil whine issues. The XFX PSU above, although double your current specced PSU's price, will last you a good while. It's innards are made by Seasonic but from a range not affected by coil whine noise issues.

You shouldn't really hear that machine above the case fans/GPU fan when its under load. I've never looked into Rosewill cases before but that one seems to have decent reviews so I wouldn't assume you'd have anything to worry about on the noise side.

Firstly that's a sweet looking build right there. You will be able to easily overclock that to 4.5GHz but not with the cooler in your spec there.

O.o

I never was planning on going that far.

I didn't mean 'none at all'

no, what he means is the models with K don't overclock very well if you don't have the right mobo

you'll want this version of the CPU if you plan to overclock at all http://www.newegg.co...N82E16819115233

no, what he means is the models with K don't overclock very well if you don't have the right mobo

you'll want this version of the CPU if you plan to overclock at all http://www.newegg.co...N82E16819115233

I'm confused Brando...You linked the 3570 if he wants to overclock but isn't it the 3570k with the unlocked multipliers for overclocking?

I'm confused Brando...You linked the 3570 if he wants to overclock but isn't it the 3570k with the unlocked multipliers for overclocking?

idk, I might be mixing up the two, i don't know much about over clocking to be honest

Your BD drive doesn't have the ability to burn DVDs or CDs which could possibly be an issue. I very rarely do it, but if you're going to have the drive you should probably get one that can burn DVDs and CDs at least. $25 more gets you one that can burn BD, DVD, and CD.

Also, check if you live near a Microcenter. They have the 3570K for $40 less than Newegg and you also get $40 off a compatible motherboard. I believe most managers will match Newegg's prices, too. They have a 60 day return policy (that in my experience has been no questions asked) in case anything goes wrong.

You also don't have an OS listed. If you plan on using Windows don't forget to take that into consideration.

The 3570k is fine. The k denotes the CPU has an unlocked multiplier thus allowing overclocking. Non k processors cannot be overclocked.

If your not planning on overclocking it by much, I'd stick the the stock cooler & your original choice of ram but my suggestion was based on you wanting something that'd be competitive and give your decent performance for a few years.

Some other questions,

I take it I will have to set the proper memory speed manually (reading up on it - seems like the answer is 'yes')?

Now the i series CPUs have the intel graphics chip on them - and it gets turned off if a PCIe GPU is detected?

What would I expect the temp of the CPU to be (vanilla - as to check that I mounted everything OK)?

JJ is right, though. Any amount of overclocking you do, you want to keep your CPU as cool as possible.

EDIT: Answered as I was writing post

I'm confused Brando...You linked the 3570 if he wants to overclock but isn't it the 3570k with the unlocked multipliers for overclocking?

That confused me too.

Your BD drive doesn't have the ability to burn DVDs or CDs which could possibly be an issue. I very rarely do it, but if you're going to have the drive you should probably get one that can burn DVDs and CDs at least. $25 more gets you one that can burn BD, DVD, and CD.

Also, check if you live near a Microcenter. They have the 3570K for $40 less than Newegg and you also get $40 off a compatible motherboard. I believe most managers will match Newegg's prices, too. They have a 60 day return policy (that in my experience has been no questions asked) in case anything goes wrong.

You also don't have an OS listed. If you plan on using Windows don't forget to take that into consideration.

Noted.

I already have the OS - will be Win 8 x86_64 professional - legal.

There doesn't seem to be one in my state. =(

If your not planning on overclocking it by much, I'd stick the the stock cooler & your original choice of ram but my suggestion was based on you wanting something that'd be competitive and give your decent performance for a few years.

I think, I will skip on the HDD & BD (for the time - I have been living w/ external ones and a netbook problem free anyway) and will go with your suggestion.

The CPU & Motherboard are most difficult to upgrade and in as much getting good ones from the start will save me trouble. =)

Edited by _Alexander

Firstly that's a sweet looking build right there. You will be able to easily overclock that to 4.5GHz but not with the cooler in your spec there.

Of course you can. I've been using the Hyper 212+ to overclock my 2500k to similar clock speeds and very comfortably so, and I'm far from the only one doing it. It's diminutive price tag isn't representative of its performance, really.

I would recommend an Antec HCG620M PSU, Antec uses solid caps in thier PSUs so you don't get dodgy chinese caps.

Also the modular ones are way nice for cable mgmt and air movement.

Excellent CPU cooler. I have the 212 EVO and it's HUGE but very nice. My temps never go above 55C in Skyrim on pretty much max settings.

Normal ops is 38C on the CPU (i5 3570K) and 25C for the GPU (EVGA GF650Ti SSC)

On the SSD:

Avoid Sandforce controllers. Those have lots of problems and are very unstable and have the shortest life span. TONS of people with less then 6 m.o. drives that died.

I recommend a Samsung 830 or 840 pro.

GPU:

Excellent choice. I got the EVGA 650Ti SSC and it's pretty nice.

Got it working together today.

I am very much surprised by how much physical force was necessary to shove things where they belong.

I mean, for all intensive purposes the CPU is under the force of a thousand suns right now.

Some hard points were,

Figuring out how to plugin reset, power, and HDD led

Stuffing the GPU in there, the showing part and the moving all cords out of the way part.

The PSU cords are a pain they are not that bendable.

I don't know where to shove cords - for now they are dangerously close to the fans (The main mobo power plug and the noctua fans plug).

CPU, Memory, and Primary HD: 7.8

Graphics and Gaming Graphics are at 7.9

RAM is in single channel as otherwise I would have needed to remove that hell of earth of a cooler (when upgrading) - so I can improve some of those numbers in the long run.

This is a nice breath of air compared to my netbook's 2.3 for the CPU.

I mean I am transitioning from a primary of a netbook connected to an HDMI monitor to this.

Been running prime95 for half an hour (vanilla 100x38),

Min C / Max C

21 / 49

28 / 55

27 / 55

24 / 49

room tem is 74 farenheit - ~23.3 C says bing

Not sure why Core 1 and Core 2 are hotter than Core 0 and Core 4

W8x64 boots under 3sec

I mean, for all intensive purposes the CPU is under the force of a thousand suns right now.

comic2-1852.png

... hem, anyway, back to the topic. For cords you can tie then together with tie-wraps or whatever you have, those that tend to be loose in the case I just tape them to a nearby side. People who do it properly route them through the back of the case so there are no cables at all hanging around, but it's not really necessary.

This topic is now closed to further replies.
  • Posts

    • Nothing kills CMF Phone 2 Pro's successor due to rising memory prices by Hamid Ganji Storage and RAM prices have been rising over the past year, leading to a significant increase in the cost of electronics for customers around the world. Many companies are now revising their plans for upcoming devices due to higher component costs and overall production expenses. CMF is the latest company to cancel the successor to one of its best-selling phones due to rising memory prices. CMF is a sub-brand of Nothing and focuses on making budget smartphones for growing markets. The brand launched the CMF Phone 2 Pro last year with some eye-catching specifications and an affordable price. While many customers may have been waiting for a successor this year, one of the company’s executives has announced that CMF will not release a new smartphone this year. And AI is to blame. As Nothing co-founder Akis Evangelidis announced on X, the company has been working on a successor to the CMF Phone 2 Pro, but with current memory prices, it cannot “build a phone that feels like a genuine step forward at a price that makes sense for CMF.” So, no new CMF phone will be launched this year. Meanwhile, Evangelidis said the company still has several new products in the pipeline, including some in entirely new categories. He added that the Nothing brand will also continue launching new products through 2026. Budget smartphones are among the first victims of the surge in RAM and memory prices, as they have become more expensive to build. The sharp increase in memory costs could also reshape the traditional price ranges associated with budget phones. Apple CEO Tim Cook also recently said that price increases for some of the company’s products are unavoidable because RAM and memory have become significantly more expensive this year. Analysts estimate that the base price of the upcoming iPhone 18 Pro could rise to $1,399 due to current market shortages.
    • Nudge me when they bring back hardware audio acceleration so I can get my EAX 5 back. We've evolved graphics to real-time path tracing, but regressed audio some 15 years back in time with this stupid software audio stack.
    • Ocenaudio 3.19.4 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.4 changelog: Adds fallback fonts so every language and symbol displays correctly Improves autosave and session recovery stability Improves region navigation and display Fixes a crash when the level meter is used on displays with a scaling greater than 200% Fixes memory corruption when using the silence selection tools Fixes crashes when closing a file while effects are still being processed Fixes a freeze when applying effects to many files at once (macOS) Fixes crashes related to audio devices on Windows Fixes invalid file names when exporting regions whose label is used as the file name Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hasleo Disk Clone 5.8.2.1 by Razvan Serea Hasleo Disk Clone is a free and all-in-one disk cloning software for Windows 11/10/8/7/Vista and Windows Server that can help you migrate Windows OS to another disk, clone one disk to another disk or clone one partition to another location quickly and efficiently. Completely Free Windows Migration and Disk/Partition Cloning Software Migrate Windows from one disk to another without reinstalling Windows, apps. Clone one disk to another and makes the data on 2 disks are exactly the same. Clone a partition to another location without losing any data. Easily adjust the size and location of the destination partition. Convert MBR to GPT or convert GPT to MBR by cloning. Creation of Windows PE emergency disk. Extremely fast cloning speed and multi-language support. Supported OS: Windows Vista/Server 2008 or later, fully compatible with GPT and UEFI. Hasleo Disk Clone 5.8.2.1 changelog: Fixed an issue that caused disk enumeration to fail Fixed an issue where WinPE created under Windows ARM64 26H1 did not work properly Download: Hasleo Disk Clone 5.8.2.1 | 32.3 MB (Freeware) Link: Hasleo Disk Clone Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This got me thinking, would you rather a self driving car prioritise protecting its passengers or everyone else? I'd choose the one that keeps me and my kids safest. At some point, these cars have to make those choices already, don't they? Wonder if we have a way to find out what way they lean.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      546
    2. 2
      +Edouard
      188
    3. 3
      Michael Scrip
      78
    4. 4
      PsYcHoKiLLa
      74
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!