Which is your favourite motherboard of all time?


Recommended Posts

I'm feeling a bit nostalgic here. Recently my trusty old A8N-SLI Deluxe bit the dust. It was the first computer that I fully built by myself so I was sad to see it go.

In that time I had replaced the noisemaker fan on the chipset with a heatpipe from an A8N-SLI Premium, and learnt a lot about overclocking and hardware in general from this board.

In the end the thermal paste between the MOSFETs and the heatpipe didn't hold up after so many years of constant use.

I consider it a piece of history, as it was one of the first decent Socket 939 boards (and with SLI) bringing in the 64-bit era. I can't believe how much money I spent on a 6800GT which is worse than integrated graphics by todays standards. Within 6 months after that was released it was already obsolete and considered mid-range, and then low-range shortly after.

It was preceded by an ECS K7S5A, also legendary, which bit the dust a few years earlier after finally giving in to all the torture it was put through (Have of it's life without working USB Ports which short circuited, and used a PCI USB card instead). This one I did not fully build from scratch (only pulled it apart from someone else's build and fully rebuilt it again) so not as special.

edit: I just remembered (suppressed memory). Between the ECS and Asus, I also had a Gigabyte P4 board. It was so bad, I want to forget, I can't even recall the model number.

I don't know if I am so fond of it because it was my first build or because it was awesome.

What has been your favourite motherboard of all time?

Honestly, I've been pretty fortunate with every motherboard I've had. I believe all the ones I still have are still working. The worst I ever had was a Biostar that I ordered from Newegg. It went into my Q6600 build and right after install it failed me. Returned it for a Gigabyte and haven't looked back. I also had an MSI board that I think is still working to this day. As far as a specific favourite, I'd have to say either my ASRock I used for my old 939 or my Gigabyte UD3LR for my Q6600. The ASRock is still working and reliably so. While it's overclocking options were very basic, it was an innovative board based solely on the fact that they were selling adapters to allow your board to support the AM2 chips - It was a nice way to allow consumers a direct path to upgrading without having to replace their entire motherboard (and to keep the money with ASRock.) My UD3LR was my first "higher end" motherboard and one that had all the features I could want for overclocking. Set up was easy, the board has been reliable and it's sturdy as hell.

Yea I have never really had any problems with any of the motherboards I have had, of course I used to upgrade often.

The one I have now, which is on the way out is an EVGA 780i SLI, which has been good, but is dyeing slowly. It is though, over 6 years old I believe.

MSI KT4 Ultra, had an Athlon XP 1700+ and overclocked the arse off it with DDR400 RAM, had 6 ram slots, AGP x8, 6x PCI slots the first proper 'performance' board I bought. Was a cheap version of the nForce2 chipset that was really unstable. Was a nice upgrade from my Duron 700Mhz KT3 motherboard.

I would have picked another but I was too young to remember, it was an Intel chipset board with Intel Celeron 300A, bodged an Intel P3 heatsink to it and managed to get 300Mhz overclock out of it.

Damn those where the days.

ASUS BE6 with a Celeron oc to 450. It was pretty hot at the time. I also still have a DFI Lanparty 939 board with an Opteron.

Thats it!

ABIT BX6 board managed to get a cherry picked Celeron 300A to 600Mhz, I love it when PCs were niche and not every moron had one.

ASUS P4V800D-X, overall it's an astonishingly **** motherboard, and is full of such great bugs like turning it on with a PCI-Express graphics card and turning it off again will then cause each subsequent boot to just beep that no GPU was detected until you remove the GPU and plug it back in... (And yes, boot up will then go fine until power off whereby you will again have to repeat the cycle of removing the GPU and putting it back...)

What I love about it however is that it's the only socket 478 motherboard with a PCI-express slot on it! Shame ASUS didn't do it right at all though.

As far as a specific favourite, I'd have to say either my ASRock I used for my old 939 or my Gigabyte UD3LR for my Q6600. The ASRock is still working and reliably so. While it's overclocking options were very basic, it was an innovative board based solely on the fact that they were selling adapters to allow your board to support the AM2 chips - It was a nice way to allow consumers a direct path to upgrading without having to replace their entire motherboard.

I have built many computers, mainly for work. The only home PC i've built uses (yes, still uses) an ASRock 939 Dual Sata2. Still in use every day, never uprgraded to AM2 though. At the month end will be upgrading the PC to Windows 8 and hopefully add another gig of memory - running 1GB at the minute.

I have not had any problems with the motherboard even though at the time people online were commenting on it being a cheap brand.

MSI KT4 Ultra, had an Athlon XP 1700+ and overclocked the arse off it with DDR400 RAM, had 6 ram slots, AGP x8, 6x PCI slots the first proper 'performance' board I bought.

Yup, same here. Never had a problem with that board although I absolutely HATED VIA chipsets.

I like my current ASUS board but the audio just died out on me after 8 months. Not sure how I feel about that.

Wasn't the best ever made, but I'm biased to the one who helped me dive into the computer realm, DFI Lanparty Ultra D 939. Still using it right now to write this up. Its been my workhorse, unfortunately it seems its about to bite the dust. Will always be remembered...

  • Like 2

Hello,

Of all time? Probably the AMI Enterprise III Series 68 motherboard, for Intel 80486 (and Pentium OverDrive) CPUs. This was a server-grade motherboard that could take 256MB. Not a lot by today's standards, but when it came out, anything about 8MB was a lot of RAM.

Regards,

Aryeh Goretsky

I think mine was the Asus Rampage Formula which was running a Q6600. I oath, best board I have ever owned, and that sound card!!!! I miss that beast. I am also starting to like my current board, GA-Z77x-UD3H. Am having no issues with it. But Asus and the ROG, epic stuff. I need another one....

I loved my DFI NFII Ultra Infinity... It had character - you could stay up all night to find the perfect settings and stable clock rates and the final working settings would make no sense to you whatsoever.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Very fitting name since AI users have air where there brains should be.
    • Yes, it was amusing at the time because even then dbrand was well known for stealing the designs of products from other companies. That’s what they do.
    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      532
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      57
  • Tell a friend

    Love Neowin? Tell a friend!