Which is your favourite motherboard of all time?


Recommended Posts

I'm feeling a bit nostalgic here. Recently my trusty old A8N-SLI Deluxe bit the dust. It was the first computer that I fully built by myself so I was sad to see it go.

In that time I had replaced the noisemaker fan on the chipset with a heatpipe from an A8N-SLI Premium, and learnt a lot about overclocking and hardware in general from this board.

In the end the thermal paste between the MOSFETs and the heatpipe didn't hold up after so many years of constant use.

I consider it a piece of history, as it was one of the first decent Socket 939 boards (and with SLI) bringing in the 64-bit era. I can't believe how much money I spent on a 6800GT which is worse than integrated graphics by todays standards. Within 6 months after that was released it was already obsolete and considered mid-range, and then low-range shortly after.

It was preceded by an ECS K7S5A, also legendary, which bit the dust a few years earlier after finally giving in to all the torture it was put through (Have of it's life without working USB Ports which short circuited, and used a PCI USB card instead). This one I did not fully build from scratch (only pulled it apart from someone else's build and fully rebuilt it again) so not as special.

edit: I just remembered (suppressed memory). Between the ECS and Asus, I also had a Gigabyte P4 board. It was so bad, I want to forget, I can't even recall the model number.

I don't know if I am so fond of it because it was my first build or because it was awesome.

What has been your favourite motherboard of all time?

Honestly, I've been pretty fortunate with every motherboard I've had. I believe all the ones I still have are still working. The worst I ever had was a Biostar that I ordered from Newegg. It went into my Q6600 build and right after install it failed me. Returned it for a Gigabyte and haven't looked back. I also had an MSI board that I think is still working to this day. As far as a specific favourite, I'd have to say either my ASRock I used for my old 939 or my Gigabyte UD3LR for my Q6600. The ASRock is still working and reliably so. While it's overclocking options were very basic, it was an innovative board based solely on the fact that they were selling adapters to allow your board to support the AM2 chips - It was a nice way to allow consumers a direct path to upgrading without having to replace their entire motherboard (and to keep the money with ASRock.) My UD3LR was my first "higher end" motherboard and one that had all the features I could want for overclocking. Set up was easy, the board has been reliable and it's sturdy as hell.

Yea I have never really had any problems with any of the motherboards I have had, of course I used to upgrade often.

The one I have now, which is on the way out is an EVGA 780i SLI, which has been good, but is dyeing slowly. It is though, over 6 years old I believe.

MSI KT4 Ultra, had an Athlon XP 1700+ and overclocked the arse off it with DDR400 RAM, had 6 ram slots, AGP x8, 6x PCI slots the first proper 'performance' board I bought. Was a cheap version of the nForce2 chipset that was really unstable. Was a nice upgrade from my Duron 700Mhz KT3 motherboard.

I would have picked another but I was too young to remember, it was an Intel chipset board with Intel Celeron 300A, bodged an Intel P3 heatsink to it and managed to get 300Mhz overclock out of it.

Damn those where the days.

ASUS BE6 with a Celeron oc to 450. It was pretty hot at the time. I also still have a DFI Lanparty 939 board with an Opteron.

Thats it!

ABIT BX6 board managed to get a cherry picked Celeron 300A to 600Mhz, I love it when PCs were niche and not every moron had one.

ASUS P4V800D-X, overall it's an astonishingly **** motherboard, and is full of such great bugs like turning it on with a PCI-Express graphics card and turning it off again will then cause each subsequent boot to just beep that no GPU was detected until you remove the GPU and plug it back in... (And yes, boot up will then go fine until power off whereby you will again have to repeat the cycle of removing the GPU and putting it back...)

What I love about it however is that it's the only socket 478 motherboard with a PCI-express slot on it! Shame ASUS didn't do it right at all though.

As far as a specific favourite, I'd have to say either my ASRock I used for my old 939 or my Gigabyte UD3LR for my Q6600. The ASRock is still working and reliably so. While it's overclocking options were very basic, it was an innovative board based solely on the fact that they were selling adapters to allow your board to support the AM2 chips - It was a nice way to allow consumers a direct path to upgrading without having to replace their entire motherboard.

I have built many computers, mainly for work. The only home PC i've built uses (yes, still uses) an ASRock 939 Dual Sata2. Still in use every day, never uprgraded to AM2 though. At the month end will be upgrading the PC to Windows 8 and hopefully add another gig of memory - running 1GB at the minute.

I have not had any problems with the motherboard even though at the time people online were commenting on it being a cheap brand.

MSI KT4 Ultra, had an Athlon XP 1700+ and overclocked the arse off it with DDR400 RAM, had 6 ram slots, AGP x8, 6x PCI slots the first proper 'performance' board I bought.

Yup, same here. Never had a problem with that board although I absolutely HATED VIA chipsets.

I like my current ASUS board but the audio just died out on me after 8 months. Not sure how I feel about that.

Wasn't the best ever made, but I'm biased to the one who helped me dive into the computer realm, DFI Lanparty Ultra D 939. Still using it right now to write this up. Its been my workhorse, unfortunately it seems its about to bite the dust. Will always be remembered...

  • Like 2

Hello,

Of all time? Probably the AMI Enterprise III Series 68 motherboard, for Intel 80486 (and Pentium OverDrive) CPUs. This was a server-grade motherboard that could take 256MB. Not a lot by today's standards, but when it came out, anything about 8MB was a lot of RAM.

Regards,

Aryeh Goretsky

I think mine was the Asus Rampage Formula which was running a Q6600. I oath, best board I have ever owned, and that sound card!!!! I miss that beast. I am also starting to like my current board, GA-Z77x-UD3H. Am having no issues with it. But Asus and the ROG, epic stuff. I need another one....

I loved my DFI NFII Ultra Infinity... It had character - you could stay up all night to find the perfect settings and stable clock rates and the final working settings would make no sense to you whatsoever.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • 0 chance of that happening, forget it. Get it installed by some tech guy or do it yourself with the bypasses, that's how MS is being lenient and looking the other way to give users a chance.
    • Ooooooh, now we got the big tech corps fighting
    • Segra 1.6.3 by Razvan Serea Segra is a free, open-source OBS-powered game recorder offering fast gameplay capture, instant clips, AI highlights, deep game integration, and seamless uploads—perfect for gamers, streamers, and content creators. Lightweight, fast, zero bloat. Segra key features: Automatic Game Recording: Begin capturing gameplay the moment your game launches, with zero manual setup. Instant Clipping: Save important moments instantly using a customizable hotkey—perfect for highlights, montages, or quick shares. Segra AI Highlights: Let Segra automatically detect kills, assists, deaths, and key events to generate polished highlight reels without manual editing. Gameplay Uploads: Upload recordings and clips directly to Segra.tv for fast sharing and cloud access. Deep Game Integration: Enjoy advanced game-data tracking across hundreds of supported titles, enabling smart highlight generation and stat-informed clipping. High-Performance Capture: Record up to 4K at 144 FPS using OBS-powered technology with minimal performance impact, supporting NVENC, AMD VCE, and custom quality controls. Segra Editor: Edit recordings easily with timeline controls, segment management, and event-based navigation to build the perfect clip. Customization Options: Adjust hotkeys, output formats, storage paths, codecs, capture quality, and performance settings for a tailored recording experience. Segra 1.6.3 changelog: Recording: Reworked the whitelist/blacklist into per-game recording with individual setting overrides. Settings: Added Windows Game Mode and Startup window mode options. Audio: Improved noise suppression for microphone capture. Clips: Added a separate export mode for segment clips. Updates: Fixed pending update state not showing by replaying it when the frontend reconnects. Recording: Fixed an issue where audio could break or sources could linger between recordings. Stability: Fixed a rare crash that could happen when a game closed. Settings: Fixed settings not applying correctly on some non-English systems. Download: Segra 1.6.3 | 74.5 MB (Open Source) View: Segra Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • So, recently, I saw on the news (yes, on this website) that Samsung is introducing features where it can provide education using AI-powered sets, and because of this, I got concerned about whether the AI gives out wrong info during education sessions, causing controversies in the process. What are your thoughts on this? 
    • TCL's Bang & Olufsen soundbar is 40% off on Amazon by Ivan Jenic The TCL Design Series A65K is currently $299.99, down from $499.99. That's 40% off and $200 saved on a soundbar tuned by Bang & Olufsen, which is not a combination you'd normally expect at this price point (purchase link below). Bang & Olufsen doesn't typically show up in the sub-$500 category. The Danish audio brand is known for speakers that cost several times more, so having their acoustic tuning on a $300 soundbar is very appealing. TCL handles the hardware, B&O handles the sound engineering, and the result is what the company calls "accessible luxury." Still, accessible luxury isn’t full-fledged luxury, so don’t expect wonders. But this is a decent soundbar, nevertheless. The A65K is a true 3.1.2 channel system with nine physical drivers, including genuine up-firing height speakers for Dolby Atmos and DTS:X. Many soundbars at this price simulate overhead effects through virtual processing, rather than actual hardware. So, you’re getting the real deal. The design is unusually slim for a system with Atmos compatibility. The bar is just under 2 inches deep and should fit beneath most TV screens. The wireless subwoofer is also compact at roughly 14 x 14 x 5 inches. Total output is 460W, and you can connect to the soundbar via HDMI eARC, Bluetooth 5.3, or USB. There are also eight sound modes through the TCL Home app and an AI calibration capability. Although it’s worth mentioning that AI capabilities in most of these devices are inconsistent, to say the least, and that shouldn’t be the biggest selling point. Still, at $299.99, the A65K is a strong buy for anyone who wants a soundbar that sounds and looks noticeably better than what this price range usually offers. And the Bang & Olufsen branding surely sounds nice - pun intended. TCL Design Series Bang & Olufsen A65K - $299.99 | 40% off on Amazon Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      529
    2. 2
      +Edouard
      263
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      96
    5. 5
      macoman
      59
  • Tell a friend

    Love Neowin? Tell a friend!