Recommended Posts

Why did you run testdisk? It is designed to recover your partition table. By virtue of the fact that Ubuntu still boots from the same hard disk, the partition table is probably OK. Even if it wasn't, you should NEVER use testdisk to modify the partition table on your system disk! Can you elaborate on why Vista is not booting? It might be more productive if we started this discussion from there.

Might run Fix BOOT from Vista command prompt:

http://www.proposeds...covery-console/

Nevermind , that's gone from Vista -- probably need to do a Repair install of Vista.

Save, back-up important personal files first.

In order to start the Windows Recovery Environment you must boot your computer off of the Windows Vista DVD that you purchased or that came with your computer. To start this process, insert the Vista DVD into your DVD drive and turn your computer on. Your computer will start and you should see your BIOS listing your hardware and other information.

http://www.bleepingc...startup-repair/

The Windows Vista disc can fix a lot of startup issues. Though honestly it's not clear what the problem is on your end, you haven't mentioned any errors, or even what happens when you attempt to start Windows on your computer.

The Testdisk output seems to indicate that all your partitions are there, but like xorangekiller mentioned you probably don't need Testdisk unless you specifically have an issue with your partitions(s) or need to recover data off the hard drive.

I ran Testdisk because I thought there might be a problem with the Windows partition on the hard disk (I'm a novice). I get different behavior when I try to boot Vista. Sometimes I'm forced into a chkdsk that never finishes. Other times, the desktop loads, but if I click anything, the machine just hangs. I have to force shutdown with the power button.

Vista came already installed on the computer and I don't have a repair disk.

Not much you can do then.

I think it's clear that your Vista partition is messed up.

Maybe you can borrow a Vista dvd from someone to repair it.

I don't know if something like Partition Magic would help.

Example:

http://www.partition-tool.com/

It sounds like your hard drive may be developing problems. Is Ubuntu installed on the same hard drive or a different one? If its on the same one, is it slow to boot or does it report any disk I/O errors?

In Ubuntu, open Disk Utility, select your hard disk, and click "SMART Data". That should tell you whether the hard drive is physically having problems (most likely developing bad sectors by your description), or the issue lies elsewhere. Particularly pay attention to the "Read Error Rate", "Reallocated Sector Count", "Seek Error Rate", and "Current Pending Sector Count". Those are the most likely attributes to indicate a problem. DON'T GO BY THE OVERALL ASSESSMENT! It will often say "Disk is Healthy" unless your disk is in VERY bad shape.

Also, testdisk is an expert tool. You definitely shouldn't be using it if you're not sure EXACTLY what you're doing. While it can be used to recover from complex failures, it can also very easily be used to cause damage that is difficult to repair.

You're right Hum; I forgot the OP said it is a laptop. He may have two hard disks in his laptop, but its very unlikely. I should have assumed that Ubuntu is installed on the same disk as Vista. Consider my previous post amended accordingly. (I can't edit it anymore.) My main point and instructions are still valid, though. In context, its a fairly trivial detail.

Bad sectors are "reparable" in some cases. Your hard disk has a reserved area where a very small number of sectors can be remapped. However, if a sector cannot be remapped, either because the reserved space is full or for some other reason, then its time to backup your data and get a new hard drive.

Try running HDAT2 to repair the bad sector. After it completes, reboot back into Ubuntu and check the "Current Pending Sector Count" in Disk Utility again. If it has dropped to zero, make sure there are no other errors reported by SMART, and try starting Vista again. Even if all the bad sectors have been repaired, its likely you will have to run chkdsk on your Windows partition before it will boot.

Thanks for your help! Here's the result of Disk Utility...looks like bad sectors. Is this the end for my laptop? Will the Ubuntu side die eventually too?

You should really back up your data ASAP. The more you use the laptop the more bad sectors you're going to get.

Back up the data onto a USB drive or something similar. Ubuntu & everything else on the hard drive will eventually be unreadable.

The laptop itself is fine, you'll just need to have a new hard drive installed & then re-install Windows/Ubuntu from scratch.

It is definitely a good idea to backup your important data - which you should be doing regularly anyway - but a couple of bad sectors does not automatically mean the end of your hard disk. It is sometimes possible to remap bad sectors and for the disk to be completely usable for years after. However, the fact that your disk somehow developed bad sectors does make it more likely that you will get more, even if the ones you have can be remapped. If this is your primary computer, I would recommend preemptively ordering a new hard drive for it. Otherwise if you don't rely on it every day, I would wait to see if the sectors can be remapped before ordering a new disk.

This topic is now closed to further replies.
  • Posts

    • It depends on how technical of an answer you want. Does it stop manufacture drivers? Yes, the universal driver is the only thing that interfaces with the printer hardware. However, print support apps (PSAs) are the new way to provide that functionality you speak of, and they integrate directly into the print dialog box, so the user doesn't see any difference at all. This is nothing new...this has been the preferred way to do print drivers for almost 8 years! The only thing changing here is that the older printer model drivers of the past are being deprecated. I highly suspect that you yourself have installed a print support app described as a driver package from the manufacture's support page, had it work exactly as expected, without realizing it was using the universal IPP driver under the covers. For example, USB keyboards have all used the generic HID driver for just about as long as they have existed, but that doesn't stop manufacture "drivers" from enabling more features.
    • https://www.neowin.net/news/microsofts-captionbot-will-try-to-caption-any-picture---as-long-as-hitlers-not-in-it/ The early days of "AI"!
    • Wow..... 1.8GB of RAM usage. That's just a bit more than MS Teams or VS Code uses.
    • its slower than ever. especially on mobile ios. really poor app. Slack is a million times better. shame the company i work for moved from Slack to teams few years back. was like moving from 2026 to windows ME.
    • Manufacturers will be able to ship printer-specific functions through their support apps (their companion software, in other words). But no, drivers won't be needed from them anymore, only the universal one included with Windows. Think about this as printers all agreeing to a stardandized API for common functions, all talking the same language and supporting the most common functionality via that API, so only a single driver is needed to talk to them. Any additional functionality not handled by that driver will be provided by the companion software for the printer.
  • Recent Achievements

    • One Month Later
      Sopa flores earned a badge
      One Month Later
    • First Post
      StaticMatrix earned a badge
      First Post
    • Week One Done
      StaticMatrix earned a badge
      Week One Done
    • Rookie
      lamborghiniv10 went up a rank
      Rookie
    • One Month Later
      pinnclepd earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      531
    2. 2
      PsYcHoKiLLa
      209
    3. 3
      +Edouard
      156
    4. 4
      Steven P.
      99
    5. 5
      ATLien_0
      82
  • Tell a friend

    Love Neowin? Tell a friend!