My Linux Based Questions

By +longgonebn
in Linux

 Share

Recommended Posts

Grand Master

+longgonebn Subscriber²

Posted
  • Subscriber²
Posted

Hey,

So I thought since I have been posting quite a few threads lately, and it will probably continue, that I would create a single thread for all my questions.

First question to start the thread off is this...

So I just wiped my drive. I opened up Gparted and deleted and formated the drive. I then installed Ubuntu onto it, booted into the system, and did some updates. I just randomly checked the Trash and there was a file in it that I deleted before I wiped my system.

How is that possible? Now I know most of my other drives have lost+found folders, and I think one might have had one called Trashed. Do they some how hold that information?

Link to comment
https://www.neowin.net/forum/topic/1132972-my-linux-based-questions/
Share on other sites
Grand Master

+longgonebn Subscriber²

Posted
  • Author
  • Subscriber²
Posted

I selected the drive, right click delete (all three partitions, swap etc)

Then Right Click New, created the partition, and that was it. I didn't do another format because I assumed deleting a partition does the same thing.

Grand Master

Xahid

Posted
Posted

lost+found is the folder like recycle bin in Windows it holds the information about the lost files, but since you format (during installation ?), so its weird that it hold the previous information.

Software center is based on Synaptic manager, so both are same for installing/uninstalling programs.

As for as themes, I think it depends on your own taste :)

Grand Master

+longgonebn Subscriber²

Posted
  • Author
  • Subscriber²
Posted

Well seems weird yes, but everything else is fine. So I dunno lol

Well on my previous install I remember uninstalling LibreOffice with Software Centre, then later looking for it in Synaptic and it still having parts of it installed.

Yes I know it comes down to taste, but I have only found mediterranean Night as one I like, would love to see more that people like to see whats out there.

Rising Star

tim_s

Posted
Posted

I selected the drive, right click delete (all three partitions, swap etc)

Then Right Click New, created the partition, and that was it. I didn't do another format because I assumed deleting a partition does the same thing.

What is odd is that had you installed Ubuntu over the newly created partition scheme - this process would have been done twice.

Did you bring anything over from a previous installation?

Contributor

ajcdotme

Posted
Posted

Well seems weird yes, but everything else is fine. So I dunno lol

Well on my previous install I remember uninstalling LibreOffice with Software Centre, then later looking for it in Synaptic and it still having parts of it installed.

Yes I know it comes down to taste, but I have only found mediterranean Night as one I like, would love to see more that people like to see whats out there.

Open terminal and run 


sudo apt-get autoremove
[/CODE]

This'll clean up any installed packages that are no longer needed.

[CODE]
sudo apt-get clean
[/CODE]

And this'll clean up the temp mess left behind.

Grand Master

+longgonebn Subscriber²

Posted
  • Author
  • Subscriber²
Posted

What is odd is that had you installed Ubuntu over the newly created partition scheme - this process would have been done twice.

Did you bring anything over from a previous installation?

No, I have the main drive which was wiped and have Ubuntu installed, then I have 4 other drives with media on it.

Open terminal and run


sudo apt-get autoremove
[/CODE]

This'll clean up any installed packages that are no longer needed.

[CODE]
sudo apt-get clean
[/CODE]

And this'll clean up the temp mess left behind.

Thanks, I will use that.

If I go and try to remove something and get this message. Is it safe to uninstall the application?

post-21166-0-76315300-1359214207.png

Mentor

Karl L.

Posted
Posted

If I go and try to remove something and get this message. Is it safe to uninstall the application?

I can understand how the "ubuntu-desktop" package looks a little intimidating to uninstall. However, it won't actually affect your system in any practical way. It is merely a meta-package that installs nothing by itself but depends on other packages in the repository. That way, if you choose to install "ubuntu-desktop", every package that is included in your release of Ubuntu by default will be installed. If you uninstall it, the packages it depends on will still be installed unless you explicitly choose to remove them. Software Center is probably telling you to remove it because you selected to remove an application it depends on. That's OK. Remove it.

Grand Master

+longgonebn Subscriber²

Posted
  • Author
  • Subscriber²
Posted

Thanks, I figured it would be safe but thought I'd check lol

I'm getting a bit crazy with questions, but seems I am getting more attention here then on the Ubuntu forums at the moment so...

What about a good screensaver? I have been using Electric Sheep for awhile now, the best I could ever find on any OS, but maybe there are some I have missed. Suggestions?

And no one really answered my themes question..I know it's opinion, that's why I come here :)

Mentor

Karl L.

Posted
Posted

My screensaver is a black screen. The days when burn-in was a serious concern for most users have long past. Since I'm not at my computer to see the screensaver anyway, there's no point in choosing one. Of course, that's just my preference. I realize that many people still like to have a nice screensaver.

Grand Master

+longgonebn Subscriber²

Posted
  • Author
  • Subscriber²
Posted

Yea, burn-in is not my concern. I just enjoy a good screensaver and do see it most of the time.

I went and installed the the extras for xscreensaver and there is actually a quite nice matrix screensaver part of it. Going to use that for now.

Grand Master

+longgonebn Subscriber²

Posted
  • Author
  • Subscriber²
Posted

So I came across a new problem today.

I thought it was related to Steam but I just tried another file and have the same issue.

Trying to install applications with .deb files and the Software Centre is giving me an error.

NOT FOUND

There isn?t a software package called ?file:? in your current software sources.

I dunno what I did, I already installed a few programs this way without issue.

Ideas?

Grand Master

redvamp128

Posted
Posted

So I came across a new problem today.

I thought it was related to Steam but I just tried another file and have the same issue.

Trying to install applications with .deb files and the Software Centre is giving me an error.

NOT FOUND

There isn?t a software package called ?file:? in your current software sources.

I dunno what I did, I already installed a few programs this way without issue.

Ideas?

I know sometimes when I get a 3rd part source- I have to right click on it and choose properties... then select the ... allow execution. Then the file will install. Only happened to me a few times.

also you could try after that the cmd line-

sudo apt-get update

Then check the file- also you could try:

sudo dpkg --configure -a

and

sudo apt-get install -f

Grand Master

Brandon H Supervisor

Posted
  • Supervisor
Posted

No, I have the main drive which was wiped and have Ubuntu installed, then I have 4 other drives with media on it.

there's your answer most likely. in linux every drive has a recycle bin. so the file in your recycle bin that you are seeing is most likely from one of the other four drives you have plugged in

Grand Master

+longgonebn Subscriber²

Posted
  • Author
  • Subscriber²
Posted

there's your answer most likely. in linux every drive has a recycle bin. so the file in your recycle bin that you are seeing is most likely from one of the other four drives you have plugged in

Thanks, I figured that was the case, a logical explanation, just wanted to hear someone say it.

Grand Master

Brandon H Supervisor

Posted
  • Supervisor
Posted

Thanks, I figured that was the case, a logical explanation, just wanted to hear someone say it.

yeah, windows does this too to some extent, with external hard-drives at least. but Unix does it with every storage device, whether it be hard-drive or flash-drive or SD card
Grand Master

+longgonebn Subscriber²

Posted
  • Author
  • Subscriber²
Posted

So I came across a new problem today.

I thought it was related to Steam but I just tried another file and have the same issue.

Trying to install applications with .deb files and the Software Centre is giving me an error.

NOT FOUND

There isn?t a software package called ?file:? in your current software sources.

I dunno what I did, I already installed a few programs this way without issue.

Ideas?

Just quoting the question since conversation happened after it.

Yes I have tried "allow execution" in the menu options without luck.

I think it's something I might have removed from my system, because installing from .deb was working before.

Rising Star

tim_s

Posted
Posted

there's your answer most likely. in linux every drive has a recycle bin. so the file in your recycle bin that you are seeing is most likely from one of the other four drives you have plugged in

Was "the file" that was added to the trash bin from the external media?

Grand Master

ViperAFK

Posted
Posted

So I came across a new problem today.

I thought it was related to Steam but I just tried another file and have the same issue.

Trying to install applications with .deb files and the Software Centre is giving me an error.

NOT FOUND

There isn?t a software package called ?file:? in your current software sources.

I dunno what I did, I already installed a few programs this way without issue.

Ideas?

Thats very strange, I've never seen that issue before, I'm always able to install .debs fine by double clicking them. Only thing I can find on that error is this bug report which says its been fixed already: https://bugs.launchp...ter/+bug/752376

You could try the commandline to install it: sudo dpkg -i packagename.deb

You can also try using the gdebi package installer as an alternative to software-center for installing debs with a gui: sudo apt-get install gdebi, and then right click and open the .deb with gdebi.

EDIT: from the comments in the bug report you can also try the command: software-center debname.deb to open the deb in the software center.

Grand Master

ViperAFK

Posted
Posted

Well the .deb does open Software Centre, it's what gives the error.

And those might work, but I'd rather try and find a solution because it makes no sense.

When you double click the .deb I assume its from the file manager? What file manager are you using? It should definitely work with nautilus, but if you are using a different file manager its possible that the file manager is feeding the software-center with some URI that it doesn't understand (I've seen pcmanfm do this kind of thing before I think), although according to that bug report the file: URI should be supported by software-center :/

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • PDF-XChange Editor 11.0.1.0

      By Copernic · Posted

      PDF-XChange Editor 11.0.1.0 by Razvan Serea PDF-XChange Editor is a comprehensive PDF editor that allows you to create, view, edit, annotate, and digitally sign PDF documents with ease. With advanced features like OCR, document security, and PDF optimization, PDF-XChange Editor is a powerful tool for both personal and professional use. Whether you need to edit text, images, or links, or add comments, stamps, or watermarks, PDF-XChange Editor provides all the necessary tools to make your PDFs look perfect. Additionally, it supports a wide range of file formats, including PDF, XPS, and DOCX, making it easy to convert and share your documents. PDF-XChange Editor key features: Edit text and images in PDF documents Add and remove pages from PDF files Annotate and markup PDFs with comments, highlights, and stamps Use OCR to convert scanned documents into searchable text Create and fill out PDF forms Sign and certify PDF documents digitally Add and edit hyperlinks within PDFs Extract text and images from PDF files Batch process multiple PDF files at once Customize the interface to your preferences Work with multiple documents in tabs Convert PDFs to other formats such as Word, Excel, and HTML Use advanced redaction tools to permanently remove sensitive information Add customizable headers and footers to PDFs Merge multiple PDF documents into a single file Split PDF documents into multiple files Add watermarks to PDF documents Use the measurement tools to calculate distances and areas in PDFs ....and much more PDF-XChange Editor 11.0.1.0 changelog: Fixed a crash in the new Open/Save dialog box when creating a new folder in an unavailable network path. (49552) Fixed a rare/infrequent crash on some dynamic XFA forms after changing their field values. [installer] Fixed an issue where shortcuts were lost during an upgrade from the previous version. [installer] Fixed an issue preventing migration of serial keys during updates from version 10. Fixed the issues with the shell context menu after installation of version 11. Fixed the issue with filtering comments. (49478) Fixed the issue that caused "Error [IO subsystem]: Invalid access mode." when converting PDFs to MS Office formats. Fixed an issue with the context menu position on some multi-monitor systems. (48467) Fixed an issue with handling complex custom file filters, displayed by JS, in the new Open/Save Files dialog box. (49486) Fixed several issues with the new 'Select Folder' dialog box. (49505) Fixed an issue with the new custom 'Open File' dialog box when using double-click to open it. (49498) Fixed an 'infinite' loop/proliferation in the 'Open Files' and 'Manage Places' dialog boxes. (49526) Fixed an issue with handling the mouse wheel inside the document "Find" box. (49539) Fixed an incorrect behaviour in the 'Go back (Alt+Left)' button in the new Open/Save Files dialog box. (49510) Fixed an issue with the shortcut keys (Alt+Left/Right) after navigating via breadcrumb paths in the new Open/Save Files dialog box. (49554) [installer] Fixed an issue with redrawing the progress text in the EXE installers. Fixed the issue where a mouse click outside of the polyline/polygon context menu during annotation creation would cancel the annotation. (49475) We switched back to using the system Open/Save/SelectFolder dialog box by default, instead of using the new one, because some popular features such as the QuickAccess/Recent items are missing in the new version. These will be added in a future release. Replaced the 'Extension' column in the new Open/Save File dialog box with a more user-friendly 'Type' column. Also fixed some issues when handling the 'Show file extension' option. (49497) Added the ability to authenticate local network shares in the new Open/Save Files dialog box. (49557) Improved the handling of dates after 01.01.2030 in XFA files - now such dates are stored properly when set via the dropdown widget. Flags NoZoom and NoRotate are now respected for only a limited subset of annotations. Download: PDF-XChange Editor (64-bit) | Portable ~300.0 MB (Shareware) Download: PDF-XChange Editor (32-bit) | Portable ~200.0 MB Download: PDF-XChange ARM64 | 276.0 MB Download: PDF-XChange Portable @PortableApps.com | 97.0 MB View: PDF-XChange Editor Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Save 31% on Samsung T7 Portable SSD

      By TheGodOfKratos · Posted

      Still 3x what it should cost. So, it seems the trick is to increase price by 6x so that a reduction in price back to 4x looks like a steal. "You savvy shoppers win again!" I'm glad I'm not in a desperate spot to actually even need this overpriced crap. Hopefully, it comes back down by the time for when (or if) I ever do.
    • Does your iPad support the latest iPadOS version? Here's the iPadOS 27 compatibility list

      By Noveed · Posted

      No M1? Wow!
    • Microsoft AI boss no longer believes that AI will replace human workers

      By Noveed · Posted

      Although AI is great and has it's use cases they likely have massively overhyped it and it has not delivered as per their expectations. I fully expect them to start saying the same things again when it does get to a certain level of intelligence!
    • Microsoft wants to end printer driver headaches with Windows Ready Print

      By Usama Jawad96 · Posted

      Microsoft wants to end printer driver headaches with Windows Ready Print by Usama Jawad A few days ago, Microsoft released Windows 11 Experimental build 26300.8553, bringing a ton of enhancements such as Start menu customization, search improvements, Taskbar polish, and other minor UI tweaks. Another relatively major enhancement snuck deep within the change log was related to upgrades to the Windows printing experience. Now, Microsoft has shared more details about these benefits. For starters, Microsoft has renamed its Modern Print Platform to Windows Ready Print. The company believes that this name highlights its shift in strategy, which now focuses on modernizing, securing, and streamlining the printing experience for Windows devices. Some of the upgrades present in Windows Ready Print have already been seeded to customers and partners. This includes ending support for third-party printer drivers via Windows Update and transitioning towards the Internet Printing Protocol (IPP) and the native Windows IPP printer driver. In line with these changes, new printer installations will default to Windows Ready Print on eligible devices starting from July 2026. However, Microsoft recognizes that not all environments will be able to migrate to this platform immediately, so it will allow users to choose between installing the printer via Windows Ready Print or the traditional OEM process. Users will be able to toggle this configuration through Settings > Bluetooth & Devices > Printers & Scanners > Printer preferences. This control applies only to new printer installations, and its functionality can also be modified via Group Policy as follows: Launch Group Policy Editor Navigate to Local Computer Policy -> Administrative Templates -> Printers Find and select 'Configure Windows Ready Print driver ranking' -> double click to open it Select 'Enabled' (if you wish to enable Windows Ready Print driver selection) or 'Disabled' (if you wish to explicitly disable Windows Ready Print driver selection). Select Apply Select OK Similarly, if you set up Windows protected print mode through the same setting in Windows 11, it will also default to using Windows Ready Print exclusively. Microsoft hopes that these improvements will help eradicate dependency on OEM-specific driver installation processes and simplify printer installations. We'll likely find out more about other tangible benefits in the coming months.

  • Recent Achievements

    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      PsYcHoKiLLa
      231
    3. 3
      +Edouard
      138
    4. 4
      ATLien_0
      87
    5. 5
      Steven P.
      81
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!