Recommended Posts

It's not working.

UUID=12498dda-899a-4e48-9d6e-a5372340f3dd /media/Movies ext4 uid=1000,gid=1000,umask=0022,sync,auto,nosuid,rw,nouser 0 0

This was taken from an example I found..

uid=1000,gid=1000,umask=0022 do I need this...I see this no where on the archwiki page?

Also, I am user bman....should i be using nouser, or should I put user or users

** I ended up putting this

UUID=12498dda-899a-4e48-9d6e-a5372340f3dd /media/Movies ext4 sync,auto,nosuid,rw,nouser 0 0

And all mounted without issue.

you don't need users because you want it to be open. UID=1000 means that it will be accessible for your user by default (unless overriding policies are set on files) and gid=1000 means that your users group will have access to. So it's more of a permissions thing. You could try and remove those settings, but you may run into permissions (mounted as root) issues.

What is not working?

As I stated above.

With those details it would give error, I removed it and had only

UUID=12498dda-899a-4e48-9d6e-a5372340f3dd /media/Movies ext4 sync,auto,nosuid,rw,nouser 0 0 

And everything mounted without issue, my programs that use it are still working. So it's working.

Thanks guys.

Wikipedia tells me that uid and gid and unmask are for FAT file systems only, which probably explains why they don't work.

If you want to simplify things, try simply using "default" option only (instead of specifying all the options like sync, auto, nosuid, etc manually), and see if that works. Then if it doesn't do what you want, adjust as necessary.

  • Like 1

So I got a chance to reboot since doing all that, and everything worked fine, in terms of mounting.

But now, copying or moving files to these drives are VERY slow. A 1GB file would have taken 1 min or less (usually less), it's now like 15 minutes or something, ridiculous!

I am assuming it's the auto mounting that did something, but what could have caused that?

My guess is because you specified "sync" writes, which you don't need for an internal drive. If necessary, you can further boost performance if you add "noatime" as an option, although it won't write "last accessed" times anymore. :)

Yea see I didn't know that. That's what you get for copying stuff from the internet lol

And I was just reading up on noatime, sounds good, but what do you mean by "last accessed"? What exactly will change when using my system?

Also, can I keep defaults, and just add noatime beside it?

Yes, you can just use "defaults,noatime" without issue. Basically, every time you read or write a file, a timestamp in the file inode will be updated. This means that you can view the time that the file was last accessed if necessary. The obvious downside of this is that every read is also a write, and this has a moderate impact on performance.

'noatime' will prevent these access timestamps from being written, which reduces I/O usage, which is good for performance. This is of course at the cost of the last-access time being updated, which can cause issues for some older email clients and such, which rely on the difference between last accessed time and last modified time to determine if an email is unread.

Looking into it though, Ubuntu has made "relatime" a default option for ext file systems since around 2010 anyway (see here), so you'd probably see no benefit from using noatime anyway. The defaults should be just fine ;)

An explanation of noatime vs relatime can be found here: http://linux.koolsolutions.com/2009/01/30/installing-linux-on-usb-part-4-noatime-and-relatime-mount-options/

I don't think I have asked this hear, and haven't found a good solution anywhere else.

I have the xscreensaver setup and works great. The only issue is that it comes on even with full screen applications running.

Alright, I use VLC that disables it while its open, great,...uh no. The problem with that is even if I have that VLC window minimized or in the small size (not full screen) the screensaver is still disabled, stupid.

Also, that doesn't work for flash sites like you tube.

Any ideas?

  On 11/02/2013 at 00:14, bman said:

I don't think I have asked this hear, and haven't found a good solution anywhere else.

I have the xscreensaver setup and works great. The only issue is that it comes on even with full screen applications running.

Alright, I use VLC that disables it while its open, great,...uh no. The problem with that is even if I have that VLC window minimized or in the small size (not full screen) the screensaver is still disabled, stupid.

Also, that doesn't work for flash sites like you tube.

Any ideas?

The same happens on windows with VLC. I think it is a setting as it disables my windows screenwaver

Yes, the setting I want enabled because it stops the screensaver from happening when watching videos, but it's like it's not smart enough to know that if I have it minimized I want the screensaver to work.

  On 11/02/2013 at 01:06, bman said:

Yes, the setting I want enabled because it stops the screensaver from happening when watching videos, but it's like it's not smart enough to know that if I have it minimized I want the screensaver to work.

I get that on Windows. If I have VLC Open the screensaver doesn't work. Even minimized or without a video loaded.

A new problem, well not new but haven't posted about it.

This has happened before but let it go because it's only once in a blue moon.

Sometimes randomly the VLC Icon on Unity stops working, at first the minimize and restore feature of the button stop working, then eventually there is no icon at all.

I have to reboot to get it to work again. Sometimes it does come back and start working again, but most of the time no.

Ideas, can't seem to find any information about it.

I guess as the rest of the internet, no one here knows either. Alright ignore that for now.

I have Chrome installed and is my main program, I use it for everything. Does anyone know how to properly restart chrome?

When I close Chrome, it's still running in the background, if I look at the System Monitor, its still there. If I try to close all 20 processes it can sometimes cause issues with accounts and stuff, so I don't want to do that, besides it taking long.

I want to be able to restart chrome because after awhile, it uses a lot of resources and kills my fairly old system. Instead of restarting all the time, I'd rather restart chrome.

In Windows, if you exited it, it seemed to close fully, Ubuntu it does not.

Ideas?

  On 15/02/2013 at 02:26, bman said:

I guess as the rest of the internet, no one here knows either. Alright ignore that for now.

I have Chrome installed and is my main program, I use it for everything. Does anyone know how to properly restart chrome?

When I close Chrome, it's still running in the background, if I look at the System Monitor, its still there. If I try to close all 20 processes it can sometimes cause issues with accounts and stuff, so I don't want to do that, besides it taking long.

I want to be able to restart chrome because after awhile, it uses a lot of resources and kills my fairly old system. Instead of restarting all the time, I'd rather restart chrome.

In Windows, if you exited it, it seemed to close fully, Ubuntu it does not.

Ideas?

by default chrome allows extensions to run in the background (even while closed) this could be what you're experiencing when there are still chrome processes running after you close the browser

you can disable this option in settings at the very bottom of the advanced section

No, I do use that feature, I have a few running in the background for a reason.

But, on Windows it had a Chrome Icon beside the clock, if you right click that and exit, Chrome fully closes. Ubuntu does not have that ability.

This topic is now closed to further replies.
  • Posts

    • The DS925+ which is this years model with 2.5G networking is only marginally more expensive. About £25 more on Amazon UK. Not sure on the certified disks thing though, I guess it depends if the disks they certified are more expensive than the others or not. I use Seagate IronWolfs personally. Are they on the list? I agree with Steven. Synology DSM is miles ahead of the competition, I wouldn't go elsewhere now. The price is justified.
    • Google Cloud announces new Gemini-powered tools to 'increase efficiency' for partners by David Uzondu Google just announced a couple of new AI tools for its Partner Network Hub on Google Cloud, designed to take care of some of the most boring admin work and make things a bit easier for the companies it works with. Putting together a formal Statement of Work can be a tedious process, where every single detail needs to be perfectly aligned with Google Cloud's requirements. The company's new SOW Analyzer, powered by Gemini, tackles this directly. Partners can upload their draft document, and the AI will immediately point out problems like missing clauses or technical goals that are not measurable, even providing examples of how to fix them. In addition to the analyzer, there is a new Bot-Assisted Live Chat. This is an AI agent built into the partner portal that provides 24/7 help with things like onboarding, billing questions, and incentive claims. If the AI cannot solve your problem with billing or rebate claims, it can hand you off to a human agent without making you explain the entire issue from scratch. These two tools are joined by AI-powered updates to the existing Earnings Hub, which is designed to help partners find new growth opportunities by using predictive data to show what services are in demand: The SOW Analyzer and Earnings Hub are available right now for partners in the hub. The Bot-Assisted Live Chat is currently rolling out and is expected to be fully available to all users by next month.
    • Not sure I agree with your particular interpretation of this. An ESU key is still required per device that you have to enter into the device in order to activate ESU. These aren't being given out for free. The linked Microsoft article still states: "If you have paid to enroll your remaining Windows 10 systems in the ESU program..." which seems to confirm this.
    • I swear, whoever is handling the Gundam IP for video games should be fired. How can you go from the gems that were releasing in PS1, PS2 and PS3, to the utter disaster that's today, from the VR game just to be on the hype bandwagon and all the focus on SD. This will probably be studied as one of the worst ways companies mishandle an IP.
  • Recent Achievements

    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      535
    2. 2
      ATLien_0
      207
    3. 3
      +FloatingFatMan
      172
    4. 4
      Michael Scrip
      148
    5. 5
      Steven P.
      119
  • Tell a friend

    Love Neowin? Tell a friend!