Recommended Posts

Is the Corsair k90 good for "gaming" (all I play is Wolfenstein: enemy territory) and typing? I'd like the best of both worlds type of keyboard and needs to be as quiet as possible

It would be far more than good for that game :D (typing is also nice, there is a review here about this keyboard too)

I bought an original IBM Model M recently, and am using it now. Whilst I agree it's a brilliant keyboard and is excellent for typing, I wouldn't recommend it for gaming. If I'm gaming I use my Microsoft keyboard.

I'd somewhat agree for multiplayer shooters for all other types of games I've never had any problem with it...

Do these keyboards have individual switches for each key rather than a printed membrane inside?

Yes, and you can take out each key cap to replace or clean out with ease.

cooler_master_storm_quickfire_keyboard_switches_news.jpg

I've got Filco ninja majestouch-2 10keyless with Brown Switches, best keyboard I've ever owned. Along with brown switches I prefer reds as well.

Black switches are usually recommended for FPS players, however I found that Black switches feels like membrane keyboards, did not like it.

Been reading about the Corsair K90 apprantly the keys getting "stuck" seems to be a common fault, where it'll just keep doing any random letter rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr, anyone else has this?

This is the problem reading reviews, I get put off far too easily.

But it does look supersexy and only ?89, bargain

Been reading about the Corsair K90 apprantly the keys getting "stuck" seems to be a common fault, where it'll just keep doing any random letter rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr, anyone else has this?

This is the problem reading reviews, I get put off far too easily.

But it does look supersexy and only ?89, bargain

First firmware versions had some sort of problem that indeed would cause a key to be stuck, but honestly speaking, I updated the firmware on my keyboard since day 1 and haven't felt such behavior.

But it does look supersexy and only ?89, bargain

Ebuyer by any chance?

I just had another go on my friends K90 and it felt good, so I've come home, looked for the cheapest which happened to be Ebuyer and ordered it.

Thanks all for your suggestions and what not. Keep discussing as I'm sure there are others like me, looking for a good mechanical keyboard!

If you got the dough, Filco branded KBs are generally regarded as the best mechanical keyboards. CM Storm Quickfires (not the Pro's) are generally made from the same OEM, though some specific models might not be.

Ducky KBs might be hard to find, but are also really well made for their price.

On a budget, Rosewill mechanical KBs are really solid.

I've got a Thermaltake Meka G1, which is slightly older than all the more current mechanical keyboards, but I still don't have an issue with it and its Cherry Blacks. They are supposedly made by the Filco oem's too. =)

To add to this, I've found Ducky keyboards at my local Microcenter, and CM Storm Quickfires are Filcos, and you can find some on shelves now that don't have 25 stupid little CM logos on them.

The Filco ninjas are pretty nice though. I'm going to pick up a mechanical keyboard when I get some free cash, I it's either going to be a Ninja, a WASD V2, or a Noppoo choc mini.

I wrote one of the K90 reviews on here.

I'm still using the keyboard and I do like it, but the keys getting stuck thing is true, albeit rarely occurring; Perhaps twice a month at worst >.<

Simply striking the key again fixes it. It's a great keyboard, but that little annoyance is present.

EDIT::

For the people interested: https://www.neowin.net/forum/topic/1076015-corsair-vengeance-k90-performance-mechanical-gaming-keyboard/

Comments are worth a read also.

Got a Corsair K60 late last month and it's a fun keyboard. Additional USB port is helpful for charging, the rolling volume wheel is intuitive, and the keys aren't too loud. They're about the same as the Microsoft Internet Keyboard, sound wise. Plus the removable keys and the design of the keyboard itself - open space beneath the keys - makes it dead simple to brush away dust, hair, and crumbs.

The lack of a palm rest is a bit of a pain. I've found that my right hand lifts itself off the table when typing quickly. I'm waiting on delivery of a 3M palm rest to remedy that (WR309LE).

As far as I know, Logi only has one mechanical KB (G710+) and it was only just released.

Thanks, and man does that G710+ look good.

Another side question, is mechanical KBs a new thing, or old tech becoming popular again?

Logitech uses red switches too, and has also a volume knob like de k90 (same form) has less macro keys but the whole keyboard is mechanical, I think it should make even less noise because it has not aluminium cover as the k90 (that was a very tempting keyboard before my k90 indeed) but it costs a bit more.

Another side question, is mechanical KBs a new thing, or old tech becoming popular again?

It's an old technology, from before the rise of the (much cheaper) membrane keyboards.

I've got a Qpad MK-80 and it is by far the best keyboard I've ever had the pleasure of owning, mechanical or otherwise. It uses the blue switches, which is perfect for me.

Thanks, and man does that G710+ look good.

Another side question, is mechanical KBs a new thing, or old tech becoming popular again?

I like the G710+, too. I am still thinking about a mech KB, and the G710+ is in the running.

Mech KBs aren't new. Mech KBs, as far as I understand, were the first ones, then membrane/rubber dome keyboards came about and because they are easier and cheaper to produce they became more common. Gamers and typists like mech KBs because of the responsiveness of the keys.

Then everyone argues about which coloured keys are better. Blues, blacks, browns, reds, etc.

This topic is now closed to further replies.
  • Posts

    • No news articles about the Arch Linux repo being majorly infected with malware?!?
    • Waymo recalls self-driving software after cars enter closed freeway work zones by Paul Hill Waymo, the self-driving car maker owned by Alphabet – the parent company of Google –, has recalled some of its fifth-generation Automated Driving Systems (ADS). It did so after some of its cars drove through closed construction zones. According to the National Highway Traffic Safety Administration (NHTSA), the affected vehicles were capable of driving through a closed freeway construction zone and continuing to drive at speed. The listing on the NHTSA website says that Waymo is currently developing a solution to fix this issue, but in the meantime, freeway driving is being restricted. Waymo will update its ADS software so that vehicles can detect when they can avoid entering construction zones. According to the Safety Recall Report, on April 20, 2026, Waymo’s Field Safety Committee began meetings reviewing an event from April 11, 2026, and five events from April 19, 2026, where Waymo’s autonomous vehicles didn’t recognize and drove past ramp closure signs into the pre-planned freeway construction zones. This took place in Phoenix, Arizona. Separately, on May 18, 2026, seven Waymo vehicles entered freeway lanes with active construction in the San Francisco Bay Area by driving between cones that were placed to show the lane was closed. On the back of both of these events, Waymo restricted freeway driving until it could address the issue. In June, Waymo’s Safety Board reviewed the issue and additional information related to ADS performances around construction zones; then, as a result, it decided to conduct a recall. This development is not good for Waymo as it adds to a growing list of technical hiccups its cars have experienced. Ultimately, it will lead to more scrutiny from lawmakers around the world who will be more cautious about letting autonomous vehicles on their roads without tighter regulation. For readers in areas where Waymo operates, does this news make you more wary about stepping into one of these vehicles?
    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
    • And with SO much better perf than the laggy mess that is Files.
  • Recent Achievements

    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
    • First Post
      BizSAR earned a badge
      First Post
    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      598
    2. 2
      +Edouard
      190
    3. 3
      PsYcHoKiLLa
      79
    4. 4
      Michael Scrip
      76
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!