What do you guys think about this?


Recommended Posts

I want a new build but I don't feel like spending a lot. I was looking at performance and found a processor and I know that my genius friends here at Neowin would be the best people to ask.

Why the hell is this processor so cheap? It's extremely powerful. Is it because of the heat?

http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=4904561&Sku=A79-8350&csid=ITD&recordsPerPage=10&body=REVIEWS#CustomerReviewsBlock

Thanks folks!

Link to comment
https://www.neowin.net/forum/topic/1133866-what-do-you-guys-think-about-this/
Share on other sites

Specs look good, what am I missing?

AMD has lower IPC than Intel meaning that performance is lower in applications and games that don't handle cores properly. It should be better than an equivalent i5 at the same price for general usage and multitasking. Another low point is power usage which is higher than i5s.

Personally I'd go with the 8320 and overclock that. You can can get AMD boards with the same features (without PCIE3) as Intel ones at lower prices. Their current socket AM3+ should support the next gen Steamroller (coming ~2014), while the 1155 Intel socket is a dead end. Alternatively, you can wait for Intel's Haswell which should hit on their new socket around June, but don't expect it to be budget friendly.

  • Like 1

AMD has lower IPC than Intel meaning that performance is lower in applications and games that don't handle cores properly. It should be better than an equivalent i5 at the same price for general usage and multitasking. Another low point is power usage which is higher than i5s.

Personally I'd go with the 8320 and overclock that. You can can get AMD boards with the same features (without PCIE3) as Intel ones at lower prices. Their current socket AM3+ should support the next gen Steamroller (coming ~2014), while the 1155 Intel socket is a dead end. Alternatively, you can wait for Intel's Haswell which should hit on their new socket around June, but don't expect it to be budget friendly.

Thanks for the amazingly detailed response. I'm not stuck to one brand I just want something decent at a fair price. Not into much gaming anymore so I would barely do that. You seem to think Intel is a better choice and I have been eyeing the i5 so...

It's an awesome deal if you typically deal with several heavy duty applications simultaneously. An equivalent Intel chip in that area would cost a lot more. It's not so good for single application loads, though, which is more typical usage. So gaming would be an example where you might want to choose a different product.

  • Like 1

It's an awesome deal if you typically deal with several heavy duty applications simultaneously. An equivalent Intel chip in that area would cost a lot more. It's not so good for single application loads, though, which is more typical usage. So gaming would be an example where you might want to choose a different product.

not a lot more http://www.microcenter.com/product/388575/Core_i7_3770K_35GHz_LGA_1155_Processor

Anybody that tells you AMDs aren't powerful is an Intel fanboy. AMDs are powerful and they are just as good and efficient as Intel's more expensive counterpart. I was an Intel-Only user and I decided to give AMD a chance this time around and I can't complain. The FX 8150 8 Core CPU I got its a monster and it handles everything I throw at it with ease and without hesitation.

I used to be one of those that believed AMD was crap. I was wrong.

  • Like 4

OP maybe you can say what config your current PC has and name what you typically do with it so we can get a better idea of where you're coming from and what you need.

Also, I don't believe Intel is better, it all depends on a lot of factors really. Even if AMD is far from the crown, it's quite competitive in price/performance.

  • Like 1

OP maybe you can say what config your current PC has and name what you typically do with it so we can get a better idea of where you're coming from and what you need.

Also, I don't believe Intel is better, it all depends on a lot of factors really. Even if AMD is far from the crown, it's quite competitive in price/performance.

Boy am I glad this isn't an e-penis measuring contest...

E6600 OC'd 3.24Ghz

2GB OCZ RAM

ATI X1950XTX

Gigabyte Mobo

^^I used to game way back but after I bought my PS3 I stopped with PC games. I ONLY use my PC for DreamWeaver, some Photoshop and maybe some video editing in the near future. Honestly, the ONLY way I'd game is if I get a free game from a friend :shiftyninja: or it's just something I have to have. A friend of mine gave me a download code for AC3 because he bought 2 video cards and got them included. That would be the only game I played.

So in short, web editing, photo editing and movie editing down the line. Oh and streaming HD movies to my TV.

Who says 1175 is a dead end?

Anyways, I feel that AMD CPU is good at that price point. Anything over that and I wouldn't bother as you can go with the 3570k which is generally the better buy. But really, will you notice a difference? Likely not.If you want to keep it under 200 and will be doing a lot of multitasking, editing or any heavy duty stuff the 8350 will be just fine.

  • Like 1

snip

The FX is damn good for that. I would go for the 8320 and overlock to 8350 level or more as needed because I'm a penny pincher. :shifty:

Who says 1175 is a dead end?

Intel does, the 1155 will be replaced by the 1150 for Haswell and Broadwell.

  • Like 1

The FX is damn good for that. I would go for the 8320 and overlock to 8350 level or more as needed because I'm a penny pincher. :shifty:

Intel does, the 1155 will be replaced by the 1150 for Haswell and Broadwell.

Right but saying it's a dead end somewhat implies it's also a poor buy.

Soooooo would any of you awesome folks be willing to post a good video card, mobo combo for the FX 8320? :D

Just remember how much I love and appreciate you all!

Budget? Can't go wrong with a GTX 660 but if you're on a budget and want decent performance the Radeon 7850 is still a good buy.

This is a nice board but it is 189.99 : http://www.newegg.co...N82E16813131736

ASRock 990FX Extreme9 - 159.99

http://www.newegg.com/Product/Product.aspx?Item=N82E16813157358

GIGABYTE GA-990FXA-UD3 - 149.99

http://www.newegg.com/Product/Product.aspx?Item=N82E16813128514

  • Like 2

Budget? Can't go wrong with a GTX 660 but if you're on a budget and want decent performance the Radeon 7850 is still a good buy.

This is a nice board but it is 189.99 : http://www.newegg.co...N82E16813131736

ASRock 990FX Extreme9 - 159.99

http://www.newegg.co...N82E16813157358

GIGABYTE GA-990FXA-UD3 - 149.99

http://www.newegg.co...N82E16813128514

Don't really have a budget. I want to spend as least as possible without making the computer look and feel like a car that has a Honda Accord body but a Ferrari engine. If my CPU is amazing but the components are trash, that would suck. So just suggestions I guess and your suggestions look great! I appreciate you taking the time out.

Edit: I want to spend as least as possible but if something makes sense and it costs $50 more than what I want to spend I'm not gonna cry.

I know that 90% of people prefer intel. I'm one of the 10% who prefers AMD. Why? The Dollar Bill. I'm not rich, so I get the best bang for my buck and go AMD. If I actually had the cash, I would still probably stick with AMD. Although, lately, I've been thinkin maybe the grass is greener on the other side.

  • Like 2

That's not a bad CPU. Unless you want a CPU that will perform certain functions faster (usually only seconds faster), then go with an i5 or i7. And if gaming, AMD CPUs and Intel CPUs are about equal in most games + or - a few frames here or there. Only thing I don't like about these AMD FX chips, is that their single threaded performance is worse then the previous generation of AMD Phenom II chips, but they make up for it with higher clock speeds.

Right but saying it's a dead end somewhat implies it's also a poor buy.

It is a poor buy if you intend to upgrade to Haswell and beyond because you have to get a new motherboard. If you're staying with 1155 until GPUs can take advantage of PCIe 3 and DDR4 becomes available and affordable then this is not an issue obviously.

Soooooo would any of you awesome folks be willing to post a good video card, mobo combo for the FX 8320? :D

Just remember how much I love and appreciate you all!

Like DM said, the 7850 is a pretty good budget card that handles any modern game. Might be worth getting the 2GB version for video editing, I'm not sure. Someone with more experience with this might help here. What resolution does your monitor have btw?

As for mobo I'd go with something with the 970 chipset like MSI 970A-G46 (all manufactures have boards with equivalent specs if MSI is not your choice). Although that board comes with a 8GB memory module, it is a bit slow and you should sell it if you get it. Go with a 4GBx2 DDR3 1600Mhz CL9 kit and 1.5v or lower. I found this funny thing while browsing Newegg.

It is a poor buy if you intend to upgrade to Haswell and beyond because you have to get a new motherboard. If you're staying with 1155 until GPUs can take advantage of PCIe 3 and DDR4 becomes available and affordable then this is not an issue obviously.

Like DM said, the 7850 is a pretty good budget card that handles any modern game. Might be worth getting the 2GB version for video editing, I'm not sure. Someone with more experience with this might help here. What resolution does your monitor have btw?

As for mobo I'd go with something with the 970 chipset like MSI 970A-G46 (all manufactures have boards with equivalent specs if MSI is not your choice). Although that board comes with a 8GB memory module, it is a bit slow and you should sell it if you get it. Go with a 4GBx2 DDR3 1600Mhz CL9 kit and 1.5v or lower. I found this funny thing while browsing Newegg.

My monitor has a resolution of 1920x1080. It's a Viewsonic LED. I've bookmarked everything youve suggested and I should be making the purchase today or tomorrow.

My monitor has a resolution of 1920x1080. It's a Viewsonic LED. I've bookmarked everything youve suggested and I should be making the purchase today or tomorrow.

Haha, tried to narrow down a specific model for the 7850 from Newegg, but I can't make up my mind. You have the cheap option with the 1GB HIS or XFX cards, then there's the twin cooler 2GB cards, but they get awfully close to the 7870. And you guys also have the whole rebate thing.

Anyway, I guess you have more shops that you're looking at which might change the whole GPU situation. Whatever the case, try and find comprehensive reviews of the cards if you can before deciding on one. That being said, best of luck.

  • Like 1
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!