• 0

[PHP] Pass POST data from one page to another


Question

Hi all,

I want to PASS post data from a form to a php page and then to another php page.

At the moment it does this.

1. POST to External PHP page.

2. External PHP page displays SUCCESS or ERROR.

I don't want the user to see this.

Is there a way to implement it like so:

1. POST to local PHP page

2. POST from local PHP to external PHP.

3. Load PHP response into string.

4. If string contains word ERROR then display a message on local php page.

5. Otherwise Display "submission successful"

7 answers to this question

Recommended Posts

  • 0

Hi Axel, it sounds to me like you want an Ajax call; have you considered this? It would at least cover the requirement of letting you post data to the external PHP page and retrieving back a result without moving your user off the page.

  • 0

Yo again!

I did this by doing the following. Please note I don't know how security-risky is this. But here it goes.


<?php
session_start();

$_SESSION['post_data'] = $_POST;

?>
[/CODE]

Now, on the other page

[CODE]
<?php
session_start();
$_SESSION['post_data']/// Use this as the POST variable.
?>
[/CODE]

If you want to be sure that there data is cleared then do it this way:

[CODE]
<?php
session_start();
$_SESSION['post_data']/// Use this as the POST variable.

//After finishing the code:
unset($_SESSION['post_data']);
?>
[/CODE]

Hope this helps :)

Anybody who thinks this presents a security risk please let me know, because I'm using this technique right now. Although I'm not using a sensitive information.

  • 0

I'll clarify a little bit. I'm sending the form data to https://www.formstac...forms/index.php

I don't think the Formstack API supports JSON.

I can quite easily get a webpage into a variable using php:

  $url = "https://www.formstack.com/forms/index.php"
  function get_data($url) {
  $ch = curl_init();
  $timeout = 5;
  curl_setopt($ch, CURLOPT_URL, $url);
  curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
  curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, $timeout);
  $data = curl_exec($ch);
  curl_close($ch);
  return $data;
}

Now is it possible to somehow forward the $_POST data in the curl request so that I get the relevant data?

I hope that makes sense.

Edit: Hi Jose_49! I don't thing that technique will work on the basis that I don't have any access to the code on the https://www.formstack.com/forms/index.php page so unfortunately I can't alter it. What do you make of my suggestion above?

  • 0

This is interesting:

http://superuser.com/questions/149329/what-is-the-curl-command-line-syntax-to-do-a-post-request

curl --data "param1=value1&amp;param2=value2" http://example.com/resource.cgi

No idea how to use this though.

  • 0
  On 02/02/2013 at 17:42, Jose_49 said:

I did this by doing the following.

<snip>

You've misunderstood, one of the two pages the OP wants to send the data to is on another web service!

  On 02/02/2013 at 17:43, Axel said:

I'll clarify a little bit. I'm sending the form data to https://www.formstac...forms/index.php

I don't think the Formstack API supports JSON.

One way you could perhaps find out: grab the POSTman addon for Google Chrome and use it to send a request. Set the method to POST, place your json encoded string in the body (RAW mode), and set the 'Content-Type' header to 'application/json', then see what you get back.

  On 02/02/2013 at 17:43, Axel said:

I can quite easily get a webpage into a variable using php:

  $url = "https://www.formstack.com/forms/index.php"
  function get_data($url) {
  $ch = curl_init();
  $timeout = 5;
  curl_setopt($ch, CURLOPT_URL, $url);
  curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
  curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, $timeout);
  $data = curl_exec($ch);
  curl_close($ch);
  return $data;
}

Now is it possible to somehow forward the $_POST data in the curl request so that I get the relevant data?

This is the method I would suggest you use to do it, submitting to your own PHP script, then with that submitting to the other web service.

Assuming the web service accepts JSON encoded data, you could use the following code:

$data = json_encode($_POST);

$ch = curl_init('https://www.formstack.com/forms/index.php');
curl_setopt($ch, CURLOPT_CUSTOMREQUEST, "POST");
curl_setopt($ch, CURLOPT_POSTFIELDS, $data);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, array(
	'Content-Type: application/json'
);

$result = curl_exec($ch);

If the web service does not accept JSON:

The default encoding for form data in a POST request is application/x-www-form-urlencoded. I just made a little test script, and it does not seem that PHP keeps a copy of it in this format in a server variable. The application/x-www-form-urlencoded format is described here: http://www.w3.org/TR...tml#h-17.13.4.1. It's essentially the same as query string format. e.g. forename=foo&surname=bar, and certain characters being encoded.

Thankfully though, there is no need to translate the $_POST array into an application/x-www-form-urlencoded string, you can simply give CURLOPT_POSTFIELDS an array, and it'll sort it out for you!

$ch = curl_init('https://www.formstack.com/forms/index.php');
curl_setopt($ch, CURLOPT_CUSTOMREQUEST, "POST");
curl_setopt($ch, CURLOPT_POSTFIELDS, $_POST);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);

$result = curl_exec($ch);

  On 02/02/2013 at 18:20, Axel said:

This is interesting:

http://superuser.com...-a-post-request

curl --data "param1=value1&amp;param2=value2" http://example.com/resource.cgi

No idea how to use this though.

Obviously this is command line usage (I'm sure you knew that, just making sure). Note that the data is in application/x-www-form-urlencoded form, as mentioned above! You could probably pass this as a string to php's exec() function, but that could very likely be extremely insecure, so I would strongly discourage it!

  • Like 2
  • 0
  On 02/02/2013 at 19:23, theblazingangel said:

Thankfully though, there is no need to translate the $_POST array into an application/x-www-form-urlencoded string, you can simply give CURLOPT_POSTFIELDS an array, and it'll sort it out for you!

$ch = curl_init('https://www.formstack.com/forms/index.php');
curl_setopt($ch, CURLOPT_CUSTOMREQUEST, "POST");
curl_setopt($ch, CURLOPT_POSTFIELDS, $_POST);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);

$result = curl_exec($ch);

YOU SIR ARE AN ACTUAL GOD - THANK YOU SO MUCH!!!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No operating system works well with programs that modify its interface. There will always be bugs, whether it's MacOS or Linux. Windows too, you'll only suffer from bugs using this crap software.
    • KDE brings UI improvements, bug fixes and more to Plasma 6.4 as stable release draws near by David Uzondu With less than a month to the release of Plasma 6.4, the KDE dev team has shared what it has been working on in the latest issue of its weekly roundup. The update shows a heavy focus on user interface polish and a whole slew of bug fixes as the June 17 release date gets closer. The team has pushed a number of UI refinements for the upcoming version. On the System Settings page for Wi-Fi, the network list can now be fully navigated with a keyboard. KDE also disabled the ability to drag and drop displays on top of one another in the monitor settings. This was done because it could create unsupported arrangements that triggered a cascade of strange bugs throughout the system. Waking up a sleeping computer by pressing the power button no longer causes the bizarre logout screen to appear after you unlock it, which is a relief. Alignment issues in the settings page for the Digital Clock widget were also resolved. The list of bug fixes for 6.4 is extensive. The development team has fixed the most common crash affecting the System Monitor and squashed another one related to a divide-by-zero error. For users with multiple monitors, a long-awaited fix has landed that prevents windows from disappearing when the screen they are on gets disconnected. Even the humble Sticky Notes widget received attention; it will no longer freeze the Plasma shell if you place it on a very thick panel. Discover, the software center, also had a bug patched that caused it to crash if closed too quickly after launch. Here's the full list of improvements: Putting a Sticky Note widget on a very thick panel can no longer cause Plasma to freeze; now, you can use a thick panel with a sticky note on it as a notes sidebar. Fixed the most common System Monitor crash. Fixed another crash in System Monitor, this time a divide-by-zero. Fixed a case where xdg-desktop-portal-kde could crash after you choose a video source to start streaming. Fixed a bug that caused Discover to crash if you close it immediately after it launched. Fixed multiple subtle bugs with the screen chooser widget and OSD that caused it to do the wrong thing on rotated screens or when mirroring screens. Fixed a bug that caused the System Settings’ search field not to be focused properly when pressing Ctrl+F while any UI elements in a settings page already had focus. Fixed the root cause of multiple issues involving windows disappearing when you disconnect the screen they’re on. Clicking a button on a desktop widget that opens a menu no longer inappropriately makes the widget enter Widget Edit Mode. Files with a # or ? character in their name or full path are no longer unexpectedly missing from the history lists in Kicker/Kickoff/etc launchers. Fixed a bug that caused the screen chooser window to sometimes not appear as expected when OBS was launched. Fixed a bug that caused tiled windows on a multi-screen setup to lose their tiling settings when the system went to sleep and woke up again. The "Move window to [activity]" feature now works properly when invoked from the Task Manager widget. Fixed a bug in the Kicker Application Menu that caused keyboard navigation not to work if the popup opened with an item under the pointer. In the Overview effect’s grid view, dragging windows tiled on one virtual desktop over to a different virtual desktop now keeps them tiled as expected. The focus may be on the imminent 6.4 release, but work on what comes next never really stops. Looking ahead, development on Plasma 6.5 is already well underway. Just last week, the KDE team brought several performance improvements to Plasma 6.5.0. This week, the team fixed a nagging bug that sometimes caused the Networks widget to think a hotspot was still enabled after disconnecting from Wi-Fi. On the features side, the System Settings' Fonts page now prevents you from breaking your system entirely by setting fonts below 4pt. In addition to that, switching time spans in the Info Center’s energy page now features smooth graph animations. Performance-wise, kwriteconfig should also be faster, allowing changes you made to the keyboard layout using the tool to reflect immediately.
    • Display Driver Uninstaller (DDU) 18.1.1.4 by Razvan Serea Display Driver Uninstaller (DDU) is a utility for completely removing AMD/NVIDIA/INTEL graphics drivers and related packages from your system, attempting to eliminate all leftovers (including registry entries, folders and files, driver store). Though AMD/NVIDIA/INTEL drivers can usually be removed via the Windows Control Panel, this uninstaller tool was created for situations where standard uninstall fails, or when you need to fully remove NVIDIA or ATI graphics card drivers. After using this driver cleaner, your system will behave as though it’s the first time you’re installing a new driver—similar to a fresh Windows installation. As with all such tools, we recommend creating a restore point beforehand, allowing you to undo changes if issues arise. If you're having trouble installing an older or newer driver, try it—there are reports that it resolves such problems. Recommended usage: The tool can be used in Normal mode but for absolute stability when using DDU, Safemode is always the best. Make a backup or a system restore (but it should normally be pretty safe). It is best to exclude the DDU folder completely from any security software to avoid issues. You do NOT need to uninstall the driver prior using DDU. Requirements: .NET Framework 4.8 Compatible with Windows 7, 8, 8.1, 10, and 11 (32-bit or 64-bit) Note: Using on Insider Preview builds is at your own risk. Display Driver Uninstaller (DDU) 18.1.1.4 changelog: Intel: Added NPU presence detection before removing shared DLL files (these were previously left to prevent potential NPU-related issues). Intel: Added optional NPU removal Improved "Extension" driver removal process. Updated several translations. Download: Display Driver Uninstaller 18.1.1.4 | 1.7 MB (Freeware) Download: DDU Portable | 1.2 MB Links: Display Driver Uninstaller Home Page | Screenshot | Forum Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • That is what I also think to a point. How is 26 necessarily different than just another iteration like 18, 19, 20, etc? At first I think it would be better for Apple to use 2026, 2027, and then maybe truncate it to just 28, 29, and so on. Granted, I also think it makes more sense to use the year when it was released (2025 or 25), not 26/2026. Maybe Apple's thinking is as stated by Aditya that the bulk of a release being the current release is during the following year (2026, for example) after it is released (2025, for example). There are other examples of these sorts of things. In the NBA, the season has always started in the Fall and ends in the Spring. When the season ends is how the season is named. So, this is the 2025 NBA season and the Pacers and Thunder are playing to be the 2025 NBA Champions. The NFL starts in the Fall and the end of the season is always in the beginning of the next year as well. The Super Bowl was played on February 9, 2025, but that was the end of the 2024 NFL season. So, contrary to the NBA, the NFL names it season based on when it starts, not when it ends. Maybe that is because more of the NFL season is played at the end of the year (2024 in the most recent example) whereas most of the NBA season is played in the first half of the following year (2025 in the current example).
  • Recent Achievements

    • Week One Done
      abortretryfail earned a badge
      Week One Done
    • First Post
      Mr bot earned a badge
      First Post
    • First Post
      Bkl211 earned a badge
      First Post
    • One Year In
      Mido gaber earned a badge
      One Year In
    • One Year In
      Vladimir Migunov earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      snowy owl
      252
    3. 3
      +FloatingFatMan
      251
    4. 4
      ATLien_0
      228
    5. 5
      +Edouard
      191
  • Tell a friend

    Love Neowin? Tell a friend!