Is it worth buying official ink cartridges?


Recommended Posts

Hi,

We're looking to replace our print cartridges and came across this page: http://www.cartridgesave.co.uk/ink-cartridges/HP/Officejet-4500.html

The recycled inks not only work out much cheaper per page, I also like the idea of recycling cartridges for environmental reasons

My main concern though, is whether or not I will ruin my printer - does anyone have experience in using recycled cartridges? How did you find it?

Thanks

I doubt it will ruin your printer. The company I used to work for used recycled ink jet cartridges instead of official HP ones. They worked just fine with the exception of the occasional one that would leak ink every where when you pulled the protective cap/film off. But for the price (and we was always able to get the bad ones replaced for free) its worth it.

But we didn't have color printers, I'd imagine color quality will vary.

Depends on what you print, legal documents or documents where you need quality id say so for originals, for homework and bits and bobs id say refills.

Only thing is it WILL void any warranty you have left on the printer so if it's a semi old one you've got nothing to lose.

Sometimes its cheaper to go get your own cartridge refilled. Tons of places do it, including Costco (if you happen to live near one in the UK).

All you do is drop off your own ink cartridge and they'll fill it up within the hour. Cost over here in the US (might be slightly different in the UK) is like $9 for the color, $8 for the black.

The quality? Well I've been using the same cartridge for my HP photosmart for at least a year now (get it refilled at Costco) and honestly stuff I print still looks exactly like it should.

Never had much luck with DIY refill kits or third party carts, but maybe it's just my particular printer being finicky too.

There's cases where buying the same printer new is cheaper than a colour cartridge.

Heh yea, I've done that a couple of times for my daughter's printer.. it's literally cheaper to just buy a new one. That's just screwed up.

I haven't bought ink cartridges in several years. In fact I don't remember when the last time I bought new cartridges.

Locally, we have a Goodwill Computer recycle store. I can go there and find new cartridges in their original boxes for $1 each. This past week I bought 4 new cartridges for my HP printer for $3.00. She only charge me $3 for 4 cartridges. The cartridges I bought were # 56, 57, 58, 59 for HP printers. You might see if there is a Goodwill Computer recycle store in your area. I believe they get them corporations donating large quantities of computer equipment and supplies. Also they don't always have the ones in stock you may need so go by there whenever near their store.

My experience of cheapy refill cartridges:

* From brand new report themselves to be about half empty already

* Dry up VERY quickly

* Clogg up your print heads

* Nowhere near as vibrant

* Had a few that simply just wouldn't print

* Ink has an odd smell about it

Again, these are just my own experiences - but I would much rather pay for OEMs

  • Like 2

I've had problems with the refills like leaking, low quality ink or the printer simply refusing to accept refilled carts. The mess and hassle of filling them isn't really worth the trouble in my opinion. I'm done with inkjets myself though, for printing documents laser printers are much higher quality and more economical and for photos you get higher quality prints for less money by just using a kiosk or ordering prints online.

  • Like 2

The only way non oem ink can do any real damage to a printer is to clog the print head. on most HP printers the print head is part of the cartridge (363, 364, 10 and 80 are the exceptions if i remember correctly) so if the head gets damaged just buying a new cartridge will fix it.

You do have to get a good quality ink, so don't buy the cheapest and there is no such thing as a universal inkjet ink.

The only way non oem ink can do any real damage to a printer is to clog the print head. on most HP printers the print head is part of the cartridge (363, 364, 10 and 80 are the exceptions if i remember correctly) so if the head gets damaged just buying a new cartridge will fix it.

That's one of the problems with inkjet refilling, your print head is likely clogged by the time you refill it, from debris or sitting dry too long. So you refill it and end up with crap quality or no printing at all.

I'm using aftermarket ink (G&G) and the quality seems to be the same as the Canon OEM inks. However, the cartridges do sometimes leak, so you might want to use a reputable site which has at least a 1 year replacement guarantee.

John C. Dvorak is convinced Epson owns G&G :laugh:

http://twit.tv/show/...eek-in-tech/355 @ 48:22

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • We had no idea as kids how much time and energy it took to be an adult 😅
    • The Trump administration doesn't want you to use OpenAI's GPT-5.6 without its approval by David Uzondu Image via @realDonalTrump (X) As OpenAI prepares the release of its next model, GPT 5.6, the White House has instructed the company to limit the distribution of the software to a small group of government-approved partners instead of the general public, as it has done with previous releases. According to The Information, OpenAI Chief Executive Officer Sam Altman sent an internal memo to staff on Thursday explaining that the federal government will approve access "customer by customer" during an initial preview phase. Altman noted in the communication that this restrictive rollout is "not [their] long-term model" for software deployment, and the company plans to work toward a "more sustainable" distribution method later. CNN said that both OpenAI and the Trump administration view the capabilities of GPT 5.6 on the same level as Anthropic's Mythos and that government officials intend to "collaborate with frontier AI labs to develop shared approaches for addressing the challenges of scaling this technology." The latest restriction comes just weeks after the US Commerce Department decided to restrict Fable, a version of Mythos with extra safety "guardrails" to prevent users from exploiting software vulnerabilities. Not long after the release, though, researchers at Amazon found a way to bypass these restrictions, prompting an aggressive response from federal authorities. The government ordered Anthropic to cut off access for non-US citizens located outside the US, non-US citizens living inside the US, and incredibly, even Anthropic's own foreign-born employees. Anthropic now appears to be building a workaround to resolve this compliance block with an update to its Privacy Policy that introduces a category called "Verification Data" to handle KYC and Digital IDs. This setup could mandate digital identity checks to filter users by nationality, requiring a government-issued ID and facial biometric data. Who knows? Maybe in the future, you would have to scan your US Passport or State ID to prove your citizenship before you are allowed to chat with Fable 5 (or any other model).
    • When Windows 7 was released I created an AutoHotkey script that uses Alt+` as a keyboard shortcut to move a window across monitors. I have been using that script for over 15 years and this is the first time I have come across another app that uses the same shortcut!
    • I called it last year that they wouldn't end support when they said there would. There are too many people still on Windows 10 waiting for something better to upgrade to and 11 ain't it! The recent promises of fixing Windows 11's many problems is nice, but unless they deliver on those promises in a big way then I expect customers will still want to stick with 10.
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      411
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      67
  • Tell a friend

    Love Neowin? Tell a friend!