KingCrackers build thread.


Recommended Posts

Yeah I didnt wanna get on it to hard since its public roads, if it was closed off id hammer it through those curves lol.

Good call. I hate idiots who try to race me on the road. I don't give in - no need to risk people's lives. Take that to the track! Speaking of, have you checked out tracks? :p

Good call. I hate idiots who try to race me on the road. I don't give in - no need to risk people's lives. Take that to the track! Speaking of, have you checked out tracks? :p

Yeah I get paranoid going around the curves cause I cant see whats coming id hate to floor it into on coming traffic. We have a drag strip close by id like to go there one night just to see what it will run, other guys on the sonic forum or are running mid to low 14's with theirs.

All your gains will be in the upper range, if you aren't hitting high enough RPMs, those mods are for naught. They don't help your low end nor is it a bottleneck for your turbo so I'm still scratching my head on that one,

"the stock airbox was restricting air flow to the turbo and thus not allowing it to give it that turbo sound." - :huh:

All your gains will be in the upper range, if you aren't hitting high enough RPMs, those mods are for naught. They don't help your low end nor is it a bottleneck for your turbo so I'm still scratching my head on that one,

"the stock airbox was restricting air flow to the turbo and thus not allowing it to give it that turbo sound." - :huh:

He was mostly right. The stock airbox will restrict some air flow, but will mostly keep engine noise down.

So by putting in an aftermarket air intake, you'll maybe gain a few HP (not much) and unleash more engine noise.

  • 2 weeks later...

Ever considered, say, buying a faster car than modding? :p

Or getting an actual car.

He was mostly right. The stock airbox will restrict some air flow, but will mostly keep engine noise down.

So by putting in an aftermarket air intake, you'll maybe gain a few HP (not much) and unleash more engine noise.

It won't do crap unless the fuel/air mixture are adjusted, and since this being controlled via the PCM, the OP is just emptying his wallet, not adding HP's..

Final piece put on, my intake.

And now here is what my car sounds like with the new intake installed. the stock airbox was restricting air flow to the turbo and thus not allowing it to give it that turbo sound.

Turbo sound? Sounds like every other lawnmower with a fart can on the road being driven by wannabe hipsters thinking a 4 banger is a muscle car..

  • Like 2

I mentioned this briefly before, but if you're running at double stock boost, you should really be checking what the turbo limits are, what the clutch/gearbox can take, etc. Don't "take it on good authority". You should be looking at hard figures and looking after your car instead of just chasing BHP and noise.

Upping the turbo boost pressure is a cheap and relatively easy way to gain a few more HP, but it comes at a cost - a heck of a lot of extra strain on other components that needs more than an induction kit/filter to keep running.

I have a similar engined car (I fell in love with its looks) - an Alfa Romeo MiTo. For example, my MiTo started life with a 155BHP 1.4 turbo. Since then I've fitted a new hybrid turbo, a modified catalytic converter, a custom "big bore" exhaust and a few other bits. With 18 psi of boost we got her up to 200BHP, and a much better feel. I've also upgraded the brake pads on the factory-fit brembos also fitted slightly stiffer suspension. That's well over ?2,500 worth of work - and not one bit of it is pushing original hardware too far, or chasing a fake noise.

Now, in theory, I could run it at 25 PSI and I could probably get 230BHP, but I wouldn't expect the engine/other components, or even the turbo itself, to last very long under such conditions (I'd be very close to the recommended limit of the already quite fragile M32 gearbox). I could also fit a ridiculous induction kit in an attempt to get more noise out of it (reminds me of people who used to fit ford focus induction kits to their Fiat Puntos to make it sound "better").

If you want to build a fast car on a budget, buy a mini and stick the VTEC engine from a Civic Type R in it. Don't go down the route of pushing turbos and gearboxes beyond their limits, or you're going to end up finding bits of your gearbox scattered along the motorway.

The turbo can make up to 30psi, the tune makes it put up to a max of 22psi. The trifecta tune is made to get max performance but with reliability. The info I got on my car is from the maker of the tune himself, he's done tunes for pretty much every GM car and a lot of other brands to. He's not a fly by night tuner. I'm not the only one running a tune on my Sonic, there's pretty much a whole forum of guys running the trifecta tune on their Sonic's without problems.

I'm not a honda guy. The Sonic is still new yet, when the Cobalt came out people where struggling to get it to 250hp but now people are getting 500+ HP out of them. Of course parts need to be upgraded and parts replaced to get really good amounts of HP, i'm not denying that but i'm on a budget so I can't just drop a ton of money down on parts right now.A DDM sponsored Sonic ran 13's on the track the other day. That's with some upgraded parts but nothing major.

Vincent in turbo cars a turbo back exhaust system does help performance.

Hey man, so have you chip-tuned it? Sorry if I missed it.

No I used a flash based tune. I data logged my car and sent it off to Trifecta Performance and they took a look at it and made a custom tune file for my car which they emailed me then I flashed it into my car.

No I used a flash based tune. I data logged my car and sent it off to Trifecta Performance and they took a look at it and made a custom tune file for my car which they emailed me then I flashed it into my car.

Ok, cool! Flashing the chip is what I meant :)

High five for doing it yourself!

p.s. you logged the data after completing the hardware upgrades, didn't you?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, It would appear so, according to https://finance.yahoo.com/news/how-to-hide-your-home-on-google-maps-apple-maps-204146687.html. Regards, Aryeh Goretsky      
    • Hello, The Nvidia Founders Edition 3080 video card is approximately six years old, correct? Have you looked into whether replacement fans are available for it? Perhaps replacing those will improve cooling, especially when combined with cleaning the card's heatsink and replacing the thermal interface materials. Regards, Aryeh Goretsky  
    • Hello, While ~104 GB of space may seem generous (at least compared to other e-readers which have 8-32GB), I feel at this price point the device should have a Micro SDXC card slot for expansion, particularly if it allows audio books to be installed and played. I hope to see more reviews of 6" phone-sized e-readers on Neowin in the future. It will be interesting to see how they compare. Regards, Aryeh Goretsky
    • Sandboxie Plus 1.17.8 / Classic 5.72.8 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.8 / Classic 5.72.8 release notes: Added added DisableCustomTitleOpt=[process,][y|n] to allow [#] sandboxie title markers on custom-titlebar windows (Delphi VCL, Qt, Electron) that were previously skipped to prevent DWM repaint CPU loops #5387 Changed updated bundled ImDisk driver to 3.0.2 #5419 Fixed fix Suppress logs for expected non-user SIDs #5422 SbieSvc.exe: SBIE2218/2219 error when run program as administrator #5417 fixed explorer.exe crashes in Application Compartment when Huorong Security is installed #5423 Download: Sandboxie Plus (64-bit) | 23.5 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!