Recommended Posts

I built a virtual rig going by the suggestions given in the last thread I made and this is it: http://pcpartpicker.com/p/C3we

CPU: Intel Core i5-3570K 3.4GHz Quad-Core Processor

CPU Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler

Motherboard: ASRock Z77 Extreme4 ATX LGA1155 Motherboard

Memory: G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-1600 Memory

Storage: Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive

Video Card: HIS Radeon HD 7850 2GB Video Card

Case: Corsair 400R ATX Mid Tower Case

Power Supply: SeaSonic 520W 80 PLUS Bronze Certified ATX12V / EPS12V Power Supply

Monitor: AOC E2243FWK 21.5" Monitor

Keyboard: Razer Arctosa Wired Standard Keyboard

Mouse: Steelseries Kinzu

It comes to around ~1,371 USD [prices are higher in India, I don't know why.]

Any suggestions on how I can make it even cheaper without harming the performance too much? I want the best ****ing performance-to-price ratio, haha.

Link to comment
https://www.neowin.net/forum/topic/1135312-rate-this-build-suggestions/
Share on other sites

If its for gaming i don't understand why you spend more on the cpu than gpu.

My rule of thumb is cpu price = 2/3 gpu price.

This is a rather expensive setup for what this gpu can do.

What CPU do you recommend?

EDIT: And, do you have a better GPU in mind? A better CPU-GPU combination?

Are you going to overclock? If not, you can skip the CPU cooler, knock the i5 down to a lower i5 (or i3) and go to a business class motherboard.

Will Overclocking make a big difference? I am not tech-illiterate and so if OCing is worth the trouble and extra buck, I might just do it.

Can you give me a specific model for an i3/i5?

I'd say that CPU is fine, but maybe you could look at a 7950? I don't know how much more that would be in India, but it would certainly provide a very large improvement.

I would but it would increase the price by a lot.

Will Overclocking make a big difference? I am not tech-illiterate and so if OCing is worth the trouble and extra buck, I might just do it.

Can you give me a specific model for an i3/i5?

People will have differing opinions about this, but if you've never done it in the past, I don't know that a $200+ i5 is the best place to start.

The i3-2125 is a good processor. Use the stock cooler (unless you find out you need a better one, but you probably won't), and look at the costs of H77 or B75 motherboards. They might not be worth the downgrade, but I don't know how the prices spread out in your market.

What CPU do you recommend?

EDIT: And, do you have a better GPU in mind? A better CPU-GPU combination?

Well i have not look at the market enough lately to make any definitive recommendation. My PC is 3 years old and i dont plan to upgrade for another year. Rocking an old overclocked i5 750 and its still more than enough.

The only thing i know is i never spend more on the cpu than gpu when it comes to a gaming system. I would downgrade to the less expensive core i5 specially if you plan to overclock one day (you can run it stock for a while until its not powerful enough). But i've not read reviews so it might not be a good idea. That PSU looks expensive to me. You could downgrade the case too. It's an awesome case but expensive. I dont know the price where you live though. You might want to skip SSD for now too if you are short on money and add one later. ssd are great but 60gb is hardly worth it imo. It will speed boot but you wont even be able to put anything but the os and some apps on it.

I would upgrade to at the very least a 7870 or a 660oc or something like that. Preferably even a 7950 or a 660ti if you can but it might be too expensive.

I would not downgrade the mother board too much. It's a vital part of the system and a good mb is the basis of a good system.

1: i5 is ideal, current games can run 4 threads at a time.

2: Uprate the GPU to a Nvidia 600 series at least take advantage of on-board Physix

3: Your mother board Extreme 4 is primarily taking advantage of the on-board video from the i5, which you are not using anyways - drop down to the Pro 3.

I would not downgrade the mother board too much. It's a vital part of the system and a good mb is the basis of a good system.

Unlike Ivy Bridge, most of the Sandy Bridge boards will work fine.

1: i5 is ideal, current games can run 4 threads at a time.

2: Uprate the GPU to a Nvidia 600 series at least take advantage of on-board Physix

3: Your mother board Extreme 4 is primarily taking advantage of the on-board video from the i5, which you are not using anyways - drop down to the Pro 3.

1) i5, sure, but it doesn't have to be the k series. Also the 2125 can do 4 threads. I've not seen any gaming comparisons between a low end i5 and a newer i3, but I suspect they'd only be a few fps apart.

2) The 660 is probably at the best price point for him now

I would suggest an AMD alternative with an FX-6300 and a ASRock 970 Pro3 board. At stock the FX might be slower in most games than the i3, but it's faster in almost everything else and you'll be able to overclock it to compensate (unlike the i3). On top of that, the cash difference can be put towards a better GPU, which makes a bigger difference when it comes to games. I don't know what the prices are in India but performance-wise it should be something like this 7850<660<=7870<660Ti<=7950.

Another thing I'm not sold on is the monitor. How much does this LG cost in India? I can't give you much advice here because I'm not up to scratch, but if you're going for 1080P go for 23".

Well i have not look at the market enough lately to make any definitive recommendation. My PC is 3 years old and i dont plan to upgrade for another year. Rocking an old overclocked i5 750 and its still more than enough.

The only thing i know is i never spend more on the cpu than gpu when it comes to a gaming system. I would downgrade to the less expensive core i5 specially if you plan to overclock one day (you can run it stock for a while until its not powerful enough). But i've not read reviews so it might not be a good idea. That PSU looks expensive to me. You could downgrade the case too. It's an awesome case but expensive. I dont know the price where you live though. You might want to skip SSD for now too if you are short on money and add one later. ssd are great but 60gb is hardly worth it imo. It will speed boot but you wont even be able to put anything but the os and some apps on it.

I would upgrade to at the very least a 7870 or a 660oc or something like that. Preferably even a 7950 or a 660ti if you can but it might be too expensive.

I would not downgrade the mother board too much. It's a vital part of the system and a good mb is the basis of a good system.

1: i5 is ideal, current games can run 4 threads at a time.

2: Uprate the GPU to a Nvidia 600 series at least take advantage of on-board Physix

3: Your mother board Extreme 4 is primarily taking advantage of the on-board video from the i5, which you are not using anyways - drop down to the Pro 3.

Unlike Ivy Bridge, most of the Sandy Bridge boards will work fine.

1) i5, sure, but it doesn't have to be the k series. Also the 2125 can do 4 threads. I've not seen any gaming comparisons between a low end i5 and a newer i3, but I suspect they'd only be a few fps apart.

2) The 660 is probably at the best price point for him now

I would suggest an AMD alternative with an FX-6300 and a ASRock 970 Pro3 board. At stock the FX might be slower in most games than the i3, but it's faster in almost everything else and you'll be able to overclock it to compensate (unlike the i3). On top of that, the cash difference can be put towards a better GPU, which makes a bigger difference when it comes to games. I don't know what the prices are in India but performance-wise it should be something like this 7850<660<=7870<660Ti<=7950.

Another thing I'm not sold on is the monitor. How much does this LG cost in India? I can't give you much advice here because I'm not up to scratch, but if you're going for 1080P go for 23".

Okay, these are the processors available to me: which one do you recommend?

bV8Shzg.png

Unlike Ivy Bridge, most of the Sandy Bridge boards will work fine.

1) i5, sure, but it doesn't have to be the k series. Also the 2125 can do 4 threads. I've not seen any gaming comparisons between a low end i5 and a newer i3, but I suspect they'd only be a few fps apart.

We are only talking the difference between physical cores and hyper-threading but yes my point is - as a decent simple to follow guide i5 will do the job but an i3 is a possibility.

2) The 660 is probably at the best price point for him now

Good range - ti edition would be fantastic.

[/size]

Okay, these are the processors available to me: which one do you recommend?

bV8Shzg.png

What OS are you looking to run?

I would go for the i5 personally but the wife has the Bull Dozer - with a decent GPU you will be fine either way.

What OS are you looking to run?

I would go for the i5 personally but the wife has the Bull Dozer - with a decent GPU you will be fine either way.

Aren't the i5's last generation though? I'll be running Windows 7/8 64-bit

Okay, so here is the nicest configuration I have managed to make so far: http://pcpartpicker.com/p/C5lh minus the CPU and MB.

I need someone to give me a good MB+CPU for that ^ so that the price stays low and I get the most out of my GPU.

I'd probably go with the FX 4100 for now and plan for an upgrade when the improved Piledriver hits some time this year, otherwise it's the FX 8120. The motherboard I've already suggested. Why only those CPUs?

You'll need a bigger PSU, at least a good 550W.

Like this?

http://pcpartpicker.com/p/C5Ha

Aren't the i5's last generation though? I'll be running Windows 7/8 64-bit

Well this is how I would break it down.

The CPU is not the major concern, it can be a problem if the performance is too low but you can get away with either the i5 or FX 8120. The i5 has less cache and the FX 8120 has more cores but also an older instruction set. The key reason for my choice would be the upgrade ability you have IF you use a socket combination that leaves you open to Intel vs AMD.

You might enjoy the 8-cores at a later stage but games are not using this many threads yet.

IF you do go for the FX 8120 than I would recommend Windows 8 as the operating system has better support for 8-cores.

You don't have anything else than Seasonic ? I don't know about where you live but here Seasonic are expensive borderline overpriced imo. They make good psu but when you need to spend 100$ for a 600W psu ...

There's other good less expensive brand around. My psu is by ocz. Bought it 4 years ago and working perfectly with an overcloked system. It was if i remember corectly 20$ or 30$ less expensive than equiv Seasonic.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nothing kills CMF Phone 2 Pro's successor due to rising memory prices by Hamid Ganji Storage and RAM prices have been rising over the past year, leading to a significant increase in the cost of electronics for customers around the world. Many companies are now revising their plans for upcoming devices due to higher component costs and overall production expenses. CMF is the latest company to cancel the successor to one of its best-selling phones due to rising memory prices. CMF is a sub-brand of Nothing and focuses on making budget smartphones for growing markets. The brand launched the CMF Phone 2 Pro last year with some eye-catching specifications and an affordable price. While many customers may have been waiting for a successor this year, one of the company’s executives has announced that CMF will not release a new smartphone this year. And AI is to blame. As Nothing co-founder Akis Evangelidis announced on X, the company has been working on a successor to the CMF Phone 2 Pro, but with current memory prices, it cannot “build a phone that feels like a genuine step forward at a price that makes sense for CMF.” So, no new CMF phone will be launched this year. Meanwhile, Evangelidis said the company still has several new products in the pipeline, including some in entirely new categories. He added that the Nothing brand will also continue launching new products through 2026. Budget smartphones are among the first victims of the surge in RAM and memory prices, as they have become more expensive to build. The sharp increase in memory costs could also reshape the traditional price ranges associated with budget phones. Apple CEO Tim Cook also recently said that price increases for some of the company’s products are unavoidable because RAM and memory have become significantly more expensive this year. Analysts estimate that the base price of the upcoming iPhone 18 Pro could rise to $1,399 due to current market shortages.
    • Nudge me when they bring back hardware audio acceleration so I can get my EAX 5 back. We've evolved graphics to real-time path tracing, but regressed audio some 15 years back in time with this stupid software audio stack.
    • Ocenaudio 3.19.4 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.4 changelog: Adds fallback fonts so every language and symbol displays correctly Improves autosave and session recovery stability Improves region navigation and display Fixes a crash when the level meter is used on displays with a scaling greater than 200% Fixes memory corruption when using the silence selection tools Fixes crashes when closing a file while effects are still being processed Fixes a freeze when applying effects to many files at once (macOS) Fixes crashes related to audio devices on Windows Fixes invalid file names when exporting regions whose label is used as the file name Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hasleo Disk Clone 5.8.2.1 by Razvan Serea Hasleo Disk Clone is a free and all-in-one disk cloning software for Windows 11/10/8/7/Vista and Windows Server that can help you migrate Windows OS to another disk, clone one disk to another disk or clone one partition to another location quickly and efficiently. Completely Free Windows Migration and Disk/Partition Cloning Software Migrate Windows from one disk to another without reinstalling Windows, apps. Clone one disk to another and makes the data on 2 disks are exactly the same. Clone a partition to another location without losing any data. Easily adjust the size and location of the destination partition. Convert MBR to GPT or convert GPT to MBR by cloning. Creation of Windows PE emergency disk. Extremely fast cloning speed and multi-language support. Supported OS: Windows Vista/Server 2008 or later, fully compatible with GPT and UEFI. Hasleo Disk Clone 5.8.2.1 changelog: Fixed an issue that caused disk enumeration to fail Fixed an issue where WinPE created under Windows ARM64 26H1 did not work properly Download: Hasleo Disk Clone 5.8.2.1 | 32.3 MB (Freeware) Link: Hasleo Disk Clone Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This got me thinking, would you rather a self driving car prioritise protecting its passengers or everyone else? I'd choose the one that keeps me and my kids safest. At some point, these cars have to make those choices already, don't they? Wonder if we have a way to find out what way they lean.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      546
    2. 2
      +Edouard
      188
    3. 3
      Michael Scrip
      78
    4. 4
      PsYcHoKiLLa
      74
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!