Recommended Posts

Hey all, as some of you know i brought a motherboard ram and cpu from chicane on this forum and all had been going well till i turned off the computer this morning as i left it on to download bf3.

Anyway when i got back from my college interview i turned on the computer and noticed that no picture appeared on the screen and the fans were going at full pelt (speed), turned it on and off a few time and same everytime. I then started to remove parts and build it back up, but again i still mostly had it with the fans spinning and no picture, the first time it did boot i let it start to load windows then about 30seconds into the load it just rebooted at first i thought it was because of updates and it started again then rebooted and then the fans were going full speed again....

an hour later

Rebuilt the machine a few times, played with the PSU wires incase that was the issue and only loaded as far as the bios (logged into the menu kept an eye on voltages and cpu temp) auto reboot and most times fail to reach post screen again. I then got my old components and put them onto a box and connected them up to check the PSU and had no issues so re-tried the parts i brought again and sometimes it would boot to post but most times it failed. I plan on (if i can catch my mate at home) taking the board, cpu and memory to a friends just to double cehck the PSU if he has a decent one but i can not think of anything else it could be or any other checks i could do. Couldnt be the Battery in the board could it? Gues si'll check that tomorrow....

Anyhow if it is the board can anyone recommend one, i know next to nothing about intel been an amd fan boy for many years only problem i have is all the other boards are mostly second hand and only have 2 ram slots when i need 4 to use all the ram.

Like i said worked fine for about 15hours then all of a sudden this seems odd anyway any help and wisdom is welcomed.

oh yes the parts:

Intel Q9550 CPU with retail cooler.

* Gigabyte EP43-DS3 Motherboard

* 8GB (4x2GB) Kingston HyperX 4GB (2x2GB) DDR2 8500C5 1066MHz Dual Channel RAM

Link to comment
https://www.neowin.net/forum/topic/1135504-motherboad-dead/
Share on other sites

It could be the battery since you shut it off. They are only about 3 dollars US.

I'll try that tomorrow then, i have one in the motherboard i have now and anothr in another motherboard i have that idea only popped into my head as i wrote the above cleared the cmos though by removing it just never thought about a swap

edit:

Infact i'll try it now with the motherboard at the side, already rebuilt the computer with the old parts brb.

No difference tried battery from motherboard i stopped using and one from the motherboard im currently using same thing though no booting to the post screen. Also found out the fan making the most noise was the gpu fan not the cpu one like i thought, also tried another gfx card i remembered i had which uses less power and no joy. I'll ask friends if they have a 775 cpu laying around see if they mind putting it in this motherboard guess thats the best way find out but tbh i dunno anyone that has one so could be a challenge lol

Edit

Off my mates tomorrow try out his PSU see if he can figure out the issue.

I will have to see what my mate says when i visit him his eye to detail is alot better than mine but everything looks good imo on the board, plus i'll see what he says about his cpu in the board as a check with his psu. Everything ive seen on the internet said mainboard or psu, though i have had suggestions that the cpu could be overheating but i dont see that from a cold boot tbh plus with core temp highest i saw was 57c after a bf3 play and in the bios when i left it on for testing it never went over 30c but rebooted then started to fail to post.

If its the board then i need to try and get another one as soon as i can this duel core is doing my nut in ever so slow just lately facebook freezes, jumping tabs which youtube is on means silence and pause of the video while it attempts to catch up and if it fails it normally means "Flash player has crashed" lol

Anyway thanks for the feedback soon as i know more i'll post.

Fingers crossed you get to the bottom of it. I feel bad but hand on heart that motherboard served me for about 3 years and was 100% reliable.. If I had any doubt about it I would never have sold it on.

Anyway - keep at it!

Fingers crossed you get to the bottom of it. I feel bad but hand on heart that motherboard served me for about 3 years and was 100% reliable.. If I had any doubt about it I would never have sold it on.

Anyway - keep at it!

Thanks Chicane and everyone else.

Turns out it was the psu, dont know why its working on my old gear but not this motherboard as it was a decent one too, sure its old now but its better than the one i borrowed i feel.

What i had: 600w enermax

What i borrowed: 425w Hipper

You would fo thought the more wattage would be better! haha guess not :/

Guess i'll find a replacement soon will have to do some research.

It might not be the load causing the problem, but could have just failed... it does happen.

I have an OCZ StealthXStream (I think) power supply which started doing something similar to yours. You could power the machine on and it'd work for about 30 seconds.. might start to boot Windows, or just get into Windows before turning off. Then would turn on again and keep doing the same thing. Even if you went into the BIOS, it'd still just reset.

Tested with a spare PSU from work and found it was indeed faulty.. worked fine with the new PSU. Luckily it turned out to be under a 3 year extended warranty with OCZ and it was about 2 years old so I was able to send it back and get a brand new one off them - no problems so far!

I was running that board, the quad core CPU, Palit GeForce GTX 560 OC, SSD, 1TB 7200RPM HDD, and PCI-e sound card (which needed a molex connection for additional power) off that 500W OCZ power supply for years so your 600W enermax should be more than up to it!

Anyway - glad you got to the bottom of it.. even if it does mean a bit more expense! :(

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
    • Seems like Neowin has transitioned into being simps for the white house. I can't find a review for the last UFC games that came out.
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      141
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!