Beige vs Black Optical Drives


Recommended Posts

I was watching a video by Tek Syndicate on YouTube today, and Logan mentioned that optical drive CD/DVD burners with a black faceplate get hotter than beige ones and decrease writing speeds. Usually Logan is quite accurate with his information, but I found this to be a little too much. I've searched online for confirmation on this and I couldn't find ANYTHING. It's logical that it could be possible because black absorbs heat more, but is it really that significant? I can't imagine that being true. He also mentioned that orange faceplates are the best because they disperse heat easier. I don't doubt that, but do corporations even make orange faceplates? This is all very confusing, but interesting nevertheless.

I would link the original video, but I can't find it at the moment, even in my YouTube history. (I watched 3 Teks today and they're ~35 minutes long and don't want to look through them.)

Can anyone confirm this information?

Link to comment
https://www.neowin.net/forum/topic/1136438-beige-vs-black-optical-drives/
Share on other sites

It's logical that it could be possible because black absorbs heat more, but is it really that significant?

No, it isn't.

With direct sunlight shining on the PC, both beige and black faceplate will get hot and it won't affect the writing speed at all.

Actually black will get slightly hotter

dont think it will affect performance though

the "color" black (actually a dull flat black) absorbs every wavelength of visible light. this absorption creates heat, just like when you stand in the sun. white reflects all "colors" but white so it reflects most of the heat

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

People get these ideas because it is a scientific fact

Black absorbs all light whereas white reflects all light back. The energy that black absorbs as light manifests itself as heat.

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

These ideas come from studying physics mate. Black absorbs all energy in the visible light spectrum. some energy is reflected off a black object in the infra red spectrum (HEAT) and with all the energy the material absorbs, it will have an increase in temperature over an object of any other colour. Having said that, the claims that a black optical drive will run hotter is false because there are many other variables that will have a much greater impact on the temperature of the drive than it's colour. Prime example is friction from it's moving parts.

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

Funniest post of the day. I sure hope he wasn't trying to be serious.

  • Like 3

LOL.... OP, you got trolled, even if it did get "hotter" it isn't going to change how fast the drive writes. I hope you didn't spend all day looking for different colored face plates to increase your burning speed...

And yes, black reflects less light back, but are we talking about energy from a light source like the sun or are we talking about heat? Black won't get "hotter" because of the ambient temp, it just will reflect back less light if a light source is pointed at it, increasing it's temp.

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

Funniest post of the day. I sure hope he wasn't trying to be serious.

Actually I think you guys are reading it wrong LUTZIFER is actually right.

Black does not "absorb" heat in the way I think some of you are describing. I think it is coming off as "it grabs ambient heat, it just doesn't reflect as much back thus that increases the temp of a black surface/object.

No, it isn't.

With direct sunlight shining on the PC, both beige and black faceplate will get hot and it won't affect the writing speed at all.

The increased prevalence of black optical drives is due to the increased prevalence of black PC cases - nothing else, or less.

It's not just in the BYO space (which is where black PC cases took off, primarily due to being the opposite of beige) - what is the prevailing color among OEMs these days (DELL and HP especially)? White = Apple, pretty much (white is the prevalent color of most desktop Macs and all portables - the Mac Pro is the desktop exception), while black has become the New Beige.

Modders are, in fact, moving as far away from black, beige, AND white as primary/base colors as possible for that reason.

(That said, I went specifically with black faceplates for my last two optical drive purchases to match the cases - both were going into black cases, however, the drives DID include beige faceplates.)

Christ... it ain't rocket science.

Every time someone says this, I am reminded of October Sky(for people who haven't see it, its a movie about some average kids going to an average school doing rocket science). Do people actually think rocket science is hard? Go to Walmart and pick up a rocket kit. Congratulations, you are now a rocket scientist. Any child can do this. If you are trying to make a point, at least use something that is hard to accomplish and understand, like string theory, why females act the way they do, or stem cell research.

LOL.... OP, you got trolled, even if it did get "hotter" it isn't going to change how fast the drive writes. I hope you didn't spend all day looking for different colored face plates to increase your burning speed...

And yes, black reflects less light back, but are we talking about energy from a light source like the sun or are we talking about heat? Black won't get "hotter" because of the ambient temp, it just will reflect back less light if a light source is pointed at it, increasing it's temp.

Actually I think you guys are reading it wrong LUTZIFER is actually right.

Black does not "absorb" heat in the way I think some of you are describing. I think it is coming off as "it grabs ambient heat, it just doesn't reflect as much back thus that increases the temp of a black surface/object.

Black reflects no light. Black is the absence of light. Light (white) is made of of seven basic color light rays (wavelengths). An object of color reflects its own color light ray and absorbs the remaining light. Thus, a white object reflects ALL light and absorbs none, a red object reflects red light and absorbs 6 color rays, and black reflects no light - absorbing ALL rays. The more rays absorbed, the greater the heat.

Unless things have changed in basic, fourth grade science classes.

Every time someone says this, I am reminded of October Sky(for people who haven't see it, its a movie about some average kids going to an average school doing rocket science). Do people actually think rocket science is hard? Go to Walmart and pick up a rocket kit. Congratulations, you are now a rocket scientist. Any child can do this. If you are trying to make a point, at least use something that is hard to accomplish and understand, like string theory, why females act the way they do, or stem cell research.

Typically it is used when referring to putting a object into orbit or landing it on another planet. Getting a model rocket and shooting it off is not the "science" part however. Building the rocket from scratch and putting it into orbit, would be more what the term is used for. But I get what you are saying.

OMG, black does not get hotter. Where do people get these ideas?

Personally I think that MYTH started with black vehicles, which seem to get hotter.

The color black does NOT absorb heat, in any way, it's just that on vehicles a shiney color reflects sun off better than a dark color.

Hense why a black car would end up being hotter compared to a silver car.

Christ... it ain't rocket science.

its fact.. black does absorb ... while lighter shiner reflects

This thread is brilliant. It really makes me fell better about myself.

Just to throw something else in there though. Black objects do reflect light!.. Well light energy anyway. However when it is 'reflected' it is 'reflected' in the infrared wavelength so we cannot see it with our eyes but it is there.

;)

Wow, this is one of the strangest PC myths I've ever heard.

Let's be realistic here. The heat from the inside of your PC case is going to heat up an optical drive much much much more than some infrared rays hitting the small surface area of the front bezel of the optical drive. And the heat inside your case fluctuates quite a bit depending on what you're doing, so it's simple to disprove this "myth".

Plus these bezels are plastic, which is a poor conductor of heat.

And regarding the discussion of white vs black and heat absorption, let's go back to the basics here.

First of all, "heat" is simply caused by the vibration and rubbing of particles.

A black surface absorbs all visible light waves, so there will be a lot of particles "rubbing" together which creates heat.

Since a white surface reflects these light waves, these particles aren't present to create the same magnitude of heat.

It's basically as simple as that.

Typically it is used when referring to putting a object into orbit or landing it on another planet. Getting a model rocket and shooting it off is not the "science" part however. Building the rocket from scratch and putting it into orbit, would be more what the term is used for. But I get what you are saying.

Well in the case of the Walmart rockets, you build those yourself using the parts and instructions. Go to hobby lobby and you can find kits to design the thing. October Sky was about average kids building rockets from scratch. Also, don't forget that rocket science includes missiles. "Rocket Science" is no where near as hard as people make it out to be when using that phase.

Quick question

Why do Islamic men and women tend to wear black clothing from head to toe in the searing heat of the day?

Wouldn't it be more beneficial to them if they wore white? Seeing as Black apparently absorbs so much more heat...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Waymo recalls self-driving software after cars enter closed freeway work zones by Paul Hill Waymo, the self-driving car maker owned by Alphabet – the parent company of Google –, has recalled some of its fifth-generation Automated Driving Systems (ADS). It did so after some of its cars drove through closed construction zones. According to the National Highway Traffic Safety Administration (NHTSA), the affected vehicles were capable of driving through a closed freeway construction zone and continuing to drive at speed. The listing on the NHTSA website says that Waymo is currently developing a solution to fix this issue, but in the meantime, freeway driving is being restricted. Waymo will update its ADS software so that vehicles can detect when they can avoid entering construction zones. According to the Safety Recall Report, on April 20, 2026, Waymo’s Field Safety Committee began meetings reviewing an event from April 11, 2026, and five events from April 19, 2026, where Waymo’s autonomous vehicles didn’t recognize and drove past ramp closure signs into the pre-planned freeway construction zones. This took place in Phoenix, Arizona. Separately, on May 18, 2026, seven Waymo vehicles entered freeway lanes with active construction in the San Francisco Bay Area by driving between cones that were placed to show the lane was closed. On the back of both of these events, Waymo restricted freeway driving until it could address the issue. In June, Waymo’s Safety Board reviewed the issue and additional information related to ADS performances around construction zones; then, as a result, it decided to conduct a recall. This development is not good for Waymo as it adds to a growing list of technical hiccups its cars have experienced. Ultimately, it will lead to more scrutiny from lawmakers around the world who will be more cautious about letting autonomous vehicles on their roads without tighter regulation. For readers in areas where Waymo operates, does this news make you more wary about stepping into one of these vehicles?
    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
    • And with SO much better perf than the laggy mess that is Files.
  • Recent Achievements

    • First Post
      BizSAR earned a badge
      First Post
    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      598
    2. 2
      +Edouard
      190
    3. 3
      PsYcHoKiLLa
      80
    4. 4
      Michael Scrip
      76
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!