Recommended Posts

Hey All,

Sadly i am moving back home to live with the parents, they have a standard ADSL Max package from BT and are using the BT Hub3.

I would like to replace that with a new modem / router which is dd-wrt compatible but i have no idea what is a decent router these days i am abit out of touch with it all :( I want something that is under ?100 if possible tbh,

Any suggestions welcome!

Cheers x

I am enjoying my Linksys Cisco WRT160NL running the 2nd latest release of DD-WRT and it is 100% stable (hence I haven't upgraded to the latest release)

You can get them for well under ?100 on ebay

http://www.ebay.co.uk/sch/i.html?_trksid=p5197.m570.l1313&_nkw=WRT160NL&_sacat=0&_from=R40

A router+modem that is DD-WRT compatible? According to their hardware table that restricts the search to only one single model: Buffalo WBMR-HP-G300N (Lantiq AR9@333 + Atheros AR9280). If you want save a good amount of money the BT Home Hub V2B can run OpenWRT on it. The Asus DSL-N55U can't run dd-wrt or open-wrt but it's one of the best routers with modem you can find for that price, awesome hardware and rock solid firmware (much more reliable than previous Asus routers).

I am enjoying my Linksys Cisco WRT160NL running the 2nd latest release of DD-WRT and it is 100% stable (hence I haven't upgraded to the latest release)

You can get them for well under ?100 on ebay

http://www.ebay.co.u...cat=0&_from=R40

Hey Mate, is this the correct model? http://www.dabs.com/...WRT160NL&src=16

Cheers :) ill buy it for delivery Saturday if so :)

Hey Mate, is this the correct model? http://www.dabs.com/...WRT160NL&src=16

Cheers :) ill buy it for delivery Saturday if so :)

Yep, that's the one :)

When you first flash DD-WRT to it, there are 2 firmwares, first flash is for Linksys > DD-WRT transition, 2nd one is the full DD-WRT firmware, and any updates after that only need the main firmware flashing

Hey Mate, is this the correct model? http://www.dabs.com/...WRT160NL&src=16

Cheers :) ill buy it for delivery Saturday if so :)

Maybe you should consider looking at some other models too, the WRT160NL is pretty old (it came out in 2009) and the range is quite mediocre even if you replace the antennas (source: I have bought basically every Linksys model since the WRT54G).

Maybe you should consider looking at some other models too, the WRT160NL is pretty old (it came out in 2009) and the range is quite mediocre even if you replace the antennas (source: I have bought basically every Linksys model since the WRT54G).

My wifi range is superb with the stock antennas, neighbours 2 doors away can connect easily, coverage all over my house

Just used DD-WRT to boost the range / power

Capture.PNG

My wifi range is superb with the stock antennas, neighbours 2 doors away can connect easily, coverage all over my house

Just used DD-WRT to boost the range / power

A router range can be relative, the same router could cover your whole house but at the same time cover barely one room in somebody's else house, it depends on the walls, on the interference and on the country's regulations for transmit power. I had much, much better performance with other linksys models like the dual-band E3000 rather than with the WRT160NL that I found having a similar range to the older WRT160N or the WRT300N. Anyway there are websites that benchmark routers and while certainly better than the average the WRT160NL couldn't nearly match to some of the newer models (see here http://www.smallnetb...d-router-charts ). Also if you actually use the USB port having a 100mbit LAN and only a 400mhz CPU and 32mb of ram could greatly limit the samba performance when sharing drives. That Asus modem I linked has 128mb of RAM and two 600mhz+ CPUs and it literally flies (I had to glue it to the table) with samba.

A router range can be relative, the same router could cover your whole house but at the same time cover barely one room in somebody's else house, it depends on the walls, on the interference and on the country's regulations for transmit power. I had much, much better performance with other linksys models like the dual-band E3000 rather than with the WRT160NL that I found having a similar range to the older WRT160N or the WRT300N. Anyway there are websites that benchmark routers and while certainly better than the average the WRT160NL couldn't nearly match to some of the newer models (see here http://www.smallnetb...d-router-charts ). Also if you actually use the USB port having a 100mbit LAN and only a 400mhz CPU and 32mb of ram could greatly limit the samba performance when sharing drives. That Asus modem I linked has 128mb of RAM and two 600mhz+ CPUs and it literally flies (I had to glue it to the table) with samba.

I have a Samba share set up via the USB port and I get the full 100mbps (10MB/s) read/write to the drive via LAN, burst speeds upto 15MB/s, I only have wireless G laptop so can't test if it can perform any faster atm

Of course there are going to be better routers, but OP wanted a router for under ?100 and some feedback from someone who owns one.

For a typical house full of devices, it manages extremely well, I have all 4 LAN ports wired to different devices, I have 5 wireless devices connected with around 3-4 connected at any one time and its fine

If you have experience with a better router at a similar price then by all means, advise away ;)

I dont think that WRT160NL actually has ADSL build in, meaning i would need to user a separate modem to connect to the internet yea?

Yep, I have: Phoneline > Openreach Modem > WRT160NL > Devices

Not sure I've seen any DD-WRT ADSL Modem/Routers

I have a Samba share set up via the USB port and I get the full 100mbps (10MB/s) read/write to the drive via LAN, burst speeds upto 15MB/s, I only have wireless G laptop so can't test if it can perform any faster atm

USB2 can go much faster than that, I managed to get full speed only from 600mhz devices mostly because samba is very CPU intensive.

Of course there are going to be better routers, but OP wanted a router for under ?100 and some feedback from someone who owns one.

For a typical house full of devices, it manages extremely well, I have all 4 LAN ports wired to different devices, I have 5 wireless devices connected with around 3-4 connected at any one time and its fine

If you have experience with a better router at a similar price then by all means, advise away ;)

There are hundreds of routers that can run DD-WRT/OpenWRT very reliably nowadays so it's just a question on what you actually want from one, for example I bought a router for OpenWRT a couple weeks ago to use as 3g router, I paid it 25? (TP-Link 3420) yet it never freezed or had to be restarted (and the wifi range is actually decent). Some have lots of ram, some have fast CPUs, some have multiple USBs, some have 3 antennas or can go up to 1W of transmission power, there's as lot to choose from.

I dont think that WRT160NL actually has ADSL build in, meaning i would need to user a separate modem to connect to the internet yea?

As I previously wrote in my post there is literally one (1) modem+router that can run DD-WRT. The reason is that DSL drivers are proprietary and usually their source code is never released so DD-WRT and OpenWRT developers have a very hard time getting those to work. If you don't mind running OpenWRT instead you can find the BT Home Hub V2B (it has to be the B revision) with the modem, wifi 802.11n and USB: it's very cheap and very reliable.

USB2 can go much faster than that, I managed to get full speed only from 600mhz devices mostly because samba is very CPU intensive.

I formatted my Samba drive to EXT4 to get those speeds, with FAT32 and NTFS is was 2-6MB/s tops

I formatted my Samba drive to EXT4 to get those speeds, with FAT32 and NTFS is was 2-6MB/s tops

I think it's just dd-wrt not being much performant on those filesystems due to using the kernel driver rather than ntfs-3g and still coming with a pretty old kernel (2.4?). With that CPU it should go twice that speed, maybe if you install ntfs-3g or openwrt it'll have better performance.

That Buffalo looks decent, im going to look for reviews now.

You can't follow the reviews if you're going to use a third party firmware, the behavior could be entirely different with another firmware. That router works well only with OpenWRT, forget using DD-WRT on it, when the official dd-wrt build for that router was compiled the lantiq support was very lacking and the wireless driver used for the atheros wifi wasn't in much better shape. OpenWRT supports several different lantiq platforms and routers (DD-WRT instead supports only that model) so you're very likely to have a much better experience on it.

You can't follow the reviews if you're going to use a third party firmware, the behavior could be entirely different with another firmware. That router works well only with OpenWRT, forget using DD-WRT on it, when the official dd-wrt build for that router was compiled the lantiq support was very lacking and the wireless driver used for the atheros wifi wasn't in much better shape. OpenWRT supports several different lantiq platforms and routers (DD-WRT instead supports only that model) so you're very likely to have a much better experience on it.

buffalo routers come with dd-wrt on them, so he can indeed follow reviews

buffalo routers come with dd-wrt on them, so he can indeed follow reviews

Not all models do and the firmware is preinstalled only in some regions (USA only?), I still haven't seen one shipping with dd-wrt officially here. From the screenshots of the webui for that model it certainly doesn't come with dd-wrt nor the product page shows the dd-wrt logo for it.

Not all models do and the firmware is preinstalled only in some regions (USA only?)

ah, that explains that. I'm in the US and I'm pretty sure they all come with dd-wrt here. didn't realize it was different in other regions

Well maybe i got a good device? I put DD-WRT on it and the thing is working great so far, the only issues i heard of was the network ports on the device being abit flakey, but mine appear to be fine :)

Wireless is great, the signal now reaches a lot further than it did on stock firmware, most likely because i can increase the signal strength etc. For a cheap ADSL / Router, its not performing bad at all tbh.

I will update this thread if i get any problems though, i am not going to be biased because i paid for it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • What I like about Paint is using it almost exclusively for cropping and resizing images I get elsewhere--it's quick, easy and cheap... I keep it glued to my taskbar, in fact. Also, the clipping tool comes in handy, as well (hit print scrn on the keyboard and it activates immediately.)
    • I still remember it fondly today. It was so cool to work in 64-color Half Bright mode and 4.096-color HAM mode (interlaced) when x86 was still in 4-color CGA or 16-color EGA low res. C= never realized what it had until it was far too late--the failure of C= was the failure of its top management. The C= Amiga was 20 years ahead of its time, I always thought. It didn't hurt that in only 512k of chip memory, the Amiga could preemptively multitask when Apple was still doing gray scale graphics on tiny screens and along with everyone else was doing cooperative multitasking (running more than one app at a time in resident memory, but you could only run one of them at a time--had to manually switch between them.) I had a ball with AREXX scripting running between programs that had AREXX ports so that when you sent other applications data and instructions, those running applications could process the same in real time to output! Memories...
    • I'm not sure about that, but it at least "does" a version of 7.1 that this brand new card doesn't....
    • Floorp 12.15.2 by Razvan Serea Floorp is a cutting-edge web browser that combines the trusted foundation of Mozilla's Firefox with a unique Japanese perspective, offering users an exceptional online experience. This open-source browser prioritizes privacy, customization, and security. Floorp is transparent, with no user tracking or data sharing, and it's completely open source. With a strict no-tracking policy and full transparency, your personal information remains private. As an open-source project, Floorp not only shares its source code but also its build environment, inviting users to contribute and build their unique versions. The regular updates, based on Firefox ESR, ensure that you always have the latest features and security enhancements. Floorp key features: Strong Tracking Protection: Floorp offers robust tracking protection, safeguarding users from malicious tracking and fingerprinting on the web. Flexible Layout: Customize Floorp's layout to your heart's content, including moving the tab bar, hiding the title bar, and more for a personalized browsing experience. Switchable Design: Choose from five distinct designs for the Floorp interface, and even switch between OS-specific designs for a unique look Regular Updates: Based on Firefox ESR, Floorp receives updates every four weeks, ensuring up-to-date security even before Firefox's releases. No User Tracking: Floorp prioritizes user privacy by abstaining from collecting personal information, tracking users, or selling user data, with no affiliations with advertising companies. Completely Open Source: The full source code for Floorp is open to the public, allowing transparency and enabling anyone to explore and build their own version. Dual Sidebar: Floorp features a versatile built-in sidebar for webpanels and browsing tools, making it perfect for multitasking and quick access to bookmarks, history, and websites. Flexible Toolbar & Tab Bar: Customize your browser with Tree Style Tabs, vertical tabs, and bookmark bar modifications, catering to both beginners and experts in customization. User-Centric Web Experience: Floorp prioritizes user privacy and collaboratively blocks harmful trackers. Floorp 12.15.2 changelog: fix: reset tab drag state on dragend to prevent position offset (#2488) by @Ryosuke-Asano in #2497 fix(workspaces): hide split view wrapper when all tabs are hidden by @Ryosuke-Asano in #2495 fix(split-view): prevent stuck pointer-events:none after drag on web content by @Ryosuke-Asano in #2492 feat(design): add Gecko 152 CSS variable aliases and Lepton compatibility layer by @Ryosuke-Asano in #2494 fix(workspaces): exitOnLastTabClose no longer quits Floorp when closing the last tab by @Ryosuke-Asano in #2498 Download: Floorp 64-bit | 95.0 MB (Open Source) Links: Floorp Website | Github Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I can barely recall getting web results from a file search... I must've turned it off long ago. 26H2 is Insider's Preview build 26300.8697, which I am running, atm. It is not available for people running the standard commercial builds of Windows--only for the beta test Insider's group. But anyway, as mentioned in the thread, this feature has been around for a long time...
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      84
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!