Recommended Posts

Hi everyone. I'm having this issue:

http://www.overclock...a-driver-310-54

Windows Update apparently installed the nVidia drivers and now all I see is a constant flicker on my screen, and even my USB devices flicker too.

I tried booting in Safe mode but no matter what I do I can't get into Safe Mode.

I have tried F8 and Shift + F8 and no luck. (Thank you Microsoft, you made it almost impossible to fix the damn issue you caused).

I also tried deleting every file related to nvidia using another installation, removing the card and booting using the integrated card.

Also, I booted from the Win8 Flash drive and used the bcdedit command but everytime i get an error saying the database file couldn't be found.

Anyone has any ideas?

Link to comment
https://www.neowin.net/forum/topic/1136770-windows-8-safe-mode/
Share on other sites

windows + r, msconfig, boot tab, check Safe Boot, reboot.

The whole point of booting in Safe Mode was to get to the Desktop. I couldn't at all.

Anyway... I re-installed Win8. This time I disable automatic updates and added a Safe Mode option to the boot screen just in case I may need it someday.

If windows 8 fails to boot a couple of times, it should automatically enter advanced startup mode and eventually after a huge mess on, it lets you choose safe mode

BIG fail on MS for removing manual safemode

How did you add a safemode option to the boot screen?

The whole point of booting in Safe Mode was to get to the Desktop. I couldn't at all.

Anyway... I re-installed Win8. This time I disable automatic updates and added a Safe Mode option to the boot screen just in case I may need it someday.

Shift - F8 after your BIOS screen gets you into the recovery console.

Then its troubleshoot -> Windows startup setting -> Restart and voila safe mode option.

If windows 8 fails to boot a couple of times, it should automatically enter advanced startup mode and eventually after a huge mess on, it lets you choose safe mode

BIG fail on MS for removing manual safemode

Except they didn't remove it...

Shift - F8 after your BIOS screen gets you into the recovery console.

Then its troubleshoot -> Windows startup setting -> Restart and voila safe mode option.

Except they didn't remove it...

How many times I and many, including OP have tried Shift and F8 to enter safemode / whatever, and nothing happens

EDIT - Just tried again and it just beeps at me for pressing keys then loads windows

How many times I and many, including OP have tried Shift and F8 to enter safemode / whatever, and nothing happens

EDIT - Just tried again and it just beeps at me for pressing keys then loads windows

Hm I just tried it too and it didn't work, maybe they removed it in RTM? It worked in the previous versions :/

If they did really remove it that's idiotic...

Hm I just tried it too and it didn't work, maybe they removed it in RTM? It worked in the previous versions :/

If they did really remove it that's idiotic...

Yep, bad move by MS, fastest way to access it is to force fail the boot a few times by powering off during boot, eventually it thinks there is a problem an loads up the automatic recovery screen, then it forces you to wait while it tries to fix the problem which takes forever, then it says it can't find a problem and gives you the option to enter advanced recovery options which still takes forever and again reboots the machine before allowing safemode options iirc

MS think their customers are retarded and need windows to do everything for them

You can imagine how much fun overclocking is with 8 when you get bluescreens while trying to stabilize your OC, I gave up

Hm I just tried it too and it didn't work, maybe they removed it in RTM? It worked in the previous versions :/

They had a post about it on the Windows blog... saying that they realized they had created a problem then they made Windows 8 boot so fast... Windows 8 booted so fast, it didn't leave enough time to give you the opportunity to press F8.

I think F8 still works, it's just impossible to select it fast enough.

http://blogs.msdn.co...ver-before.aspx

Also interesting:

http://blogs.msdn.co...ot-options.aspx

This actually happened twice to me because of Windows Automatic Updates. Microsoft should have fixed this issue with the drivers a while back. There are a lot of people online complaining about it. I should've known better the second time though.

Not only I was not able to fix it, I lost one of the assignments I was working on for school. Hours of work lost. My fault there though. I thought I had moved my documents folder to another partition but I have searched everywhere and the assignment isn't there. Ugh!!!

So far my experience with Windows 8 has been nothing but pain. However I have been able to find alternatives to some of the things I don't like.

If windows 8 fails to boot a couple of times, it should automatically enter advanced startup mode and eventually after a huge mess on, it lets you choose safe mode

BIG fail on MS for removing manual safemode

How did you add a safemode option to the boot screen?

I did everything I could to make sure the boot process failed, like turning it off, removing the hard drive while it was booting, etc. Nothing made it fail! lol

I added it using this technique:

http://www.eightforums.com/tutorials/2758-safe-mode-add-windows-boot-manager-windows-8-a.html

This actually happened twice to me because of Windows Automatic Updates. Microsoft should have fixed this issue with the drivers a while back. There are a lot of people online complaining about it. I should've known better the second time though.

Not only I was not able to fix it, I lost one of the assignments I was working on for school. Hours of work lost. My fault there though. I thought I had moved my documents folder to another partition but I have searched everywhere and the assignment isn't there. Ugh!!!

So far my experience with Windows 8 has been nothing but pain. However I have been able to find alternatives to some of the things I don't like.

I did everything I could to make sure the boot process failed, like turning it off, removing the hard drive while it was booting, etc. Nothing made it fail! lol

I added it using this technique:

http://www.eightforu...indows-8-a.html

lol, looks like 8 is so clever, it knows when you're trying to fool it

Thanks for the link, I`ll add that myself

EDIT - You should create a separate thread for the safemode boot option, I think it would be popular here

  • 1 month later...

Guys to get safe mode

1,Select PC SETTING from beneath the power off section.

2,Go to GENREAL

3,AT the bottom General there are 3 options to select

OPTIONS:

1.REFRESH WINDOWS (This will delete all your file under WIn8 and make a new install FRESH AND CLEAN)

2,REMOVE EVRYTHING AND FRESH INSTALL (no need to boot off the DVD it does this for you) it will alos not ask you for your cd-key hence why some are only one time use......

3,ADVANCE OPTION (click the restart buton)

When you click restart under Advance OH MYGOD A SAFE MODE OPTION NUMBER 4 oh my gawd....You can also select disable driver signing there to and select to do a system restore or the other 2 options above.PEACE out.

You can also enter Advance Startup by holding the SHIFT while selecting restart from the Charms bar.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Was it too much to ask to show the icon in this article?
    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use this unofficial tweak tool to enable it because it actually isn't available to you yet officially and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Actually, I think even Microsoft doesn't know how to control it
    • OpenAI is making Codex more useful in Chrome and the cloud by Pradeep Viswanathan OpenAI's Codex now has more than 5 million users, up nearly 4x from earlier this year. To further accelerate Codex's growth among developers, OpenAI today announced that it has agreed to acquire Ona, a company that builds secure cloud execution and orchestration technology for developers. Ona will enable developers to run Codex with persistent and controlled cloud infrastructure for long-running agentic workflows. Right now, most Codex execution happens locally on developers' laptops and PCs, and the agents work continuously for hours. Through Ona, OpenAI aims to make Codex agents keep working for days without being tied to a user’s local machine or an active session. This will be an important capability for enterprises that want to deploy AI agents in production while maintaining control over infrastructure, data, security boundaries, credential scope, logging, and review workflows. Like any acquisition, the deal is still subject to customary closing conditions, including regulatory approvals. Until the deal closes, OpenAI and Ona will continue to operate as separate companies. After closing, Ona’s team will join the Codex team to improve developer workflows. Alongside the Ona acquisition announcement, OpenAI today introduced a few Codex updates. Developers can now save Codex rate limit resets and use them later instead of losing them when they are not needed immediately. OpenAI is also adding a referral option where users can invite a friend to Codex and get a saved rate limit reset. OpenAI today also announced a developer mode for browser use in Chrome and the Codex in-app browser. With this mode, Codex can use the Chrome DevTools Protocol to debug web apps, inspect pages, and work more directly with browser-based development workflows. Developers can use this when they want Codex to profile JavaScript, inspect console output and network traffic, examine web page states including the DOM and applied styles, and more.
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      186
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!