Recommended Posts

Hi everyone. I'm having this issue:

http://www.overclock...a-driver-310-54

Windows Update apparently installed the nVidia drivers and now all I see is a constant flicker on my screen, and even my USB devices flicker too.

I tried booting in Safe mode but no matter what I do I can't get into Safe Mode.

I have tried F8 and Shift + F8 and no luck. (Thank you Microsoft, you made it almost impossible to fix the damn issue you caused).

I also tried deleting every file related to nvidia using another installation, removing the card and booting using the integrated card.

Also, I booted from the Win8 Flash drive and used the bcdedit command but everytime i get an error saying the database file couldn't be found.

Anyone has any ideas?

Link to comment
https://www.neowin.net/forum/topic/1136770-windows-8-safe-mode/
Share on other sites

windows + r, msconfig, boot tab, check Safe Boot, reboot.

The whole point of booting in Safe Mode was to get to the Desktop. I couldn't at all.

Anyway... I re-installed Win8. This time I disable automatic updates and added a Safe Mode option to the boot screen just in case I may need it someday.

If windows 8 fails to boot a couple of times, it should automatically enter advanced startup mode and eventually after a huge mess on, it lets you choose safe mode

BIG fail on MS for removing manual safemode

How did you add a safemode option to the boot screen?

The whole point of booting in Safe Mode was to get to the Desktop. I couldn't at all.

Anyway... I re-installed Win8. This time I disable automatic updates and added a Safe Mode option to the boot screen just in case I may need it someday.

Shift - F8 after your BIOS screen gets you into the recovery console.

Then its troubleshoot -> Windows startup setting -> Restart and voila safe mode option.

If windows 8 fails to boot a couple of times, it should automatically enter advanced startup mode and eventually after a huge mess on, it lets you choose safe mode

BIG fail on MS for removing manual safemode

Except they didn't remove it...

Shift - F8 after your BIOS screen gets you into the recovery console.

Then its troubleshoot -> Windows startup setting -> Restart and voila safe mode option.

Except they didn't remove it...

How many times I and many, including OP have tried Shift and F8 to enter safemode / whatever, and nothing happens

EDIT - Just tried again and it just beeps at me for pressing keys then loads windows

How many times I and many, including OP have tried Shift and F8 to enter safemode / whatever, and nothing happens

EDIT - Just tried again and it just beeps at me for pressing keys then loads windows

Hm I just tried it too and it didn't work, maybe they removed it in RTM? It worked in the previous versions :/

If they did really remove it that's idiotic...

Hm I just tried it too and it didn't work, maybe they removed it in RTM? It worked in the previous versions :/

If they did really remove it that's idiotic...

Yep, bad move by MS, fastest way to access it is to force fail the boot a few times by powering off during boot, eventually it thinks there is a problem an loads up the automatic recovery screen, then it forces you to wait while it tries to fix the problem which takes forever, then it says it can't find a problem and gives you the option to enter advanced recovery options which still takes forever and again reboots the machine before allowing safemode options iirc

MS think their customers are retarded and need windows to do everything for them

You can imagine how much fun overclocking is with 8 when you get bluescreens while trying to stabilize your OC, I gave up

Hm I just tried it too and it didn't work, maybe they removed it in RTM? It worked in the previous versions :/

They had a post about it on the Windows blog... saying that they realized they had created a problem then they made Windows 8 boot so fast... Windows 8 booted so fast, it didn't leave enough time to give you the opportunity to press F8.

I think F8 still works, it's just impossible to select it fast enough.

http://blogs.msdn.co...ver-before.aspx

Also interesting:

http://blogs.msdn.co...ot-options.aspx

This actually happened twice to me because of Windows Automatic Updates. Microsoft should have fixed this issue with the drivers a while back. There are a lot of people online complaining about it. I should've known better the second time though.

Not only I was not able to fix it, I lost one of the assignments I was working on for school. Hours of work lost. My fault there though. I thought I had moved my documents folder to another partition but I have searched everywhere and the assignment isn't there. Ugh!!!

So far my experience with Windows 8 has been nothing but pain. However I have been able to find alternatives to some of the things I don't like.

If windows 8 fails to boot a couple of times, it should automatically enter advanced startup mode and eventually after a huge mess on, it lets you choose safe mode

BIG fail on MS for removing manual safemode

How did you add a safemode option to the boot screen?

I did everything I could to make sure the boot process failed, like turning it off, removing the hard drive while it was booting, etc. Nothing made it fail! lol

I added it using this technique:

http://www.eightforums.com/tutorials/2758-safe-mode-add-windows-boot-manager-windows-8-a.html

This actually happened twice to me because of Windows Automatic Updates. Microsoft should have fixed this issue with the drivers a while back. There are a lot of people online complaining about it. I should've known better the second time though.

Not only I was not able to fix it, I lost one of the assignments I was working on for school. Hours of work lost. My fault there though. I thought I had moved my documents folder to another partition but I have searched everywhere and the assignment isn't there. Ugh!!!

So far my experience with Windows 8 has been nothing but pain. However I have been able to find alternatives to some of the things I don't like.

I did everything I could to make sure the boot process failed, like turning it off, removing the hard drive while it was booting, etc. Nothing made it fail! lol

I added it using this technique:

http://www.eightforu...indows-8-a.html

lol, looks like 8 is so clever, it knows when you're trying to fool it

Thanks for the link, I`ll add that myself

EDIT - You should create a separate thread for the safemode boot option, I think it would be popular here

  • 1 month later...

Guys to get safe mode

1,Select PC SETTING from beneath the power off section.

2,Go to GENREAL

3,AT the bottom General there are 3 options to select

OPTIONS:

1.REFRESH WINDOWS (This will delete all your file under WIn8 and make a new install FRESH AND CLEAN)

2,REMOVE EVRYTHING AND FRESH INSTALL (no need to boot off the DVD it does this for you) it will alos not ask you for your cd-key hence why some are only one time use......

3,ADVANCE OPTION (click the restart buton)

When you click restart under Advance OH MYGOD A SAFE MODE OPTION NUMBER 4 oh my gawd....You can also select disable driver signing there to and select to do a system restore or the other 2 options above.PEACE out.

You can also enter Advance Startup by holding the SHIFT while selecting restart from the Charms bar.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Lol I had one of these turn faulty in Jan, guess it wasn't just bad luck lol
    • I'm team Rossmann all the way. I have the exact same NVME, altough not in an array like him.
    • It had gone weeks ago. Although thinking about it I'm on the beta.
    • They thought value of their goods would forever only drop like it used to and didn't account for sudden increase in price because of all the Ai hype. Tough luck Samsung, don't try to weasel this one out. Also American customer protection laws are a**. In Europe, you need to be compensated for a functioning product of same or better characteristics (not same price point as when it was originally bought!) if it can't be repaired and when you receive a replacement product your warranty starts from scratch because you received a different item than you previously had and old warranty thus cannot apply to it anymore. If your actual item was successfully repaired, warranty gets extended for the period the item was in service. If item is repaired to a significant extent, warranty also starts over from scratch because major part of it was replaced. Americans need to fight to get this kind of consumer protections because they are constantly getting screwed over.
    • Microsoft releases new Windows 11 Media Creation Tool with the latest updates by Taras Buria Patch Tuesday updates arrive every month, bringing users new features and security updates. To make sure customers have access to the most recent images, Microsoft also releases updates to the Media Creation Tool app, its official utility for Windows 11 installation. Today, the company pushed new ISOs to Media Creation Tool, allowing you to create images with the June 2026 Patch Tuesday updates. With the latest update, the Media Creation Tool now downloads KB5094126. It is Windows 11 version 25H2, build 26200.8655, which is also available via Windows Update. Note that the app itself remains on the previous version, which you can check in Properties > Details. The only change is that it now downloads a more recent Windows 11 build, so the only way to check is to download an ISO. The June 2026 Patch Tuesday update is a special release for Windows 11, as it brings a new performance profile to make the operating system more responsive and snappier when rendering various user interface surfaces, including the Start menu, quick settings, and more. It does so by spiking processor speeds for a brief moment, resulting in higher loads for a second or two. The so-called “Low latency profile” is rolling out gradually, but you can force-enable it with the ViVeTool app. Other changes include webcam improvements, Task Manager updates, shared audio support, and more. You can download the Media Creation Tool app from the official Microsoft website using this link. Besides MCT, Microsoft lets you download Windows 11 ISO as a file directly from the official Windows 11 website. However, you will need a third-party app to write it to your USB drive. Check out this guide if you want to know how to do that.
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      PsYcHoKiLLa
      184
    3. 3
      +Edouard
      159
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!