Recommended Posts

Back in October I decided to sell my then two-year-old 27-inch iMac (medio 2010) and switch to something more portable. I looked into getting a 15-inch MacBook Pro but after owning one for almost two weeks I decided against it and returned the computer to Apple. I didn't use the notebook as much on-the-go as I expected to at first and found it too bulky to carry around with me all the time. On top of that I really missed the large screen and extra performance, especially when working in Final Cut Pro.

When the late 2012 27-inch iMac went on sale November 30th I immediately ordered one with the following BTO specifications:

  • 3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
  • 8GB 1600MHz DDR3 SDRAM - 2x4GB
  • 1TB Fusion Drive
  • NVIDIA GeForce GTX 680MX 2GB GDDR5
  • Magic Trackpad
  • Apple Wireless Keyboard (English) & User's Guide

I would later add an additional 8 GB of memory to get a total of 16 GB.

img0387kr.jpg

Apple updated the packaging to take up even less space

On January 3, 2013 I finally received my brand new 27-inch iMac. Unfortunately the screen wasn't installed properly, which meant I missed a strip of about three pixels wide on the right and it suffered from extensive backlight bleeding. I called Apple and without any issues the woman on the phone made arrangements for a new iMac. She also offered me ?100 for my troubles. Exactly one week later I received my second 27-inch iMac. I was glad to see it arrived in mint condition without any defects.

Design

imac2010vs2012.jpg

The change between generations is most dramatic when seen from the side

Seen from the front it's hard to tell the difference between the late 2012 iMac and my previous medio 2010 model. In fact the only visual change I could spot was the enlarged FaceTime HD (formerly iSight) camera. When looking at the new iMac from the side the change is quite dramatic. Gone is the fat pizza box-like bezel that held the SuperDrive and SDXC card slots. Instead there's an 5 millimeter thin rim which changes into the curved back. When laying flat on its LCD panel, the eight generation iMac resembles a droplet of water more than it does a full-fledged desktop computer. It's an astonishing feat of engineering really. Like all of Apple's products you can tell a lot of attention to detail went into every aspect of the casing.

imacairintake.jpg

The bottom of the iMac serves as one big intake vent

When Apple first introduced the new iMac a lot of people were concerned about heat and with good reason. During modest usage my medio 2010 27-inch iMac became so hot it was almost impossible to touch the aluminum back for more than a few seconds. I kinda worried about it because I can't imagine that much heat will have a positive impact on the screen and other hardware over the years. The upper left corner was especially bad. I was surprised to see during CPU intensive tasks the new iMac stays surprisingly cool. The entire back becomes lukewarm at best and there are no noticeable hotspots to be detected, suggesting more evenly distributed heat dissipation. This is something I really didn't expect at all from a Mac that has 40% less volume compared to the previous model. All that without loosing performance.

Expandability

imacback.jpg

In the middle you can see the heat dissipation vent with directly underneath it the backdoor for memory slot access

To make the thin design possible Apple had to sacrifice the SuperDrive, which means you can't use optical media without an external drive. Of course it increases the amount of clutter on your desk, kinda defeating the purpose of having an all-in-one desktop computer. The thin case also doesn't leave much room for expendability. With the 27-inch model you get to add additional memory - four slots, hidden behind a small door on the back for up to 32 GB of RAM - but that's pretty much it. So when ordering an iMac be sure not to purely look at what you currently need, but think about the future as well. For me it meant maxing out both the CPU and GPU. Since there's no space on the sides Apple moved the SDXC card slot to the back of the machine. This can be a bit of a hassle at first when trying to change cards, but you'll definitely manage to swap them without crawling behind the screen pretty quickly.

thunderbolttofirewiread.jpg

The adapter tends to run a little bit hot when transferring large amounts of files

The new iMac comes with a SDXC card slot, four USB 3 ports, two Thunderbolt ports, 10/100/1000BASE-T Gigabit Ethernet and a Kensington lock slot. Since Apple got rid of the FireWire 800 ports I had to buy a fairly expensive ?29 Thunderbolt-to-FireWire-adapter to connect my two external LaCie d2 Quadra drives. Having only four USB ports at your disposal can be a bit problematic at times. That said we entered an age where more and more devices and peripherals go wireless. Luckily the new iMac supports 802.11n Wi-Fi wireless networking and has Bluetooth 4.0 build-in.

Performance

aboutthismacf.png

Specifications

When it comes down to overall performance my new iMac is an absolute beast. The Fusion Drive definitely works as advertised and is the perfect middle ground between speed and storage. The operating system and frequently used apps and files are dynamically moved to the 128 GB SSD, while less frequently accessed apps and files are moved to the slower but larger 1 TB HDD. Both drives are merged by OS X into one logical volume, so it's seamless and done completely behind the scenes. You as the end-user won't ever notice it's there. As time goes by the system learns more about your preferences and the Fusion Drive becomes more effective.

harddriveflashstorage.png

Hard Drive and Flash Storage are merged into one logical volume

My new iMac boots within 17 seconds straight to the desktop and all bundled apps, including iPhoto, launch instantly. On a day-to-day basis it's probably the biggest boost in performance compared to my medio 2010 iMac. If you have the money to spare I strongly advice coughing up the extra ?230 for the Fusion Drive. It will definitely be worth it.

screenshot20130217at231.png

Geekbench score

With all my previous Macs I noticed the GPU is the first thing to show its age, so like the last time I decided to get the best chip available. With the NVIDIA GeForce GTX 680MX 2048 MB OS X Mountain Lion runs incredibly smooth. So far I haven't experienced a single lag anywhere, while my previous iMac struggled at times with Mission Control and large amounts of open windows. The 3.4 GHz Intel Core i7 runs like a dream. Especially when editing videos in Final Cut Pro.

Screen

safariw.jpg

The iMac's screen received some hard needed improvements, but don't expect a change as dramatic as with the MacBook Pro with Retina display

Though not "retina" the iMac's screen looks great. Apple definitely made good on their word: because of the new coating the glass front is noticeably less reflective compared to previous models. For a lot of people this was a huge issue ever since Apple introduced the first iMac with glossy screen back in 2007. The new iMac's screen almost seems matte, without sacrificing the vibrant color output. To me that's a major improvement. Due to the full-lamination process there's no longer a gap between the glass and LCD panel. Because of that your iMac won't be prone to getting dust stuck behind the glass plate and it almost seems like images are about to leap off the screen.

imactopleft.jpg

Fully-laminated display instead of a glass plate held in place by magnets

Wrap-up

While the updated design isn't as big of a change as some would have liked, the new iMac's slim body is definitely a head turner. Overall the system is incredibly fast and runs all apps I threw at it without a hiccup. The downsides lie in the lack of expendability and ports, but that's a tradeoff you make with most all-in-one desktop computers. So far the lack of a SuperDrive hasn't bothered me at all. Having to purchase a ?29 Thunderbolt-to-FireWire-adapter just so I could hook up my external drive did annoy me a bit. On the flip side ?29 isn't likely to deprive you of much sleep if you're able to afford this machine.

  • Like 3
Link to comment
https://www.neowin.net/forum/topic/1137036-review-imac-27-inch-late-2012/
Share on other sites

Nice write up.

I also have the same model iMac with maxed out ram. Is the best iMac I've owned. Do wish they'd put more usb ports. I don't miss the superdrive, but did end up buying one cheap on amazon, for those "just in case" moments.

Just apple, please get rid of the jleno chin on the imacs... its been about 7yrs now.

I like the design but these laptop parts are not gonna cut it for builders like myself.

With the 27-inch iMac both the CPU and HDD are desktop-grade. The GPU is mobile though. I don't think the iMac has had a mobile CPU since 2009.

With the 27-inch iMac both the CPU and HDD are desktop-grade. The GPU is mobile though. I don't think the iMac has had a mobile CPU since 2009.

The GPU is also downclocked quite a bit.

I'm not going to nitpick and say this machine won't suffice most of everyone's needs, it's definately more than capable. But my needs require I be able to have full control of what's inside my system.

If I was cooking I'd prob have one as a kitchen unit to look up stuff while I'm prepping up my ingredients or just checking up on something.

But my needs require I be able to have full control of what's inside my system.

Then the iMac definitely isn't for you. :p

Personally I'm done with trying to control every aspect of my computer like I used to. It just isn't needed for me.

Great review. I'd get one if I had the money to spare. I don't really need it, but I've always been a fan of Apple's hardware. The software, on the other hand, is good enough for me but I prefer Windows because of its gaming support. This would be great for productivity though. I could see myself spending time learning how to edit videos and photos with a machine as powerful as that.

Also, dat resolution. Makes my 22" 1680x1050 monitor look like 800x600.

Good review, what about fan noise? If you're stressing the GPU and/or CPU does it get loud?

My old iMac (I think it was mid 2010) used to get ridiculously hot and noisy when you used graphics applications (e.g. Maya), I got it replaced because I thought it was faulty but the replacement was the same so ended up returning it. With faster components and smaller internal space I imagine this would be the same?

Agreed, I don't own anything Apple but the review/story kept me reading to the end

Thanks for the kind words. Since the iMac isn't a completely new product and most here are familiar with it (at least to some degree) I tried limiting my story to what has changed, rather than doing a full report on the iMac and OS X as whole.

Good review, what about fan noise? If you're stressing the GPU and/or CPU does it get loud?

My old iMac (I think it was mid 2010) used to get ridiculously hot and noisy when you used graphics applications (e.g. Maya), I got it replaced because I thought it was faulty but the replacement was the same so ended up returning it. With faster components and smaller internal space I imagine this would be the same?

I covered this in my review: My 2010 iMac became so hot it was almost impossible to touch the back, which apparently is normal for all 2009, 2010 and 2011 iMac models. The 2012 iMac stays much, much cooler. Under stress the back becomes lukewarm at best, nowhere near the blazing furnace the 2010 iMac turns into. Eventually the fan (from what I understand the 2012 iMac only has one) does spin up when using CPU and GPU intensive apps, but it doesn't make as much noice.

  • 2 weeks later...

I bought one of these last week from Best Buy and it indeed fits the bill. I was going to get this from Amazon, but they were temporarily sold out. I had a Amazon Prime account, so I took my invoice to Best Buy and they matched it. That included no tax which would have been about $ 100.00. Very nice set up.... great packaging, and the wireless bluetooth keyboard and mouse it awesome. I went ahead and bought the track pad also since I have a Macbook Air and am used to the gestures. 2560 x 1440 resolution is as crisp as I have ever seen.

This set up does cost some serious change, so I think that a perspective buyer should think about usage over aesthetics when purchasing it. To me, however, it was well worth it!

As a Windows user I'll probably hate myself for saying this but seeing OSX alongside Windows 8 really does feel like a beauty and the beast scenario, and the beast isn't the Apple setup :(

I rather them make it slightly thicker to be able to put a descent video card in it

The 27-inch iMac has the best graphics card of all competing all-in-ones I came across (DELL, Lenovo, HP, Asus). Making the iMac "slightly thicker" probably won't allow it to house desktop-grade graphics to begin with, as demonstrated by previous designs.

As a Windows user I'll probably hate myself for saying this but seeing OSX alongside Windows 8 really does feel like a beauty and the beast scenario, and the beast isn't the Apple setup :(

After using OS X I honestly can't deal with Microsoft's messy interface design anymore. I'm hoping Apple will get rid of the skeuomorphic interface elements in the next major OS X release though.

  • 4 weeks later...
This topic is now closed to further replies.
  • Posts

    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!