HD Webcams! For showing PC Screen?

By +Byt
in Hardware Hangout

 Share

Recommended Posts

Experienced

+Byt Subscriber¹

Posted
  • Subscriber¹
Posted

Hey All,

I have a client that needs a Webcam to work on Skype, so his employees can call him if they get stuck working a special peice of machinery, they can take the webcam over to the machine, and he can see what settings they have put into the control panel of the machine, and talk them through changing it etc, i know this isnt the best system in the world, but its the only thing we can think of that will be doable from his phone when out and about.

I have been looking at this webcam - http://www.amazon.co.uk/Logitech-960-000767-C920-HD-Webcam/dp/B006A2Q81M/ref=sr_1_1?s=computers&ie=UTF8&qid=1361194648&sr=1-1

But it has been so long since a even owned a webcam, i wondered if you video the screen of a CRT monitor with it, will you get them black lines running down the screen? all these old engineering machines use CRT monitors and Windows 95!

Also if the webcams will be ok, can you plug them upto a PC with extra long usb cables? or are wireless webcams good?

Cheers

Link to comment
https://www.neowin.net/forum/topic/1137120-hd-webcams-for-showing-pc-screen/
Share on other sites
Grand Master

Detection

Posted
Posted

I know you're looking for webcams but my 2 cents :)

Remote access might be better than a webcam and probably easier to see on a phone

We used to have HTC Touch Diamond phones at my last IT job and used them for remote access, nightmare on such a small screen but it worked

The black lines could be fixed by setting the webcam to the refresh rate of the CRT I would have thought

Grand Master

LUTZIFER

Posted
Posted

That's the one I have. Absolutely love it. Works awesome. Was the top of the line but Logitech just released a new one, which pretty much looks the same.

New one is Logitech c930e

http://www.logitech.com/en-us/product/webcam-c930e-business?crid=1252

Grand Master

firey

Posted
Posted

It sounds like he wants them to be able to show him what is going on on a piece of machinery not an actual PC, so when he says "Control Panel" he doesn't mean Windows Control Panel. OP can you clarify?

This is what I got from it, was he wanted the ability to take the webcam over to the machine and show parts/physical control that help is needed with, not whats on the computer monitor.

Grand Master

Detection

Posted
Posted

It sounds like he wants them to be able to show him what is going on on a piece of machinery not an actual PC, so when he says "Control Panel" he doesn't mean Windows Control Panel. OP can you clarify?

This is what I got from it, was he wanted the ability to take the webcam over to the machine and show parts/physical control that help is needed with, not whats on the computer monitor.

Quote:

"i wondered if you video the screen of a CRT monitor with it, will you get them black lines running down the screen?"

Grand Master

HawkMan

Posted
Posted

you will always get the scanline on a webcam/video camera from a CRT, even if it's a 100hz screen. du to the collision between the webcams 25/30 fps and the scanlines 100, giving you the slower "wave" down the screen as opposed to a flicker.

Grand Master

Detection

Posted
Posted

you will always get the scanline on a webcam/video camera from a CRT, even if it's a 100hz screen. du to the collision between the webcams 25/30 fps and the scanlines 100, giving you the slower "wave" down the screen as opposed to a flicker.

A lot of webcams have a 50/60Hz flicker fix in the settings, not 100% sure but I always thought that was what it was for, TVs, monitors, etc

Grand Master

xendrome

Posted
Posted

Quote:

"i wondered if you video the screen of a CRT monitor with it, will you get them black lines running down the screen?"

Right I think he wants to see the whole unit, being the controls for the system, the physical control panel, and any CRT screen that is hooked up to the unit that shows it's status/job. Not the actual OS or what is running on the CRT

Grand Master

xendrome

Posted
Posted

Give them all iPhones and use that face thingy :p.

or you know, just Skype on anything :)

I think the problem is, it's probably precision engineering equipment, so details need to be able to be seen. Especially if it's some type of fabrication machine or electronic soldering automated system.

Neowinian

outspoken

Posted
Posted

I don't understand why you _need_ to have a Video camera? I am sure you can send Good quality photos (using a digicam) of the machine's panel and display. Use the Webcam only to show engineers face when talking (so you know he is not lying when he says he did not press the big red button).

Experienced

+Byt Subscriber¹

Posted
  • Author
  • Subscriber¹
Posted

Sorry for the late reply guys, just to clarify...

This old machinery has CRT monitors to control it, but alot of the machinery has DOS commands to control it, or they are using old Win 95 Boxes... They even have spares incase one of the boxes suddenly dies they can just swap it out with a new one! Apparently a new updated version of the software to run on a new PC (Like Windows 7) its over ?20k, and we cant justify that.

So what we need to do, is one of the engineers can skype call the main engineer if he is out of the building, and be able to show him what is going on with the machine, what lights are on the machine at the top, what is showing on the screen, and what the status is of the various water levels etc. The only way we can think of doing this is having a webcam connected to a laptop, which is connected to the network wirelessly, so it can be taken around the building showing the people on the skype call whatever they need to see,

I hope that helps clear it up!

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • What are you listening to?

      By cork1958 · Posted

      OK, back to normal now! Ozzy Osbourne - Flying High Again (Official Music Video)  
    • draw.io Desktop 30.2.4

      By Fleet Command · Posted

      The actual download size is ~130–180 MB, not 100 MB.
    • What are you listening to?

      By cork1958 · Posted

      Big change of pace for me! Gunnar & the Grizzly Boys - Standard American (Official)  
    • draw.io Desktop 30.2.4

      By Copernic · Posted

      draw.io Desktop 30.2.4 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.4 changelog: Uses electron 42.4.1 Updates to draw.io core 30.2.4. Download: draw.io 64-bit | Standalone ~100.0 MB (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will soon allow some users to block Copilot from analyzing their Office files

      By Usama Jawad96 · Posted

      Microsoft will soon allow some users to block Copilot from analyzing their Office files by Usama Jawad Microsoft Purview is a pretty useful data governance, security, and management service that allows customers to gain enhanced visibility and control over their content. It's meant for commercial customers, such as organizations that are storing data at scale. As AI continues to expand and infiltrate every corner of a firm, many are a bit conscious about the technology gaining access to their confidential data. Microsoft is now making a configuration change that will allow such customers to rest easy. Right now, users within an organization have the option to apply Purview sensitivity labels (when available) to secure certain files and label them as such. For example, if you apply the "Confidential" label on an Excel file, the file will be encrypted, and a "confidential" watermark will be applied to it. So, if this file is shared with anyone, they are aware that its access is supposed to be restricted. Up until now, Microsoft was allowing some connected experiences, like its AI services, to analyze files, regardless of their sensitivity label. This is of major concern to most organizations, as a recent example highlighted how confidential emails with data loss prevention (DLP) policies like privacy labels were being uploaded to Copilot for analysis. As such, Microsoft is updating an existing Purview data label sensitivity setting that prevents "some connected experiences that analyze content", from being blocked completely from doing this. The label isn't changing, but the blocking is now being enforced across all connected services (including Copilot and other AI tools), and now extends to Microsoft Word, Excel, and PowerPoint. Files with the label applied already will get this enhancement automatically too once it becomes available. Microsoft has urged IT admins to inform their respective helpdesk and compliance teams, update internal documentation, and review sensitivity labels to ensure that they meet their respective compliance needs. This change is tagged as MC1297982 in the Message Center. General availability is scheduled to begin in a phased manner soon and will complete by the end of next month. That said, it is important to note that this only applies to commercial customers who have a license that allows them to use Purview.

  • Recent Achievements

    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
    • First Post
      BizSAR earned a badge
      First Post

  • Popular Contributors

    1. 1
      +primortal
      590
    2. 2
      +Edouard
      191
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Michael Scrip
      76
    5. 5
      Steven P.
      73
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!