Suggestions for a quieter pc


Recommended Posts

Hi, I need some suggestions on how I can make my pc quieter.

I currently have an earlier revision of the Antec SX630II with 2 80mm fans.

I was thinking about purchasing either the Antec Sonata or the Koolance PC2-601BW (water-cooled) case to replace my current case. Would either of these cases make a significant difference in the amount of noise my pc makes, and if yes, please recommend one if you have any experience with it. Also, how quiet is a watercooled case? Does it eliminate the need for all fans, including the processor fan?

Thanks for your help.

Link to comment
https://www.neowin.net/forum/topic/113714-suggestions-for-a-quieter-pc/
Share on other sites

Actually the processor heatsink fan is barely making any noise at all, it's definitely the 80mm fans that are the problem. They are the Antec fans that came with the case.

How old are these?

They shouldn't be making THAT much noise..?

i have three antec fans in my case and they are pretty loud.you could always invest in a rheobus that controls the fan speed of the fans hooked up to it by decreasing or increasing voltage to the fan. or get temperature controlled fans.you could try noise dampening kits which are pretty much sound absorbers that are soft you put in your case.for water cooling there is still a fan and pump that makes noise but it is probably quieter than your current case. :)

Ok, I'm starting to think that maybe the most cost-effective way would be to just replace my fans with ultra-quiet fans, no matter how much I would like a nice black case. :)

So, what are some fans that are regarded as ultra-quiet yet provide adequate cooling?

ooh, i'm looking to quiet my pc too. i think the 70mm cpu fan is too small, so i might put a bigger (lower rpm) fan on it.

for quiet fans, there's panaflo, vantec stealth, etc. not sure how good they are, though, so maybe people can give some opinions. i'm looking for a quiet led fan.

Ok, I'm starting to think that maybe the most cost-effective way would be to just replace my fans with ultra-quiet fans, no matter how much I would like a nice black case. :)

So, what are some fans that are regarded as ultra-quiet yet provide adequate cooling?

Vantec Steatth Fans. Low rpm, high CFM. Very Quiet.

Panaflo fans also very very quiet and great CFM.

Either will do.

Note, the Antec Sonata is a Ok case, and has a large 120mm fan in the rear and a option to have one in the front.

From the reviews i read, temps rose in it a tiny bit. Just to let you know, temps will rise in low flow quiet cases.

I have a Coolermaster Wavemaster and the thing is damn quiet with the above mentioned fans. Temps are fine on it, even considerig im using a Palemino Athlon(runs hotter)

hehe....haven't you ever thought to remove the fan?

My case runs a little on the warm side even with the fans, so I can't just take one or both out.

Anyway, I've decided to purchase a few Panaflo L1A fans, so thanks to everyone who had suggestions.

quiet fans work fine on your cpu heatsink, just make sure your heatsink is good. to give you an idea, i am currently running a panaflo L1A fan on an SLK-800U. the fan is virtually silent from a meter away with the case on.

at 1.87 volts on my cpu, it idles at around 46 deg C. but if i have 1.675 volts on my cpu, then it idles around 36 deg C. ambient room temperature is 24 deg C.

i would say get the sonata, i have one. its quiet. 120 mm fans are better because they move more air at lower rpms (lower rpms = less noise).

www.silentpcreview.com for the crazy modders who make their PC dead silent u can hear a pin drop.

can we put those quiet fans on top of cpu heatsinks? i mean, they're both fans, so i don't see why it should be any different so long as the cfm is at least as good.

Yes you can.

Im currently using a 2400rpm Ceradyna Ceramic Silent fan with moderate 28cfm as its close to summer here.

In winter i would change to a lower RPM CFM fan.

Just remember, temps may rise slightly when using these sorts of fans.

sweet.  i mean, they're both fans, so i figured they should be the same.  what differences, if any, are there?

i'll need to make some adapter or something to get the 80mm fan to fit, though.

You can but adapters these days.

Like 80mm Fan to 60mm heatsink adapters

Even 80mm Fan to 70 mm heatsink adapter.

Or you can mod it yourself.

Edited by Davey

how do you measure the fan size? i always thought it was from the center of the hole to the center of the other on one side (not the diagonal), but then my friend said that it's from edge to edge.

if i have a 70mm fan, it's going to be hard to find 70 to 80mm adapters.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
    • And with SO much better perf than the laggy mess that is Files.
    • BrowserOS 0.46.0 by Razvan Serea BrowserOS is a free, open-source Chromium-based browser that runs AI agents natively, offering a smarter, more productive browsing experience. It supports Chrome extensions and integrates AI agents to automate tasks, fill forms, and streamline workflows. Your data stays on your computer: you can use your own API keys or run local models via Ollama, making it a privacy-first alternative to tools like Perplexity, Comet, or Dia. With built-in productivity tools and app integrations, BrowserOS boosts efficiency while keeping control firmly in your hands. Being Chromium-based, BrowserOS lets you effortlessly import your bookmarks, passwords, and Chrome extensions in just a few clicks. BrowserOS works with OpenAI GPT models, Anthropic Claude, Google Gemini, and local AI models via Ollama or LMStudio. You can use your own API keys and effortlessly switch between providers. BrowserOS Agent Your AI productivity assistant that organizes and manages your browsing effortlessly Quickly list, group, or close tabs Save and resume browsing sessions Search your history and organize bookmarks Switch instantly to the tab you need BrowserOS Navigator – Automate web tasks with ease Navigate websites and search automatically Interact with pages without manual effort Handle repetitive tasks in seconds What makes BrowserOS special Feels like home - same familiar interface as Google Chrome, works with all your extensions AI agents that run on YOUR browser, not in the cloud Privacy first - bring your own keys or use local models with Ollama. Your browsing history stays on your computer Open source and community driven - see exactly what's happening under the hood MCP store to one-click install popular MCPs and use them directly in the browser bar (coming soon) Built-in AI ad blocker that works across more scenarios! BrowserOS 0.46.0 changelog: Run Claude Code & Codex right in your browser — We've extended the agent harness to bring full coding agents into BrowserOS. Claude Code and Codex now come bundled and plug straight into the assistant, so you can drive your browser with the agent — and the subscription — you already use. A brand new experience — A redesigned new tab, a calmer composer, and a rebuilt command center for switching between agents. The whole assistant is cleaner, faster to reach, and easier to live in. New MCP tools — We rebuilt the browser tool surface from the ground up — a tighter, more reliable set of tools for agents to drive the browser. Plus one-click install of BrowserOS as an MCP server into the agents you already run, with automatic URL sync. Chromium 148 — Updated to the latest Chromium base with all recent upstream fixes and security patches. Streamlined — We've pulled back a few features that weren't getting much use — Skills, Soul, and Memory — so we can focus and ship better versions of them soon. Download: BrowserOS 0.46.0 | 181.0 MB (Open Source) Download: BrowserOS for macOS | 485.0 MB Links: BrowserOS Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      BizSAR earned a badge
      First Post
    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      598
    2. 2
      +Edouard
      190
    3. 3
      PsYcHoKiLLa
      80
    4. 4
      Michael Scrip
      76
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!