• 0

Need help with a program for downloading video and converting


Question

Hi, Dr. Oz last week on his show showed off some products that are made by the company I work for.

I went to his website and using the program Freemake Video Downloader copied the URL and pasted but it always says Not Supported Website.

I have always been able to use this fine program for video download and conversion. Now I cant.

Here is the link: http://www.doctoroz.com/episode/dr-oz-answers-your-most-awkward-questions-all-time?video=17035

It would help us if we had this video to show off and show consumers that even Dr. Oz uses Sweat Protection.

If there is a better alternative for downloading video and converting please let me know..

Thank you

17 answers to this question

Recommended Posts

  • 0

EDIT: I am able to get this video just fine, as I post, converting it to mpeg format. 3.2.1 version of Freemake video converter.

What is the format ?

Do you have the latest version of Freemake program ? (there was an Update in January 2013)

There are other versions at Freemake to d/l videos also.

http://www.freemake.com/

  • 0

Ghostery blocks the video and looking at the page source it seems it has some advert from http://ad.doubleclick.net - could be you are telling your downloader to grab the ad before the video ?

EDIT - Even the tracking blockers in IE block it

  • 0

Thanks for quick reply. The format of the video is unknown. I assume flash based video.

Detection you may be correct but I don't know for sure. All I have done is paste the url as is: http://www.doctoroz.com/episode/dr-oz-answers-your-most-awkward-questions-all-time?video=17035

I have Freemake 2.2.0.3

It seems I am very behind. More than a version just downloading now..

  • 0
  On 19/02/2013 at 16:04, flynempire said:

Thanks for quick reply. The format of the video is unknown. I assume flash based video.

Detection you may be correct but I don't know for sure. All I have done is paste the url as is: http://www.doctoroz....ime?video=17035

I have Freemake 2.2.0.3

It seems I am very behind. More than a version just downloading now..

I've looked through the page source and I can only find URLs starting with the ad.doubleclick

If you want to check it yourself, right click the page and choose 'View Source' or 'View Page Source' - you might spot the actual video URL if I've missed it

I've done a search for .flv, .swf, .avi, .mp4, .mpg, etc etc and the searcher can not find any of them

  • 0

I installed the latest version of Freemake and now there is no error. It just asks to play the video and then it will try to download but no such luck yet.

Thanks for your help though. I appreciate it

  • 0

How did you do it? I was looking in youtube to see if the video was there but had no luck

  • 0

Tried that also and no luck.. Will try the download manager

  • 0

Have a clean (unmodified) HOSTS file and a clean (no extensions) Firefox.

Install:

https://addons.mozilla.org/en-US/firefox/addon/video-downloadhelper/

If it doesn't pick it up, just use a screen capture program (CamStudio, Camtasia, SnagIt and so on) and capture it.

  • 0
  On 19/02/2013 at 16:15, flynempire said:

How did you do it? I was looking in youtube to see if the video was there but had no luck

I used that URL, and pasted it, clicking on the paste URL button.

http://www.doctoroz.com/episode/dr-oz-answers-your-most-awkward-questions-all-time?video=17035

The rest was automatic.

Are you in the USA ?

I am on Firefox, if that makes a difference.

  • 0
  On 19/02/2013 at 16:16, Copernic said:

Internet Download Manager can download anything from any website.

http://www.neowin.ne...ger-615-build-2

doesn't download webex streamed content that plays in a webex player. Need a screen capture program that can do video like snagit.

  • 0

I am in USA. Will try the Firefox suggestion also as well as the screen capture tools.

Thanks again to everyone for the fast replies. Got to love Neowin

  • 0

Just wanted to post one last time on this topic. Thanks to all that suggested and helped me.

The Firefox plugin and Snagit were the ones that worked. The plugin works but the file size is very big so in the end I used Snagit which is fantastic software. Small size and works just right. I then imported into Camtasia and proceeded to customize it. Very cool software indeed. Will probably post the video sometime today

This topic is now closed to further replies.
  • Posts

    • Wouldn’t it be better to disable global c states to improve latency at the cost of marginally higher heat and power usage?
    • I recently bought a brand new Intel 200 series laptop with 16GB, 512GB NVME (now 2TB) with 14 inch OLED screen for $450. Not the fastest laptop in the world, but the screen is great and laptop is small, just what I needed.
    • They forgot to include this slide: "If I get a Mac I won't be able to play games, therefore I will have more time for my studies."
    • It’s not desperation, it’s marketing. Companies do that…
    • Some AMD Ryzen users can get free Windows performance boost with this simple system tweak by Sayan Sen AMD understands that there is a lot of demand for its X3D processors and for good reason too, since they offer some of the best gaming experiences. As such, the company plans to launch a new 6-core Ryzen 5 9600X3D for those who may not want to spend top dollar on a 9800X3D. What makes X3D special is the densely packed last level cache (LLC) wherein the L3 (level 3) cache is 3D die-stacked such that there is a whole lot of it that the cores can access on demand all within the smallest footprint. This is said to help with latency especially, and games happen to be quite sensitive to it since they are a mixed workload and so there is a lot of to-and-fro. However, despite that fact, users have noticed micro-stuttering and freezes on Ryzen X3D CPUs. Although there is no official fix, some of the affected users have managed to resolve the issues by tweaking a motherboard setting. The tweak is related to a setting called "GLOBAL C-STATE CONTROL" (it may be called something else by your motherboard vendor) and changing it to 'Enabled' from 'Auto' could fix stuttering and lag-related issues in games. If you are not familiar with them, Processor Power Management is done through Advanced Configuration and Power Interface (ACPI) P-states or C-states. While P-states or performance states handle CPU voltage-frequency scaling, C-states deal with CPU sleep states so that some of the CPU functions, which are not necessary at that moment, are disabled. The P-states and C-states work together to make the processor run more efficiently. It helps the OS and apps determine which cores can be parked. The Global C-state control setting helps users manage not only the DF and CPU core C-states but also the I/O C-states too. For those wondering, DF here refers to Data Fabric or AMD's high bandwidth Infinity Fabric interconnect between CPUs, GPUs, and more, on AMD systems. By default, this is set to "Auto" which also means that it is "Enabled" by default. However, in the case of X3D parts, Auto may set this setting to "Disabled" and thus manually toggling it to "Enabled" may be necessary. X3D processors, the dual CCD (core complex die) ones especially, have their V-cache on a single CCD. If the CPPC (Collaborative Processor Performance Control), which lets an OS like Windows control the "preferred core" and clock speed boost, isn't working optimally to assign the correct gaming CCD, then this fix could well work. Global C-State Auto: Global C-State Enabled: We ran a benchmark on our Ryzen 9 9950X3D to see if toggling the settings would make a difference, and well, it didn't in the case of AIDA64. However, since this is a synthetic test that measures cache and memory exclusively, we can't definitively conclude that the fix will also not make a difference in the case of games. Another remedy for stuttering is to disable the monitoring of the "Power percent" metric on MSI Afterburner if you have it on. This has been a long-known issue and in fact can help you even if you are not using an X3D CPU. Source: Reddit (link1, link2) via YouTube
  • Recent Achievements

    • One Month Later
      DecaffKnight94 earned a badge
      One Month Later
    • Dedicated
      S.P earned a badge
      Dedicated
    • One Month Later
      adxnksd42031 earned a badge
      One Month Later
    • Rising Star
      aphanic went up a rank
      Rising Star
    • Contributor
      GravityDead went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      663
    2. 2
      ATLien_0
      260
    3. 3
      Michael Scrip
      234
    4. 4
      Steven P.
      157
    5. 5
      +FloatingFatMan
      151
  • Tell a friend

    Love Neowin? Tell a friend!