Successfully Managed to Remove RAID0


Recommended Posts

Hi Guys,

I've experienced a problem on my PC recently.

I have a Dell XPS420 and towards the end of last summer the PC started to crash, screen would go black, and one of the fans sped up inside really quickly, until i rebooted, and the fan would come on slowly again, and then eventually the same thing would reoccur.

I removed the side panel, blew out the inside with compressed air, downloaded the latest driver for my Geforce 8600GT video card and as soon as i downloaded the driver the fan speed sped up without it crashing, i reformatted the hard drive, reinstalled Windows, and all was fine until two days ago.

The same thing happened again two days ago, first the operating system locked up, and the Windows bar at the bottom of the desk top screen changed colour (went white) then the screen started locking up, then it went blank, the fan sped up, i tried downloading the driver for the graphics card again, but didn't work this time.

I therefore purchased a new video card yesterday, the Geforce 630 with a massive fan ontop of it, installed that last night, but the operating system was playing up big time, i couldn't install the drivers for the video card, tried the enclosed CD Rom, even online, everything i tried to do on the Pc wouldn't work, even right clicking on the desk top and choosing 'personalise' came up with errors, Google Chrome wouldn't open, i couldn't even right click 'my computer' to try and get into Device Manager, as it told me that Windows Explorer could not open or something to that effect!

The whole thing was running slow, even though i'm running Vista on a Quad Core Intel with 4GB Ram (i know Vista can only use 3GB).

It was even doing a religious CHKDSK on every reboot!

So, i went for a fresh install of Windows, using the installation CD, all sorted i thought, until it loaded for the first time and told me straight away on the login screen it came up with some error box telling me that the user account control file or something is corrupt! This was a fresh install!

So, i'm now thinking hard drive problems, so thought about replacing the hard drives and removing the dreaded RAID 0 whlist i was at it, thought i would experiment with the old drives whilst removing the RAID0 and then if i can do it, then buy 2 x new hard drives once done.

Managed to remove the RAID0 volume from within the RAID BIOS screen (CTRL & I) and then set the hard drives to ATA in BIOS, then reformatted both hard drives using the Vista installation CD, and all reinstalled fine and i now have 2 x 300GB separate hard drives showing in Windows Explorer (happy days !)

The hard drives and the PC all seem to be working brilliantly now, but do you reckon i could still have bad hard drives?

I'm running a CHKDSK now but it seems to be taking a lot longer now they are no longer RAID0.....

Also, its been so long since i've not had RAID0 set up, how would you use the 2 seperate hard drives?

I was thinking having 1 of the drives just for the operating system and program files, and the other hard drive for my media, i have about 180GB of media consisting of photos, videos etc., and if i wanted to replace that hard drive for media with a 1TB drive would that be easy enough to do if i keep it seperate to the program and operating system drive?

"The hard drives and the PC all seem to be working brilliantly now, but do you reckon i could still have bad hard drives?"

Yes. If something is going wrong with your RAID then either you have crappy drives or crappy controlling hardware/software. If you remove the RAID and still get problems either one or both of the hard drives are bad and need to be RMA'd. Run the manufacturer's utility to check the condition of the drives.

Guess What? Just as well i havent loaded anything onto these drives yet, as Windows is starting to mess up again.

I started to load MS Office 2007 from a CD, it was taking forever to open one of the files on the CD, the progress bar at the top of the screen kept creeping along slowly, and then it froze, i tried a Ctrl Al Del and it said its not responding....

Then it came up with something about System Login Security failed........

Do you reckon its the drives? Have i done anything wrong do you think?

They are Western Digital Drives, just about to see if i can download there diagnostics checker.

Edit: Would welcome as much input and assistance as i can get, as can't really afford another PC, and this was a great PC for a good few years.

Check the SMART on those drives, that should be the first thing you should do. Also see if the event viewer has any disk error / warnings on it. Also RAID 0? really?

Hi Mate, i'm not all that clued up, what does that mean?

Yes they were def RAID 0.

I've just tried to download the Western Digital disk checker here

http://support.wdc.com/product/download.asp?groupid=606&sid=3

Extract, run, and it comes up with 'unable to execute file' 'Create process failed code 740, the requested operation requires elevation?

Just managed to run Western Digital Data Lifeguard Diagnostics - DLGDIAG for Windows and run a quick test on both drives and it came back as a Pass.

Ran a quick Smart test on each drive and it placed a green tick in each drive saying 'Smart Status' Pass.

Any other ideas what could be wrong?

Hi Mate, i'm not all that clued up, what does that mean?

Yes they were def RAID 0.

I've just tried to download the Western Digital disk checker here

http://support.wdc.c...oupid=606&sid=3

Extract, run, and it comes up with 'unable to execute file' 'Create process failed code 740, the requested operation requires elevation?

run as administrator that app (right click on the exe and chose "run as administrator"); also try HD Tune http://www.hdtune.com/download.html to view the SMART table on the disks; S.M.A.R.T. or Self-Monitoring, Analysis and Reporting Technology, is a technology that every modern HDD has; it holds lots of info about the HDD, like temperature, spin time, reallocated sectors count and more; you can see lots of attributes here http://en.wikipedia.org/wiki/S.M.A.R.T.#Known_ATA_S.M.A.R.T._attributes. Also there are lots of programs that check the SMART table and report in a easy way if the HDD is good or is damaged.

Ok so ive now peeformed Extended tests on both drives and they said they completed succesfully using the Western Digital diag tool that I posted above and the SMART has passed.

So they cant be damaged then?

Anything else can be slowing it down and causing hangs and error messages after a reformat?

Shall I start another thread?

Take the drive(s) out, try them in radically different hardware and see if the same problem occurs.

If no problem -> your motherboard or drive controller (if not on the motherboard) or RAM or PSU is dodgy.

If same problem -> your drives are failing.

... also try HD Tune http://www.hdtune.com/download.html to view the SMART table on the disks; S.M.A.R.T. or Self-Monitoring, Analysis and Reporting Technology,

I'd second this over running the SMART app from Western Digital. I had a 2TB WD disk causing issues in windows. Windows logs indicated it had issues writing to the drive (a lot or retries). Running the WD app showed the SMART as a pass. Running HDtune showed a fail. I returned the drive to WD for RMA.

Thanks N k And Jason, ill try that Hd Tune on the drives.

Also, re swapping out the drives into another pc is it as simple as disconnecting from my faulty pc and installing into another? I have an old Packard Bell running XP, if I swap the drive out to the XP machine will that XP Machine boot straight into Vista (which is on the troublesome pc) ?

HI Guys,

Might have had a breakthrough, although a confusing one at that....

As mentioned above, i performed a quick test via Western Digital dianostic test and each drive returned fine.

Then last night before going to bed, i did a longer 'extended' test and Drive 1 (operating system) (think the operating systems on that one as don't know if WD number them differently) and when i got up this morning it past, then when i went out to work this morning i started the 'extended' test on Drive 2, and just got in from work and it said 'stopped - too many bad sectors'!!!

But its on Drive No.2 and i'm almost sure its Drive 1 that the operating system is installed on...

I'm just about to download HDTune and run that as suggested,

Bad sectors on any drive can cause crashes, especially if they send bad data to the disk controller. If you open event viewer and look under system you'll probably see some error messages indicated that there were paging errors and / or delayed write failures.

Downloaded HDTune and could only test 1 drive as was only showing 1 in the drop down box, run the test on that drive and it found something cant now remember what as I was confused as wanted to know why it wouldnt show the other drive so went into explorer and the other drive isnt even showing now!!

To summarise, both drives were showing in explorer as I remember saving a notepad file to the d drive (drive 2) once I removed the raid 0 to make sure it worked.

So I then restarted the pc to see if it would show and the pc wont even boot now!

Came up with an error in the flash/dos screen that no boot device can be found or something.

Could that WD diagnostic test have killed the drive completely?

Edit said 'drive 1 not found serial ata sata1 Alert! Failed to detect one or more drives during post strike f1 key to continue f2 to run the setup utlity press f5 to run onboard diagnostics.

So well and truly knackered them drives!

Can those diagnostic tools finish off a poorly drive?

Yes they can but only really if the drive is inheritly bad anyway, i.e. running a diagnostic isn't going to make a drive that fine have mostly bad sectors.

Either RMA the drives if they're within warranty or sell the spares if not or whatnot.

And don't listen to people moaning about RAID0, it does what it's meant to. If you store all your mega important files on a RAID0 then yes, you're an idiot, but if you use RAID0 for what it's meant for (a boot OS drive only with applications/games) then that's fine.

And don't listen to people moaning about RAID0, it does what it's meant to. If you store all your mega important files on a RAID0 then yes, you're an idiot, but if you use RAID0 for what it's meant for (a boot OS drive only with applications/games) then that's fine.

it's not moaning, RAID 0 is fine for what is meant for (performance); the problem is i never saw a RAID 0 configuration purposely made with the perception of the disadvantages in mind, ever; all the RAID 0 configs is saw was in the aftermath of a single HDD failure (meaning the array was gone), with important data going bye bye; much safer is RAID 10.

lol it's not moaning :rofl:

RAID 10 needs 4 drives and you might as well RAID 5/6 them instead, plus this is all being done using your system CPU, so it'll run much slower than a software RAID 0.

I've got a RAID 0 setup for my arch box, it's not my main device and if the drive/array failed then yeah I'd lose some things but nothing of importance.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I recently tried edge. It seems a lot better. A lot of the junk in it is gone. It seems less bloated and snappy.
    • Lethal fake phone chargers are still being sold on Amazon and eBay, UK watchdog warns by Paul Hill Credit: Pexels The UK consumer rights organization, Which?, is claiming that “potentially lethal knock-off chargers” are still being sold on online marketplaces seven years after it exposed the danger of these chargers. In its latest investigation, it bought 15 USB phone chargers from several online marketplaces and found they were missing key information, meaning they cannot be legally sold in the UK. Which? bought the 15 chargers from seven online marketplaces. These were Amazon (including Amazon Haul), AliExpress, B&Q Marketplace, Debenhams Marketplace, and eBay. It said that the chargers were so badly made that anyone using them was at risk of electric shock. Over half the chargers also posed fire and explosion risks. Of the chargers purchased, one was a fake Apple USB-C 35W power adaptor charger. To confuse buyers, the box was branded with an Apple logo, but testing found it to be a fake. Further testing picked up arcing sounds after 10 seconds of use, where a current jumps between two parts of the electrical circuit, which can cause fires, explosions, or electric shock. The manufacturers of this particular charger also put modeling clay inside it to make it feel more weighty, robust, and genuine. Not all of the chargers were technically faulty; however, some were missing key packaging, markings, and documentation, meaning they can’t be sold in the UK legally. Which? said that it is now campaigning alongside a coalition of safety groups and businesses for new laws that make online marketplaces responsible for ensuring the safety of products that they choose to list on their websites. It also said the government needs to start using powers under the Product Regulation and Metrology Act, which was adopted last July, to impose safety requirements on online marketplaces via secondary legislation, but so far, there have been delays. No matter what country you are in, be sure to properly research what you are buying and only buy authentic chargers to prevent fires. You can read more about Which?’s research here.
    • Visual Studio finally gets long-awaited feature that developers will love by Usama Jawad Visual Studio Code is Microsoft's popular, lightweight, open-source code editor, it is actually Visual Studio that is the company's flagship integrated development environment (IDE). Although the IDE already offers a boatload of useful features for developers, Microsoft has finally introduced a long-requested capability that will be loved by many. While developers have already been able to create Git pull requests (PRs) directly within Visual Studio for the past couple of years, it had not been possible to review a PR without switching to the browser, until now. Microsoft revealed in December 2025 that it is working on UX that enables developers to do just that, and fast-forward to June 2026, and Visual Studio finally has native capabilities to open and inspect a PR, discuss feedback, and wrap up the review, all without switching to the browser. This integration works for both GitHub and Azure DevOps (including on-prem). Developers have access to multiple surfaces to open a PR, including Git Repository, Git Changes, and the Git menu in Visual Studio. Once you open a PR, all the important details will be immediately visible to you, from where you can navigate to various levels of granularity and branch states, depending on the reviews that you are engaged in. As you would expect, you also get a diff view that enables you to see code changes inline or side-by-side in a separate panel. You can also review commit-by-commit. Additionally, this UX fosters collaboration as you can leave comments, reply to threads, and resolve conversations easily. Naturally, you can also leverage Copilot to apply a code suggestion to fix a potential issue. When you are done, you have the ability to approve, complete, and merge the PR. This is a pretty major feature as it has been requested heavily for the past few years. You can try it out in Visual Studio 2026 version 18.7, made available here recently. Microsoft plans to enhance this experience further in future releases with comment filtering, a timeline of PR activity, and more.
    • This AdGuard Family lifetime deal is still only $15.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 90% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $15.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $15.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • the MCT currently downloads 26200.8653, so not completely up to date.
  • Recent Achievements

    • Week One Done
      Timaximus earned a badge
      Week One Done
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
    • Week One Done
      davidbazooked earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      PsYcHoKiLLa
      175
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!