Windows 7 - No sound when playing a DVD....


Recommended Posts

sadly on my mediacenter i am forced to use windows instead of linux. and its the real crap. fails to do such basic things like plaiyng the SOUND on a dvd.

- acer ferrari 5000 notebook

- clean, fresh installation of win 7

- it plays sound files and movie files just fine, also DVDs but no sound!

- works like a charm in vlc so the hardware and drivers are fine

- i need to have it working in mediacenter which, just like mediaplayer, fails

- installed sharky win7 codec pack for divx support etc.

- still no luck with sound on dvd

- installed another codec pack. same problem.

- i set the dvd region to europe (it was not set at all first)

- i rebooted several times

- no luck

i since years thought that windows is just trash and it got confirmed. why is it that today every simple linux distribution, with only a few users behind it, can do the basic tasks of a computer/pc system MUCH better than windooze?

you know i googled the problem and i am not the only one with this ****... all they said was try install a codec pack.

why do i even need to install a codec pack (with all these ugly toolbars and trojans etc.) for such basic things?

no wonder everyone is pirating that **** OS.

any ideas?

As far as I'm aware VLC comes with its own codecs, so could be a codec problem if it is playing in that but not others

Also, try k-lite, apparently it doesnt have spam etc anymore like it used to:

http://www.free-codecs.com/download/k_lite_codec_pack.htm

I don't see your model supported under Windows 7 on Acer

Edit Ignore me I was looking at the wrong site.

the older drivers work fine in win7, also afaik last time i used win7 on my notebook (few years back) the sound output on dvd was working.

anyway. its a basic task. nothing you need complicated drivers for. the fact that vlc works shows just how **** windows is. if any linux distro would give working sound output via hdmi i would switch immediately.

Codec-wise, I use FFDShow tryout played through MPC-HC. I have no problems playing any file format.

Did you also install Cyberlink PowerDVD, it includes an MPEG-2 decoder. What version of Windows 7 is installed?

Well if memory serves Windows don't support certain video or audio playback codecs which may have been because of proprietary licenses,hence the requirement to install codec packs such as K-Lite and the revenue gained from the end user buying a codec pack from them.

Very strange if you've tried all those codec packs and none are working.

Here's answers I found elsewhere...

Hi,

1. Was it playing fine earlier?

2. Have you tried playing the DVD's in another computer?

3. Does the issue occur on all the DVD's?

Please follow the steps mentioned below.

Step 1:

In Windows Media Player,

a. Click Tools > Options > Devices > Click on DVD and select Properties.

b. Make sure that Playback and Rip are set to Digital.

Step 2:

This issue can be caused by incompatible Codec. I suggest that you remove/uninstall all the installed third party Codec packs, players or video record programs.

---

So I'd try uninstalling all codec packs, restart, install k-lite

wow epic breakthrough here :woot:

i found that i can at least bring windows media player to play the soud via the internal speakers. :rolleyes:

post-21849-0-83912300-1361708932.jpg

- i chose the first entry no sound is played

- i chose digitalaudio hd audio .. nothing

- i chose speakers (3rd entry) ... sound output via the laptop speakers. i think i dont have to add that this is no option for a media center.

the over 100mb download of cyberlink powerdvd has finished now and i will install that. if it works i can at least have 30 days of sound output. how progressive. did i already mention that microsoft is trash?

no sound output via powerdvd either.....

but at least 20 new nag-screens asking me to register somewhere. :/

cant be such a big task to have simple sound output working on a dvd...... (btw. dvd is standard with vob files ...)

more ****

post-21849-0-24708800-1361711351.jpg

i had there speakers as well and tried some settings, also thought lets try deactivate them, now they are gone and i cant get them back anymore! also not in system settings. they are just gone......... windows behaves like a virus no joke.

any ideas except more trashy codec packs?

this is so damn annoying. i plan to buy me a htpc but i wont do this until i can be completely sure that at least basic things like sound output works, otherwise i wont waste my money. damn, these things are now mainstream since how many years? 5? and still so many bugs and ****. i would not and will never ever waste a single cent on a microsoft product anymore. :angry: :angry: :angry: :angry: :angry:

Hang on your getting confusing.What ere you trying to play the audio back on thats not working as one sentence mentions internal speakers and another something else?

If you have some other hardware attached did you check device manager to ensure its installed correctly?

If you hit the test button [bottom left] you should get this screen to test the speaker out put

9ecf0a43d0914181a6d6c1fae8e04bf3.png

Hang on your getting confusing.What ere you trying to play the audio back on thats not working as one sentence mentions internal speakers and another something else?

on that pic above i had below the S/PDIF digital audio also a point which said digital audio speakers (afaik it was called that way).

i double clicked on it and tried some settings to make the dvd sound output working in media player. no success. one setting was to deactivate the speakers . i thought it was like you deactivate something in the system settings where it gets deactivated but you can activate it later on again. but not here! its not there anymore. gone forever it seems. also not back after a reboot or scanning for new hardware.

Btw what's up with using VLC if that's working fine?

that this notebook is my provisional media center right now and placed below my tv. i dont want to go down there and open it, close the media center, and open vlc, anytime i wanna watch a dvd. i think thats also not the intention why someone would wanna use a media-center.

i really need to have these basic stuff working before investing money in a htpc. otherwise i will stay in front of my pc and watch the dvds there. on linux of course.

The problem is not Microsoft, it's something to do with your setup. Windows can handle DVD's just fine, and you don't need third party codecs for it, the decoder should be included, I know it is with Ultimate.

The problem is not Microsoft, it's something to do with your setup. Windows can handle DVD's just fine, and you don't need third party codecs for it, the decoder should be included, I know it is with Ultimate.

it has nothing to do with my setup. i dont use exotic hardware nor special drivers or whatever.

the fact that media player classic and vlc both give the correct sound output shows that everything works how it should.

its something with microsofts windows media player. i am fed up hearing that something is wrong with the hardware or setup when clearly its not.

also it cant be such a difficult task to bring the sound via hdmi cable to the receiver. vlc does it. mpc does it as well. and probably every ****ty player arround there too. only microsofts does not. also the problem is often bespoken arround the web. so i am not the only one. however there is no clear solution for it.

Right click the device in your image and select show disabled devices from the drop down menu

4af3fe4d60e269cd4a8fb61c7e0d8280.png

thanks a lot that brought it back.

ok by now i dont have any soud output anymore. all i did was installing the latest ffdshow.

but now no sound output. the equalizer shows that there must be some sound but i dont hear anything .....

i will install now every codec pack i find (without uninstalling the previous one - like i did earlier) as i cant get any worse than this.

If you hit the test button [bottom left] you should get this screen to test the speaker out put

9ecf0a43d0914181a6d6c1fae8e04bf3.png

you came as close as it gets!!!

thanks to that hint i solved the problem, however i still dont uderstand it completely.

- i installed k lite codec pack again, it found ffdshow installed and asked if i wanna uninstall it. done. klite installed. reboot.

- then i unchecked these settings again (i did uncheck them earlier but no success)

- post-21849-0-02276200-1361714675.jpg

- reboot

- sound output works :D :D :D

i dont know if it was because of some ****ty codec pack or because i did not reboot.

i will reboot it now again to see if it keeps working or if it was just luck.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • There is a default resolution setting in Settings > Display that can be changed with a click. You can also change the settings on a per-game basis. No CLI needed. Also, Steam has countless games that are not "[perpetual] alpha/beta games", so no need for the straw man. Plus you can use other stores as well. And console games (e.g. PS5) cost a fortune, which itself more than negates the price subsidy on the system, unless you plan on exclusively playing 1 or 2 games. It's true that you shouldn't buy a system that doesn't support the game(s) you want to play, but I think that's kinda obvious, and applies to every console as well as PC. I don't game in the living room and have no need of a Steam Machine, but there is a clear market segment that would find it useful.
    • RSS Guard 5.2.0 by Razvan Serea RSS Guard is a simple (yet powerful) feed reader. It is able to fetch the most known feed formats, including RSS/RDF and ATOM. It's free, it's open-source. RSS Guard currently supports Czech, Dutch, English, French, German, Italian. RSS Guard will never depend on other services - this includes online news aggregators like Feedly, The Old Reader and others. RSS Guard is developed on top of the Qt library and it supports these operating systems: Windows GNU/Linux OS/2 (eComStation) Mac OS X xBSD (possibly) Android (possibly) other platforms supported by Qt The core features of RSS Guard are: support for online feed synchronization via plugins, Tiny Tiny RSS (from RSS Guard 3.0.0). multiplatform, support for all feed formats, simplicity, import/export of feeds to/from OPML 2.0, downloader with own tab and support for up to 6 parallel downloads, message filter with regular expressions, feed metadata fetching including icons, simple Adblock functionality, customized popup notifications, Google-based auto-completion for internal web browser location bar, ability to cleanup internal message database with various options, enhanced feed auto-updating with separate time intervals, multiple data backend support, SQLite (in-memory DBs too), MySQL. is able to specify target database by its name (MySQL backend), “portable” mode support with clever auto-detection, feed categorization, drap-n-drop for feed list, automatic checking for updates, ability to discover existing feeds on websites, full support of podcasts (both RSS & ATOM), ability to backup/restore database or settings, fully-featured recycle bin, printing of messages and any web pages, can be fully controlled via keyboard, feed authentication (Digest-MD5, BASIC, NTLM-2), handles tons of messages & feeds, sweet look & feel, fully adjustable toolbars (changeable buttons and style), ability to check for updates on all platforms + self-updating on Windows, hideable main menu, toolbars and list headers, KFeanza-based default icon theme + ability to create your own icon themes, fully skinnable user interface + ability to create your own skins, “newspaper” view, plenty of skins, support for "feed://" URI scheme, ability to hide list of feeds/categories, open-source development model based on GNU GPL license, version 3, tabbed interface, integrated web browser with adjustable behavior + external browser support, internal web browser mouse gestures support, desktop integration via tray icon, localizations to some languages, Qt library is the only dependency, open-source development model and friendly author waiting for your feedback, no ads, no hidden costs. RSS Guard 5.2.0 changelog: Added: Feed auto-fetch can now also be delayed while Feral GameMode is active on Linux and startup auto-fetch is skipped when GameMode is already active. (#2265) WebEngine builds can now use RSS Guard generated proxy auto-config (PAC) rules so article/web browsing follows per-account and per-feed proxy settings more closely. (#2273) Generated PAC rules now also cover related subdomains and use Public Suffix List data, so feeds such as feeds.bbc.co.uk can also proxy resources from images.bbc.co.uk. (#2273) Standard feeds can now define extra proxy domains, useful when article images, stylesheets or other page resources are loaded from a CDN or another domain that should use the same feed proxy. (#2273) RSS Guard now asks for proxy credentials when a WebEngine page needs proxy authentication and can fill credentials from the current feed proxy when available. (#2273) Network settings again include an option to ignore all cookies, which clears stored cookies and prevents new cookies from being accepted. Standard RSS/ATOM feeds can now individually ignore cookies while downloading feed data. Stored cookies can now be deleted from the Tools menu. Custom skin colors can now override the feed list article count color separately from feed titles, including a separate highlighted color. (#2275) Settings dialog can now search across available settings and highlight matching controls. (#1754) Standard RSS/ATOM feeds can now optionally be reported as broken when they are valid but contain no articles. (#2039) Standard RSS/ATOM feeds can now override the application-wide feed connection timeout per feed. (#1023) Tray icon can now use a custom background color and unread-count text color, with an option to reuse the generated icon as the application icon. (#1973) Support for more benevolent parsing of Gemlog entries (#2295). Article list can now show when an article was received by RSS Guard. (#947) Feed deep discovery now actually scrapes all links found in the website and checks if they are feeds or not. This greatly enhances usability of the deep discovery mode and discovers many more feeds than before. (#2306) Search boxes now show a small dot when the feed or article list is hiding some items because of active filtering. (#873) Articles now have a shortcut-assignable action to open the homepage of the feed they belong to. (#2060) Fixed: Parallel feed updates no longer crash when multiple update results are processed at the same time. (64cf521) Links in WebEngine articles opened from feeds such as Kill the Newsletter now open correctly instead of being swallowed by the embedded page. (#2272) Relative article URLs resolution was kinda broken. (#2282) Clicking article URL did not work when the URL had "fragment" set. (#2293) The default proxy setting now uses Qt/system default proxy behavior instead of forcing no proxy. (e0263ad) WebEngine article loading now keeps the current feed context, so feed-specific proxy credentials remain available while the article page loads. (fdd0f00) Download: RSS Guard 5.2.0 (64-bit) | Portable | ~ 130.0 MB (Open Source) Link: RSS Guard Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This is gonna separate the creeps from the rest of the crowd.
    • "Claude, is our CEO a compete and utter fool by wasting money on AI in this already worthless Teams chat?"
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!