Just got a new AV to HDMI converter. Does not display the video. Need help


Recommended Posts

Hello helpers from all over the world! I'm into a somewhat infuriating situation.

Around a month ago, I purchased from eBay a V2HD video converter box, so I could hook my Wii to my Samsung SyncMaster 2494 - 1080p monitor, which only has DVI and VGA inputs.

This little box is supposed to convert a composite/component/s-video signal and output it to an HDMI one.

As you can see, the box did not work. It didn't output the video signal. **

I contacted the seller, and troubleshooted doing the basic stuff:

- Checking the cables.

- Seeing that everything was connected properly

- Trying the converter on other devices.

Nada.

The seller send me a new device, which I received today.

I'm about to hook it up and....! Ta da! Nothing again! I sent a new message to the seller, and I've yet to receive a reply. Henceforth, I would love to see if someone can give me some tips on how to fix this.

Here is how I'm setting up everything:

I have an HDMI-DVI cable which I have used to hook up from Blu-Ray players to Xbox 360s. Every HDMI capable device, has been successfully connected. So the cable is not the problem.

I hook up the video (Yellow cable) to the V2HD's input, and connect the HDMI end to the output. the audio cables are connected to my Logitech speakers.

Symptoms: No image is displayed. Audio is going normally through the speakers. The Monitor's screen is pitch black, but it stays as it it detects some kind of input.

I've left the device turned on, ever since, and I can see from time to time, some distorted stripes popping on the screen and vanishing in an instant.

Any ideas? Thanks a lot :D

Note*: The instruction manual doesn't come with a troubleshoot section. In fact, it's just a quick start-up guide, which doesn't seem to hint at my problem.

** I lent the device to my friend, since in my home there are no HDMI capable televisions, to test it out on another device. For our surprise the Audio did went through, but the video didn't.

DVI-I vs DVI-D cable ?

Just a guess, DVI-I carries analogue and digital signals, DVI-D only carries digital

Check

http://www.pcadvisor...d-cables-apart/

Just was checking the difference, half an hour ago.

Yes, the monitor is DVI-D

Just was checking the difference, half an hour ago.

Yes, the monitor is DVI-D

Ah sorry, I misread what you were doing, I thought you were trying to carry an analogue signal through a DVI lead

The V2HD box should push out the digital signal and then you are using an HDMI > DVI adapter to connect to the LCD...

How long is the HDMI>DVI cable ? Maybe its too long for the V2HD to push the signal out to ? Not sure off hand the max length of HDMI cables

Have you tried it using a normal HDMI > HDMI cable into a different HDMI LCD ? Just to rule out the HDMI > DVI conversion

What device is outputting the composite signal? Maybe whatever it is, is not set up to output via composite? Do you have any TV's that you can hook up directly composite to composite to make sure it's outputting video?

Have you tried the V2HD's other inputs (Component, S-video, audio)?

Ah sorry, I misread what you were doing, I thought you were trying to carry an analogue signal through a DVI lead

The V2HD box should push out the digital signal and then you are using an HDMI > DVI adapter to connect to the LCD...

How long is the HDMI>DVI cable ? Maybe its too long for the V2HD to push the signal out to ? Not sure off hand the max length of HDMI cables

Have you tried it using a normal HDMI > HDMI cable into a different HDMI LCD ? Just to rule out the HDMI > DVI conversion

The cable is like 5 Feet long.

A friend already tried HDMI - HDMI and yielded the same results.

Is this device powered? As in you have to plug it into the wall?

Yes. The device is A/C powered

What device is outputting the composite signal? Maybe whatever it is, is not set up to output via composite? Do you have any TV's that you can hook up directly composite to composite to make sure it's outputting video?

Have you tried the V2HD's other inputs (Component, S-video, audio)?

The device is a Wii :p.

And yes, I have a small TV screen and I can verify that it IS outputting the video.

Hell, after 4 hours of leaving it turned on, I can see some blinking images of the Wii's Home Screen.

Thanks all for the help :D

I think I would get a refund and buy from someone else this time :)

I think so :)

Funny thing is, I've found someone on YouTube who had this device and worked flawlessly... Seems that isn't the case with me...

Well, thanks a lot for the help! :D

you should take a look at this --> http://www.neoya.com/shop/wii2hdmi/

got it a little while ago for my wii, as my new TV didn't have anything else but HDMI and cable input, and it's working very well.

No delay or image degradation, like my old pioneer receiver did when converting anything to HDMI.

you should take a look at this --> http://www.neoya.com/shop/wii2hdmi/

got it a little while ago for my wii, as my new TV didn't have anything else but HDMI and cable input, and it's working very well.

No delay or image degradation, like my old pioneer receiver did when converting anything to HDMI.

Thanks :)

BTW.

This has been the response:

http://s1101.beta.photobucket.com/user/ohyounger/media/okeba/VC030FORRCAinput_zpsd3249e6f.mp4.html

I've tried this too, and can't seem to get it work. :/

Ok. Sorry for not posting back. I went yesterday to a friend's house who has an HDMI-capable TV. I tested out the box, and it DID work.

I've received feedback from other users, that converters are pretty picky and that it will only work with an HDMI based solution.

What I can't understand is, why it does NOT work with a DVI-HDMI cable? Every other HDMI capable device I have tried, has worked flawlessly. Yes, it is a DVI-D capable device....

Could it be that it has different pins? I have a DVI-HDMI cable that every device, except PCs recognizes. Could this be the same issue?

This topic is now closed to further replies.
  • Posts

    • (Topic to get the juices flowing this Sunday morning!...) Actually, the situation has almost nothing to do with "lack of skills", especially since assembly-line skills can be taught to anyone, including Americans, certainly. Rather, the inadequacy-to-impossibility of large-scale tech manufacturing in America today, and the reasons why America finds tech manufacturing completely onerous in the 21st century, has to do with politically driven laws amid a plethora of non-scientific, utterly politicized "science-fact" that is patently false, punitive business taxation at every turn, an array of judicial fines of unimaginable scope and complexity, and, last but not least, American unionization strictures that serve to actually slay job creation and hobble all such manufacturing endeavors in America before they can get off the ground. Globalism emerged, they tell us, as the needed answer to American hubris and an unholy American drive to excel. Unless one is buried under mounds of political propaganda, it's easy to see the absurdity of labeling the employees of SpaceX, for instance, as "unskilled labor"... Etc. ad infinitum. At one time in the recent past, American manufacturing prowess was the envy of the world in a wide variety of technical fields! The current federal and state government roadblocks against America becoming competitive globally in tech manufacturing are considerable, it's true, as anyone with a working brain knows. But remarkably, that is only half the story! The other half of the story is, of course, the corporations themselves... Chinese tech manufacturing is simply unassailable in terms of profits, because the Chinese government wants to see its tech manufacturing second-to-none globally so that no companies/nations can compete in terms of ROI, and China has completely succeeded in that goal. Let's tic-off a few things: *Chinese tariff policies are set according to what is considered best for Chinese business, Chinese employees, and the Chinese people. Huge difference with how things are done with tariffs in the US--as the US government (SCOTUS in this case, Congress in others) plainly feels that tariffs are "unfair" for the limited number of citizens who may pay them, whereas nothing is "unfair" when Congress considers the Personal Income Tax rates to be infinitely hike-able, along with infinitely enlarging annual budget deficits. *The Chinese government boldly subsidizes Chinese companies to artificially amplify their profits. *The Chinese government deliberately refuses to avidly demonize Chinese businesses and does not consider Chinese businesses "the enemy", so very unlike American (D)s these days. *Chinese labor laws and businesses are allowed to set their own labor policies according to what Chinese companies consider is best for companies and their employees... Simply put, American workers in tech manufacturing are not allowed to set their own labor policies! It is the height of hypocrisy for Americans to decry working conditions in China while simultaneously ensuring that American products are manufactured in China, not in the US, simply to maximize profits. There is nothing wrong with making a profit, of course, absolutely nothing. But there is plenty wrong with attempts to normalize hypocrisy of this kind! But rank hypocrisy and the (D) party in the US are longtime bedfellows... The current government in Washington is working overtime to see if it can toss out the horribly poor, failed economic policies of the past, while the (D)s still in Washington work very hard to bring back the stupidity whenever possible. With the right policies in place, America can be an infinitely competitive manufacturer.
    • eSound Music 3.0.0 by Razvan Serea eSound Music is a free music streaming app that gives you access to over 150 million tracks from all genres. It allows you to search and listen to your favorite songs, create personalized playlists, and explore trending music. With an intuitive interface and smart search, discovering new artists and hits is fast and easy. You can even stream music in the background while using other apps. One of eSound’s standout features is its offline mode, letting you download and listen without internet access. eSound is widely compatible, working seamlessly across Windows, macOS, Linux, iPhone, iPad, Android, HarmonyOS, Amazon Fire devices, CarPlay, Android Auto, and more. eSound Music key features: Over 150 million tracks available Smart search for songs, artists, albums, and playlists Personalized song recommendations Continuous playback with auto-generated playlists Offline mode with song and playlist downloads Daily-updated trending charts and top songs Sleep timer to auto-stop playback High-quality audio support Customizable playlists and favorites Support for Apple CarPlay and Android Auto Works on Windows, macOS, Linux, iOS, Android, HarmonyOS, Amazon Fire, and more Cross-device sync via account login Background playback while using other apps Download: eSound Music 64-bit | Portable | ~160.0 MB (Free, paid upgrade available) Download: ARM64 | 116.0 MB Links: eSound Music Website | Screenshot | Web Player | Other OSes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • All these CEOs got the biggest boners thinking about firing employees for AI. Turned out it was just a wet dream.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      65
  • Tell a friend

    Love Neowin? Tell a friend!