Why Does YouTube's throughput suck so bad?


Recommended Posts

Over the past few months I've grown more and more frustrated with YouTube. Regardless of the device or WiFi I use, the buffering and watch-ability is simply awful.

I've got an iPhone and a Samsung Galaxy tablet that connect to both my home and work WiFi Both experience the same laggy, it-plays-5-seconds-at-a-time between buffering. I was able to find a iOS app that lets me lower the resolution from HD to "Low". This helps a bit but I still encounter issues.

Anyone else have similar experiences/frustrations?

I've had this issue with VerizonFIOS and Comcast ISPs. Also, and I probably should have mentioned this; Vimeo runs as smooth as butter in HD. No issues. It's gotta be YouTube. ...right?

Nope never had issue one with youtube bandwidth

Do you have a specific video your having issues with you can link too? Some of the major ISP use their own caching server for youtube, that could be your problem?

I would rightclick on a video and get the info, what speed are you getting. I would also again from rightclick on video to a speedtest - what does that show?

post-14624-0-87586700-1361996596.jpg

REJECT/DROP 173.194.55.0/24

REJECT/DROP 206.111.0.0/16

(for the uninformed, /16 and /24 is not a range, but a subnet class) ie, 206.111.0.0 - 206.111.255.255 = /16)

Problem solved, was posted on reddit just this week. I did it myself and everything loads instantly now on my 85mbit FiOS line vs before laggy as ever. This affects all the feeds on youtube/vimeo, so all will be well. It can be confirmed by adding and removing with tests before after and then removed after again.

Time Warner and Verizon have this issue, no one is quite sure the absolute cause, but those servers your blocking are google and vimeo servers that most likely handle content throttling. When they are blocked you download directly from the source, ie; google data center.

Use caution as you are blocking a wide range of ip address locations. No one has reported any adverse effects yet.

Linux commands below; (Advanced Firewall on Windows Vista or higher can handle this also)

sudo ipfw add reject src-ip 173.194.55.0/24 in

sudo ipfw add reject src-ip 206.111.0.0/16 in

Source; http://www.reddit.co...50w8x?context=1

Could also be shoddy ISP DNS caching, I used to have issues with 1080 YT videos till I stopped using Comcast's DNS for a couple of servers that were closer to me, took a few days to notice the difference because like a dork I forgot to run ipconfig /flushdns after making the changes

REJECT/DROP 173.194.55.0/24

REJECT/DROP 206.111.0.0/16

Problem solved, was posted on reddit just this week. I did it myself and everything loads instantly now on my 85mbit FiOS line vs before laggy as ever. This affects all the feeds on youtube/vimeo, so all will be well. It can be confirmed by adding and removing with tests before after and then removed after again.

Time Warner and Verizon have this issue, no one is quite sure the absolute cause, but those servers your blocking are google and vimeo servers that most likely handle content throttling. When they are blocked you download directly from the source, ie; google data center.

Use caution as you are blocking a wide range of ip address locations. No one has reported any adverse effects yet.

can you elaborate on this? i also have this Youtube issue. you sit there and constantly have to wait for youtube to buffer. oh, you wanted to watch that 30 second clip? that'll be 5mins of buffering...

Anyone else have similar experiences/frustrations?

No where near as well educated as Budman in wifi, bandwidth, or any thing of the sort as, but I've never had any of buffering or lag watching stuff on youtube

I just downgraded to 30meg last month as I was effectively wasting money on 120

Edit Please disregard my post

I didn't realise we were talking about US broadband, as a UK resident I don't know your infrastructure

can you elaborate on this? i also have this Youtube issue. you sit there and constantly have to wait for youtube to buffer. oh, you wanted to watch that 30 second clip? that'll be 5mins of buffering...

See; http://www.reddit.com/r/technology/comments/13kmvd/have_time_warner_internet_but_can_barely_stream/c750w8x?context=1

Couple posts down.

I was having problems last Spring... found out my modem was not fully supporting all the channels offered by my ISP. Purchased a new modem and am taking full advantage of the offered bandwidth.

"all the channels"? what's that mean?

I also confirmed the above fix on my works Verizon MPLS connection, amazing it was. :) I always just dealt with the slow YouTube thinking there was nothing could be done about it till I stumbled on the reddit post made this week.

Hi Klownicle, can you elaborate on how to implement this fix? Thanks!!!!

See; http://www.reddit.co...50w8x?context=1

Couple posts down.

from what i gathered in the post, i just need to add the 206.x.x.x/16 space in the windows firewall, right? i just added a Deny rule on my work laptop. Do i also need to do the other 173 range that you posted?

Also, some people were doing this in their router's IP tables, but i'm not so sure i can do that.

from what i gathered in the post, i just need to add the 206.x.x.x/16 space in the windows firewall, right? i just added a Deny rule on my work laptop. Do i also need to do the other 173 range that you posted?

Also, some people were doing this in their router's IP tables, but i'm not so sure i can do that.

Someone linked to a good guide the other day, but I'm not able to find it at this time.

You need to go into your advanced firewall for windows, create a outbound rule, choose custom, all programs, all ports, tcp for protocol, enter address lines as 206.111.0.0/16 etc, and finish.

It should look like below for 206.111.0.0/16 in your advanced firewall if done right.

firewall_settings.png

The 173 subnet class c is for vimeo if I read correctly, I just used google in the above example. And its 206.111 not 206.x

And IpTables wise, routers like the Actiontec supplied by FiOS allows for GUI Web Access for advanced filtering.

So if that blocking works, then yes its a caching issue with the verizon and timewarner peering caches.

Sure you can block those networks, and then you should bounce to some other source.

I am not sure I would jump on blocking a /16 like that, but if that whole block is just used for cache - then its not going to hurt anything. As long as your aware if you run into connection issues sometime in the future, verify if on that netblock, etc.

"all the channels"? what's that mean?

His issue has nothing to do with youtube but his connection speed. He probably switched to a docsis 3 modem, which needs at least 4 channels to bond with in order to take advantage of the higher tier offerings. This shouldn't have been a problem to begin with unless nobody informed him of upgrades or he ignored letters sent out.

Virgin Media over here have a similar issue - there's a thread on their forums that's been going on for over a year now.

They run caching servers, but those servers don't have enough capacity to deal with the number of requests. Which results in me having a 100mb connection and not being able to stream a standard def video from YouTube!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
    • Normally, I admit when a title is clickbait (unfortunately, it's become somewhat necessary to compete against AI-dominated news sections today), but in this case, all supported versions is implied and doesn't need to be spelled out in the title. Of course, I'm covering a Patch Tuesday update bug that is only available to supported Windows SKUs. All our coverage relates to supported Windows software and SKUs only unless we expressly state that it's "unsupported", "unofficial", or "third-party". I'm sorry, but supported/official SKUs don't need to be spelled out as such in every Neowin headline.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!