Is it possible to run a two monitors (one on the gpu, one on the cpu)?


Recommended Posts

Hi I am wondering if it is possible to run two monitors from the GPU and CPU. I tried running them both on my graphics card but it never worked. It only seems to work with one. I read that one of the ports only has enough power for one?

So I thought maybe I could run one of the CPU and the other on the GPU? My motherboard has a Monitor output but is it possible to enable them both in the bios? Or can it only run either the gpu or the cpu gfx at one time (the i7 3770K has onboard graphics)? I can only see the ATI in the device manager but if I take the graphics card out the onboard one is displayed after rebooting (to be expected).

If this is not possible I will probably just buy an extra graphics card. All specs in my sig.

Edit, I run windows 8 pro (I actually like it so don't go of topic about that)

I said my specs are in the sig, and I said it didn't work when it had two monitors in the GPU. Did you read my OP?

Erm, of course I read it, I don't have sigs enabled though, so list your specs

And explain what you did when you failed to enable 2 displays

Untitled.png

To answer your question no, once a PCI-E graphcis card is plugged in the onboard graphics (be that old school intel mobo grapics or new schoole CPU integrated graphics) are disabled.

However there is no way your GPU can't power 2 monitors itself...as mentioned it should be able to do 4.

You must have a setting mis-configured. or old drivers....that or your card is faulty...in which case send it back.

Just about every modern GPU can run 2 displays natively, for 3 you might need to connect to a display port if using just 1 GPU, but for 2, simple job of connecting and enabling

Exactly, I think even my GPU from about 2003 could do dual screen.

but yes if you want 3+ monitors you'll need either dual cards or eyefinity with display ports.

My specs are:

PC: Intel Core i7 3770K Quad Core IvyBridge, Asus P8Z77-V LK, 8GB DDR3, ATI Radeon R6950.

I don't recall it appearing in the display propties as two monitors when they both are on the GPU. But I will try again.

Are you perhaps using a DVI to VGA cable on one or both monitors?

The AMD Radeon 6950 has 2 DVI connectors at the back, but one is DVI-I and the other DVI-D. The DVI-I connector has both a digital and an analog signal, which means only the DVI-I-connector can use a DVI-to-VGA cable.

So you need at least 1 monitor that has a DVI, HDMI or DisplayPort connection, if the other monitor only has VGA

My specs are:

PC: Intel Core i7 3770K Quad Core IvyBridge, Asus P8Z77-V LK, 8GB DDR3, ATI Radeon R6950.

I don't recall it appearing in the display propties as two monitors when they both are on the GPU. But I will try again.

Ok, so what are the 2 connections from the GPU to the displays ?

DVI / HDMI or DVI / DVI etc etc

What cables are you using ?

If both displays using either of the above ports are connected and turned on, then Windows should see them in display properties shown in my screenshot

EDIT - And what are the 2 display models ?

Yes you should be able to, I'm running 4 monitors off my graphics card and a 5th off the onboard graphics with no problems, just enabled it in the bios and windows picked it up.

Thanks for the replies so far.

My main monitor is a DellST2410 that is hooked up on DVI on the first availble DVI port.

The second monitor is just an old videoseven VGA widscreen using an adapter to DVI, I know it's not the greatest make compared to my dell but thought it would make good use for a second monitor (so I can have other stuff open while I am playing games on my main monitor).

It does actually now apper in display properties but won't let me enable it.

extradisplay.png

extradisplay2.png

Are you perhaps using a DVI to VGA cable on one or both monitors?

The AMD Radeon 6950 has 2 DVI connectors at the back, but one is DVI-I and the other DVI-D. The DVI-I connector has both a digital and an analog signal, which means only the DVI-I-connector can use a DVI-to-VGA cable.

So you need at least 1 monitor that has a DVI, HDMI or DisplayPort connection, if the other monitor only has VGA

I think this might be my problem by the sounds of it.

So try switching the cables around, also make sure you reboot after swapping them around. Windows doesn't always allow you to configure your monitors properly if they weren't connected during boot, not sure if this changed with Windows 8.

So try switching the cables around, also make sure you reboot after swapping them around. Windows doesn't always allow you to configure your monitors properly if they weren't connected during boot, not sure if this changed with Windows 8.

This ^^

DVI-I should be the one connected to your VGA display as it can carry analogue signals

DVI-D can only carry digital

VGA is analogue

So try switching the cables around, also make sure you reboot after swapping them around. Windows doesn't always allow you to configure your monitors properly if they weren't connected during boot, not sure if this changed with Windows 8.

Yer I just tried switching them around. The second monitor did detect in Windows but it did not output anything (I set the correct resolution and extended the displays) but nothing however it was listed in device manager. Just kept getting no signal detected.

Yer I just tried switching them around. The second monitor did detect in Windows but it did not output anything (I set the correct resolution and extended the displays) but nothing however it was listed in device manager. Just kept getting no signal detected.

Are you sure the cable you are using for the VGA display is DVI-I ?

Check here

http://www.pcadvisor.co.uk/how-to/pc-peripheral/3365585/how-tell-dvi-i-dvi-d-cables-apart/

You're not plugging your monitor into your CPU. Your motherboard has an onboard GPU. Thus you have two separate GPUs.

Is your monitor powered on? Have you tried another monitor? or tried that monitor on another computer?

I was under the impression the CPU had an on-die GPU, http://www.anandtech.com/show/5771/the-intel-ivy-bridge-core-i7-3770k-review/8 and the motherboard port was just to connect the display to it.

Yes the monitor is on, not tried another monitor but will try it on another PC to make sure it's working.

I've had the onboard (i7) graphics and an add on gpu (560GTX) both working concurrently - I wanted to use the onbooard for mornal, unintensive windowsie stuff on one screen, and the higher stress stuff (gaming, etc) on the GPU.

It did work, but actually it caused my media center playback to stutter, even on the other screen. Went back to running them both off the graphics card and it works so so so much better. Onboard has been disabled again.

(as a note, I also have sig's hidden, as I suspect many here do, so was unable to see your specs)

I was under the impression the CPU had an on-die GPU, http://www.anandtech...-3770k-review/8 and the motherboard port was just to connect the display to it.

Yeah you're right. I forgot new CPUs have integrated GPUs. It just sounds weird.

the z77 has lucid virutre which enables hybrid gpu on desktops,in order to use this feature you have to plug you display cables onto the mobo and not on to the gpu

This topic is now closed to further replies.
  • Posts

    • Dude, im talking about simply disable it from settings app. Because of the eu regulation, you could disable it here for years.
    • One big question about Mars was answered thanks to Einstein's 100 year old theory by Sayan Sen Image via DepositPhotos Scientists at the U.S. National Institute of Standards and Technology (NIST) have calculated how time passes on Mars compared with Earth, adding detail to how timekeeping would need to work beyond Earth’s orbit. The study, published in The Astronomical Journal, found that clocks on Mars run an average of 477 microseconds, or millionths of a second, faster per day than clocks on Earth. A microsecond is one millionth of a second, a very small unit used in precise scientific timing systems such as atomic clocks, which measure time using consistent atomic behavior. This difference is not constant. Because Mars moves around the Sun in a non-circular path (an eccentric orbit, meaning its distance from the Sun changes over time instead of staying fixed) and is affected by gravity from other bodies, the daily difference can vary by as much as 226 microseconds over a Martian year. The study also identifies smaller repeating changes of about 40 microseconds per day linked to synodic cycles (repeating periods that describe how planets line up with each other as they orbit the Sun from different positions). These longer patterns affect how time differences slowly rise and fall. To make these estimates, researchers compared Mars with Earth and the Moon. The work looks at relativistic proper time (the time actually measured by a clock depending on its speed and the strength of gravity where it is located, as described in Einstein’s relativity). This shows that each world has its own slightly different “rate” of time. This becomes more important as space missions expand into cislunar space (the region between Earth and the Moon) and toward Mars. On Earth, time systems rely on atomic clocks and satellites, which stay closely synchronized for navigation and communication. The study is based on Albert Einstein’s theory of relativity, which shows that time is affected by gravity and motion. Stronger gravity makes clocks run slower, while weaker gravity makes them run faster. “The time is just right for the Moon and Mars,” said NIST physicist Bijunath Patla. “This is the closest we have been to realizing the science fiction vision of expanding across the solar system.” A day on Mars is about 40 minutes longer than on Earth, and a Martian year lasts 687 Earth days. But the main question is not just about days and years, but how fast time itself passes. An atomic clock placed on Mars would function normally, but compared with one on Earth, the two would slowly drift apart due to differences in gravity and motion. This requires careful calculation of what is similar to a time-zone difference across planets. Researchers modeled Mars using a reference surface and included gravitational effects from the Sun, Earth, the Moon, and other planets. This includes a multi-body gravitational system (often described as a three-body or four-body problem, where predicting motion becomes difficult because multiple large objects all pull on each other at the same time through gravity). Mars also follows a Keplerian orbit (an idealized elliptical orbit based on simple gravitational laws that assume smooth motion, before adding real-world disturbances from other bodies). In addition, the researchers accounted for solar tides (small changes in gravitational force caused by the Sun that slightly distort planetary motion and timing, especially in systems involving Earth and the Moon). These combined effects are described as relativistic proper-time offsets (small but measurable differences in elapsed time between locations caused by gravity and motion), which must be included when comparing clocks across planets. “But for Mars, that’s not the case. Its distance from the Sun and its eccentric orbit make the variations in time larger. A three-body problem is extremely complicated. Now we’re dealing with four: the Sun, Earth, the Moon and Mars,” Patla explained. “The heavy lifting was more challenging than I initially thought.” Although the differences are extremely small, they matter for navigation and communication systems that depend on precise timing. Even modern networks on Earth, such as mobile systems, rely on timing accuracy at very small fractions of a second. Communication between Earth and Mars currently takes about four to 24 minutes or more depending on planetary positions, meaning signals are not real-time. A shared and accurate time system could help future missions reduce confusion in navigation and data exchange. “If you get synchronization, it will be almost like real-time communication without any loss of information. You don’t have to wait to see what happens,” Patla said. Researchers note that fully developed interplanetary communication networks are still far in the future. However, understanding how time behaves across planets helps prepare for those systems. “It may be decades before the surface of Mars is covered by the tracks of wandering rovers, but it is useful now to study the issues involved in establishing navigation systems on other planets and moons,” said Neil Ashby. “Like current global navigation systems like GPS, these systems will depend on accurate clocks, and the effects on clock rates can be analyzed with the help of Einstein’s general theory of relativity.” Patla added that the results also help improve understanding of time itself under relativity. “It's good to know for the first time what is happening on Mars timewise. Nobody knew that before. It improves our knowledge of the theory itself, the theory of how clocks tick and relativity,” he said. Source: NIST, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • TeraCopy 4.0 Build 26 by Razvan Serea TeraCopy is a compact program designed to copy and move files at the maximum possible speed, also providing you with a lot of features. Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives. Pause and resume transfers. Pause copy process at any time to free up system resources and continue with a single click. Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skips the file, not terminating the entire transfer. Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files. Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual. TeraCopy is free for non-commercial use only. For commercial use you need to buy a license. The paid version of the program includes the following features: Copy/move to your favorite folders. Save reports as HTML and CSV files. Select files with the same extension/folder. Remove the selected files from the copy queue. TeraCopy 4.0 Build 26 changelog: Added support for receiving files via the LocalSend protocol. Improved exception handling and automated bug report upload. Fixed several minor bugs and small memory leaks. Build 26 (June 24) Fixed a rare exception when a transfer completed. Features added since version 3.17: Enhanced speed graph. New multi-threaded copy engine. Support for copying to multiple targets. Queue system for managing multiple copy operations. Support for receiving files via the LocalSend protocol. TeraCopy entry in the modern Windows Explorer context menu. Integrated toolbar in the title bar. Why receive LocalSend transfers with TeraCopy? Handle file conflicts: Skip, overwrite, or rename files when a file with the same name already exists. LocalSend always creates another copy, which can waste time and disk space, especially when resuming an interrupted transfer. Filter unwanted files: Apply ignore lists or remove files manually before accepting a transfer, so unnecessary files are not downloaded. Better performance on fast networks: In tests over a 10 Gbps connection, TeraCopy received files several times faster than the standard LocalSend app on Windows. Download: TeraCopy 4.0 Build 26 | 14.5 MB (Freeware, paid upgrade available) View: TeraCopy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Briefly used Turbo Pascal (and Turbo C++) in 97 and soon after that I bought PC magazine that included a full version of Delphi 2. I still use Delphi today, some 29 years later.
    • Age of Empires Mobile comes to PC, here's how to carry over progress from your phone by Ivan Jenic Image: YouTube/Microsoft Microsoft just released Age of Empires Mobile for PC. The game, officially called Age of Empires Mobile: PC Edition, is available for free on Steam and Microsoft Store, almost two years after its initial release for handheld devices. Age of Empires is one of those franchises that entire generations grew up with. The original came out in 1997, and immediately got people hooked to building civilizations and crushing their enemies on the battlefield. However, the franchise today is a far cry from its roots, as Age of Empires Mobile is, well, a game optimized for handheld devices, and not a classic RTS title we’ve all loved for years. And, of course, it includes in-game purchases. The PC version is still a mobile game at its core, but it’s been optimized for desktop play. There’s mouse control, full keyboard compatibility, and a refined UI. Microsoft also refreshed the visuals with some 4k textures, so the game should look better on larger screens. The game supports Crossplay, so you can switch between your phone, tablet, and PC without losing anything. But linked progress doesn’t come out of the box, as you have to enable it first. Here’s how to link your progress: On your mobile device, open Age of Empires Mobile. Go to Settings (Gear icon) > Account. Select Bind Account and choose a sign-in option. Once you enable account binding, sign in on PC using the same method, and your progress will be accessible across all your devices. Xbox Game Pass subscribers also get a bonus reward pack on PC, which includes: 1 Monthly Pass Token 1 Custom Resource Chest 10 Universal 60-Minute Speed-Ups 1,000 Empire Coins Exclusive Player Portrait Frame You can find more info about Age of Empires Mobile: PC Edition, as well as download links, on the Age of Empires official website.
  • Recent Achievements

    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      458
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!