Graphics card for my new machine.


Recommended Posts

Hi All

I am putting together a machine for personal use, which is based on a pre-built machine I got a good deal on. Unfortunately the deal only included the built-in HD graphics which is bit light for my taste, so I am looking to change that.

The current spec's of the machine are:

CPU: i7-3770

RAM: 20 GB

Storage: 180 GB Intel 520 SSD + 3 TB HDD

Graphics: Intel HD

OS: Windows

My main reason for adding some discrete graphics is some light and occasional gaming, but I do not play the latest and greatest games. Most of the time is used with browsing, programming and a little photo editing.

For more specific requirements I have, in order of importance:

  • Low noise. It does not have to be silent, but low enough noise level not to stand out.
  • Brand. A proven brand (ASUS, Sapphire, etc) and there will be no OC of the system or graphics card.
  • Size. It can be full length and dual-slot if needed.
  • Price. Price is not the deal breaker, but I don't want to pay for the latest and greatest.

I was looking mostly at AMD Radeon card, as I have had those in the past, but the Nvidia 600 series seems to be quite powerful and not so noisy.

Let me know what your experiences and recommendations are.

Link to comment
https://www.neowin.net/forum/topic/1140488-graphics-card-for-my-new-machine/
Share on other sites

Thanks for the quick replies, and the G3D Mark score. I've never been a fan of on-board or built-in graphics, and a score of ~450 for the HD4000, even my phone can do better. :D

My main problem is the noise of the card, as it difficult to estimate and you need to dig into the reviews to see what it is like. I was thinking to stay away from anything that required additional power connections, because of the logic more power = more cooling = more noise.

At the moment I am looking at Radeon 7750 cards, with 1 or 2 GB of memory. Popular choices seems to be MSI, Club3D and Sapphire.

Any brands I should focus on for lower noise?

Thanks for the quick replies, and the G3D Mark score. I've never been a fan of on-board or built-in graphics, and a score of ~450 for the HD4000, even my phone can do better. :D

My main problem is the noise of the card, as it difficult to estimate and you need to dig into the reviews to see what it is like. I was thinking to stay away from anything that required additional power connections, because of the logic more power = more cooling = more noise.

At the moment I am looking at Radeon 7750 cards, with 1 or 2 GB of memory. Popular choices seems to be MSI, Club3D and Sapphire.

Any brands I should focus on for lower noise?

The 7750 is a waste of money. Also your logic is a bit flawed, the noise really comes down to a combination of power use and the fans used. Most of the popular mid range cards (7770, 7850, 650Ti and 660) are relatively low power, depending on the brand will depend on the amount of noise they make. In general, the better the brand the better the fan.

For reference, I have a 660, and I can't hear it over my CPU fan.

The 7870 is nice bang for buck, I have my machine on the floor to the right of me and I can only hear the case fans, even stressed to death with benchmarks I rarely see the temp pass 61c this time of year, before it got so cold 70c~ was the highest I saw it, but I've also given my case a good clean since then

All the modern cards do really well with keeping the noise down. I used to run GTX 570s in SLI, and they got kind of loud when gaming. I now have a 680 and it doesn't get loud at all.

Regardless, the noise comes down to how sound-proof your case is. If it's a big concern of yours, there are special cases that are made with sound-proofing materials. You can also buy a watercooler for your CPU and quieter case fans.

Big thanks to all of you for giving advise, and especially for setting me straight on power, cooling and noise. Perhaps I should consult you more often!

Old habits die hard, so I ordered an Radeon 7870, and hoping for it to be quiet.

In the meantime enjoy the weekend, and for those who are old enough have a virtual beer. :beer:

This topic is now closed to further replies.
  • Posts

    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!