PC Cooling - Air or Liquid?


Recommended Posts

Curious on how people have their cooling set up in their rigs. Please share

And do you prefer air or liquid? Why?

For my uses im going to stick with air, this is the safest route for me and not having to worry..

Im going to get a Noctua CPU cooler and eventually GPU cooler.

Link to comment
https://www.neowin.net/forum/topic/1143636-pc-cooling-air-or-liquid/
Share on other sites

I've seen quite an increase in closed-loop CPU watercooling systems (Corsair Hydro of all calibers, a handful of TTs). Even started recommending them myself (being a Corsair fanboi), because it's so easy (especially H60/H80, which are almost braindead simple) and doesn't really break the bank. Stock fans kind of suck (as in "are loud"), but that's no issue.

However, before hearing bubbling noises now and then right out of the box, and then reading about leaks destroying high-end gear. And now I'm much less enthusiastic. You can't really tell, though, I guess?

First thing I do now - put metal clamps on hoses, because I don't trust the heat sealing. Probably in vain, though - if it does leak, it'll be in the head, especially near the swivels, which, I must say, seems like a patently bad idea.

For SB-E or any AMD I'd still probably go closed-loop. For anything else a decent air cooler (the almost legendary 212 even) would suffice.

For GPU - no idea. Aren't they pretty good as they come, with, say, Windforce and all?

One day I'd love to build a full LC setup, though. The immense factor of cool (both kinds) it brings is unrivaled. Then again, seating the whole thing in mineral oil is even more cool. And about the same distance from being possible.

For me, Air cooled - cheap, easy, and low temperatures. I have an Antec 300, with 4x120mm fan, 1 x140mm fan. My CPU heatsink is the Arctic Freezer 7 Pro Rev. 2 and it idles at 24-30 degrees C, and load tempaeratures in the low 50's. GPU is cooled by the 2 fans that are built in and one of the 120mm case fans, it stays very cool also.

I have a Corsair H50, and you can overclock like a beast with that thing and it keeps it nice and cool. It handles 4.5GHz on my i7 with ease. Never really pushed it further than that though.

It being dead silent is worth it alone.

I use an corsair h80 on my desktop gaming machine and an h60 on my file/hyper-v server. Both are miraculous. the h60 keeps my server running at ~87-90F @ load (ambient is ~75 F) and is nearly silent. the H80 keeps my desktop pretty cool as well, though I don't have #'s off the top of my head. As Phouchg said, they're easy as cake to install, and are very good setups for the cost. (got my h60 for around 50$ and I think 64$ for the 80.)

I've owned several closed loop liquid coolers such as Coolit ECO single and dual fan radiator versions, currently rocking the Antec Kuhler 620. Imho they aren't worth the money, you can get equally good if not better results with a decent tower heatsink if you use decent fans.

The problem with the cheap closed loop watercoolers is that after a while the pump tends to start rattling/gurgling, it's happened to all the ones I've owned so far and its really irritating and spoils the only thing going for watercoolers which is how quiet they are.

I'm thinking of getting a H110i when I up to a 3770K before summer. Really worried about temps, we get above 100F many days in summer here. And to have cooling as well as a decrease in noise, seems like a no-brainer.

I'd really like to get my GPUs cooled as well but until the AIO units can do this easily I won't worry about it.

Is liquid cooling drastically better than air cooling? Comparing an air cooled system where someone has taken advantage of optimal air flow and good cable management and a liquid cooled system, it there a noticeable difference? Or is water cooling just something tech-heads like to do because it is geeky? Like extreme over-clocking.

Water is a superior heat conductor.

The risk of water leaks is what puts me off.

I have a Noctua NH-D14 and my i7-2600K runs between 30 and 39 degrees C at all times.

The water coolers that I've seen are not good enough for me.

I want a NH-D14 to be transformed into a water block. :D

I use a noctua NH-D14 on my 4.4ghz oc 3570k setup. CPU runs mid 20s at idle & mid 50s at max load. After reading horror stories about leaky LC's ruining new builds, I opted for the noctua which offers similar or better performance than a lot of LC's.

Water is a superior heat conductor.

The risk of water leaks is what puts me off.

I have a Noctua NH-D14 and my i7-2600K runs between 30 and 39 degrees C at all times.

The water coolers that I've seen are not good enough for me.

I want a NH-D14 to be transformed into a water block. :D

That is actually the Noctua I was looking at for my CPU, from what I read it is better than most liquid cooling and highly rated.

And there is nothing wrong with my GPU cooling, just think aftermarket would be nice to have on it.

with todays chips if you build a pc correctly you need nothing but stock cooling.

i play anything any game on Ultra settings on a ivy bridge core i3

GTX 670

no need for anything other then stock cooling do not let anyone tell you otherwise my max temps on cpu is 50

and max GPU is 70 under 100% load with stock cooling

The NH-D14 keeps the CPU much cooler and generates less noise at heavy load compared to a stock cooler.

There is nothing wrong with stock coolers, but there are coolers that are much better.

Keeping the stock cooler is up to you, but I rather hear the noise from the actual air flow than the noise from the fan itself. There is a difference between noise and noise.

Air, mainly because it's much cheaper and easier. The overclocking potential with a decent after market cooler is good enough imo.

Also, the performance gain from liquid isn't worth the cost imo, you might as well just get a faster processor. If you get the fastest processor available and want to overclock it even then, you might as well go with liquid because you can probably afford it but you probably don't need the extra power if you've got the fastest processor and you're probably just doing it for the lulz.

Is liquid cooling drastically better than air cooling? Comparing an air cooled system where someone has taken advantage of optimal air flow and good cable management and a liquid cooled system, it there a noticeable difference? Or is water cooling just something tech-heads like to do because it is geeky? Like extreme over-clocking.

Yes it's drastically better (the physics support that) - i've been doing it for about a decade and really I started because I was sick of the noise of air cooling. It is amazing how much temps drop on things like GPUs versus air though - it gives you a lot more headroom for overclocking. Air cooling has come a long way but i'd still stick with my giant rad loops for two 670s in SLI and an overclocked i7 because everything is very quiet and much cooler (longevity, reliability and of course the lack of noise preserves my sanity). When I bench tested the 670s on air it drove me nuts quite quickly - way too noisy for me.

To do it right is very expensive and very time consuming - it's not for the faint hearted but I do enjoy the challenge of doing it (another reason why I still do it today). Changing anything is an adventure(!) So many things can go wrong and there's so much to learn - which is fun!

ish.

Air. 3770K at 4.6Ghz - 75 C at max load.Noctua NH-D14. Water is what you need if temps are limiting (not my case, I'm chip limited), but to get much better than the Noctua you'll need a custom loop which is frankly expensive and a hassle. One day when I have no other hobbies left I might switch to water but for now it's just pointless.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • well you can add a GPU for around $500, that's still around the price of Steam Machine but overall significantly better in performance.
    • Fresh CachyOS install with Niri - I guess it's a little orange, but I'm working on it
    • FastStone Image Viewer 8.5 by Razvan Serea FastStone Image Viewer is a fast, stable, user-friendly image browser, converter and editor. It has a nice array of features that include image viewing, management, comparison, red-eye removal, emailing, resizing, cropping, retouching and color adjustments. Its innovative but intuitive full-screen mode provides quick access to EXIF information, thumbnail browser and major functionalities via hidden toolbars that pop up when your mouse touches the four edges of the screen. Other features include a high quality magnifier and a musical slideshow with 150+ transitional effects, as well as lossless JPEG transitions, drop shadow effects, image annotation, scanner support, histogram and much more. It supports all major graphic formats (BMP, JPEG, JPEG 2000, animated GIF, PNG, PCX, PSD, EPS, TIFF, WMF, ICO and TGA) and popular digital camera RAW formats (CRW, CR2, NEF, PEF, RAF, MRW, ORF, SRF, ARW, SR2, RW2 and DNG). FastStone Image Viewer features: Image browser and viewer with a familiar Windows Explorer-like user interface Support for many popular image formats and PDF viewing True Full Screen viewer with convenient image zoom support and unique fly-out menu panels Crystal-clear and customizable one-click image magnifier Powerful image editing tools: Resize/resample, rotate/flip, crop, sharpen/blur, adjust lighting/colors/curves/levels etc. Eleven re-sampling algorithms to choose from when resizing images Image color effects: gray scale, sepia, negative, Red/Green/Blue adjustment Image special effects: drop shadow, framing, bump map, sketch, oil painting, lens Draw texts, lines, highlights, rectangles, ovals and callout objects on images Clone Stamp and Healing Brush Superior red-eye effect removal/reduction with completely natural looking end result Multi-level Undo/Redo capability Single click to switch between best fit and actual size mode Image management, including file tagging, rating and drag-and-drop to copy/move/re-arrange files Histogram display with color counter feature Compare images side-by-side (up to 4 at a time) to easily cull those forgettable shots Image EXIF metadata support (plus comment editing for JPEGs) Configurable batch processing to convert/rename large or small collections of images Slideshow with 150+ transition effects and music support (MP3, WMA, WAV...) Create efficient image attachments for emailing to family and friends Print images with full page-layout control Create fully configurable contact sheets Create memorable artistic image montages from your family photos for personalized desktop wallpapers (Wallpaper Anywhere) Acquire images from scanners. Support batch scanning to PDF, TIFF, JPEG and PNG Versatile screen capture capability Powerful Save As interface to compare image quality and control generated file size Run favorite external editors with one keystroke from within Image Viewer Offer portable version of the program which can be run from a removable storage device Configurable mouse wheel support Support themes (bright, gray and dark) Support dual-monitor configurations Support touch interface (tap, swipe, pinch) Support dual instances Play video and audio files (Third party codecs may be required for old versions of Windows) And much more... FastStone Image Viewer 8.5 changelog: Added support for SVG format Added Start importing automatically and Handle duplicate file names automatically options to the Import Photos and Videos tool WebP files can now be rotated and saved with a single click Enhanced dark theme support in the PDF viewer Fixed a bug where some links in PDF files were not clickable Other improvements and bug fixes Download: FastStone Image Viewer 8.5 | Portable | ~15.0 MB (Freeware) View: FastStone Image Viewer Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yup, broke my comp… again. its times like this when I regret AMD. This just never happens on NV.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      160
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      85
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!