PC Cooling - Air or Liquid?


Recommended Posts

I just put a Corsair H60 in my setup. Lowered 4.2GHz i7 temps over 10C from my ASUS Lion Square. But LinX benchmark temps went from 79C max to 72C max. The big difference is noise and once load drops temps instantly drop.

I definitely recommend closed loop systems.

I recently got a Corsair Hydro H70. I didn't really need it, but it was only $40.

Before: Zalman CNPS-9500 running cpu stock at 100% for 10 minutes

ZizQ9jL.png

After: Corsair Hydro H70, overclocked 400Mhz, CPU running at 100% for 10 minutes

5RQNLeo.png

Sure it's unnecessary, but for $40 it makes a decent difference.

You should go water cooling but not used a closed system. Air is quick and cheap though.

I run my over clocked i7 / x79 / 32GB with over clocked GPU and when watching movies in the home theater I can not even tell its on. When its time to play games or do something CPU intensive I go to the fan controller and turn up the fans.

Overclocking form 3.6 to 4.5 and with a overclocked GPU my average temperature is only 55c. The case still has its room temperature to it when touched if not cooler.

I have attached a picture of my system and it was worth the extra effort by all means.

post-109068-0-48075200-1364594395.jpg

Nowadays, you don't really need liquid cooling. A good high-end air cooler will do, save power, and have a lot less headaches down the road. Also, you can probably buy quieter fans than a low noise pump. I'm hardcore into silent computing and I've pretty much only used air for my main desktop. I got a water cooled desktop in my basement and it's too "loud" for my likings, haha. In fact, I've replaced every HDD in my main desktop with SSDs just to cut the motor noise... now I have 3 SSDs in there (OCZ Vector 256GB, OCZ Octane 512GB, and a Patriot Pyro SE 240GB). Yes, in the same computer. All my fans are Noctua PWM fans running at low RPMs in normal conditions, and my PSU is a Seasonic Platinum 1000W.

My main PC is a Core i7-3770K overclocked to 4.6GHz. My 'spare' PC with water cooling is a Core i5-2500K overclocked to 4.5GHz.

Nowadays, you don't really need liquid cooling. A good high-end air cooler will do, save power, and have a lot less headaches down the road. Also, you can probably buy quieter fans than a low noise pump. I'm hardcore into silent computing and I've pretty much only used air for my main desktop. I got a water cooled desktop in my basement and it's too "loud" for my likings, haha. In fact, I've replaced every HDD in my main desktop with SSDs just to cut the motor noise... now I have 3 SSDs in there (OCZ Vector 256GB, OCZ Octane 512GB, and a Patriot Pyro SE 240GB). Yes, in the same computer. All my fans are Noctua PWM fans running at low RPMs in normal conditions, and my PSU is a Seasonic Platinum 1000W.

My main PC is a Core i7-3770K overclocked to 4.6GHz. My 'spare' PC with water cooling is a Core i5-2500K overclocked to 4.5GHz.

I can believe it. I think one of the biggest misconceptions surrounding water cooling is that it leads to quiet computing.

The heat still needs to be displaced and most water cooling setups have loud fans for this purpose.

The main domain of water cooling has been and should stay over clocking. The benefit of it is increased cooling efficiency at higher temps not in noise reduction.

I can believe it. I think one of the biggest misconceptions surrounding water cooling is that it leads to quiet computing.

The heat still needs to be displaced and most water cooling setups have loud fans for this purpose.

The main domain of water cooling has been and should stay over clocking. The benefit of it is increased cooling efficiency at higher temps not in noise reduction.

Heh, well it did lead to quieter computing for me - you have the option of a very large rad with big slow spinning fans - the heat is displaced by the large surface area. As I said I tried my 670's on air for a day and it drove me nuts. For me it's quieter, better overclocking headroom and has the nice kicker of dumping all my heat externally to the case too. I don't find pump noise as issue either - it's entirely silent when mounted with appropriate deadening material. Again, YMMV but this is my current setup and i'm very happy with the result as a noise-intolerant individual - but to reiterate i'd steer people clear of it because it's expensive and a lot work. It can lead to very quiet computing but then that's entirely implementation specific - there's a vast range of rads, pumps, fans (or passive), layouts and techniques to consider. In all the years of WCing I don't think i remember every having what i'd term as a loud fan and I think i've only had undervolted fans too.

I've been very impressed with the leaps and bounds air has taken over the years though.

I wouldn't say i'm a bleeding edge overclocker - but when I do need to ramp up the GPUs it's nice to have temps half that of air (at load) as starting point :)

I got an NH-D14 after a bad experience with a Corsair H80 (it leaked... ruined my board). I had the same issue, Dan, but my system supports the massive NH-D14 just fine without flexing the board, and the RAM slots on my board are well-spaced enough, though one stick does sit underneath the huge cooler. I'm using it inside a Fractal R3 mini case and despite the smaller, MATX case size it fits just fine with enough room for everything else.

i could never be bothered to worry about a water cooled system just as much as a water cooled toaster. Its just not needed.

Of course, why would you want to cool something that has been specifically designed to be hot. :rofl:

Xoxide sucks FYI, sent me the freaking wrong CPU cooler when its clearly distinguishable.... Now with their crappy support and no answers, I dont even know when I will see my CPU cooler...

Anyways my GPU cooler should be in a few hours :)

Okay got the Arctic Accelero Hybrid installed and running perfectly!

Installation was what I call intermediate, but it went good. I had to come up with my own way on the "adhesive tape and washers".

The thermal glue was dried out about 1/4 through the bottle, but I went and bought some.

My setup is:

i5-3570K on stock cooler for now, awaiting my DH-14

EVGA GTX 680 4GB

Dont mind my crappy quality photos, I plan on tidying the inside once I get my CPU cooler, to plan the space more.

IMG_20130411_150153.jpg?async

The parts and GTX 680 before it gets taken apart

IMG_20130411_151306.jpg?async

Plates are off

IMG_20130411_153308.jpg?async

PCB

IMG_20130411_212523.jpg?async

Some heatsinks installed

IMG_20130412_160936.jpg?async

Rest of them installed

IMG_20130412_170655.jpg?async

Unit installed pic from back view

IMG_20130412_170739.jpg?async

Front view

IMG_20130412_170745.jpg?async

Front view 2

IMG_20130412_183003.jpg?async

In the tower.. sorry for quality and sideways

Idle temps are now 28-35 degrees Celsius, before was always around 35.

On games like Crysis 3 pretty much maxed out it goes to 40-45 degrees Celcius, before 65-80

Same things with most high demand games I have now

Tried this program called Heaven Benchmark 4 and got it pushed up to close to 60 degress Celsius

Oh it is quieter all throughout especially on heavy processing than the stock.

Overall happy so far

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Meta launches new AI glasses in 26 styles and Muse Spark multimodal capabilties by Pradeep Viswanathan Meta today announced a new line of Meta Glasses in partnership with EssilorLuxottica. The new AI glasses build on the company’s existing smart glasses portfolio, which is sold under the Ray-Ban Meta and Oakley Meta brands. The new Meta Glasses start at just $299, are compatible with prescription lenses, and will be available in 26 styles across different colors, lenses, and frames. At launch, Meta Glasses will be available in three frame styles. The Meta Adventurer features a clean rectangular design and comes in Standard and Large sizes. The Meta Fury is a bolder frame for users who want a stronger look. Meta Glasses by Kylie is a slim oval frame designed in collaboration with Kylie Jenner. Similar to existing Meta AI Glasses, the new Meta Glasses include a dedicated action button that can be used to quickly access Meta AI or launch a favorite feature. They also feature open-ear speakers for calls, music, and more. Meta has also included a multi-mic array with wind noise reduction for calls and messaging. Users can capture photos and videos hands-free using voice commands. Meta claims more than eight hours of battery life, while the portable charging case can provide up to 40 additional hours. As expected, Meta Glasses come pre-loaded with Meta AI powered by Muse Spark from day one. Muse Spark is the first model from Meta Superintelligence Labs with improved multimodal capabilities. The same Meta AI upgrade is also now available on existing Ray-Ban Meta and Oakley Meta Glasses in the US and Canada via an update. With the Muse Spark-powered AI assistant, Meta AI in the new glasses can provide smarter answers, understand what the user is seeing, and help with daily tasks such as calendar management and navigation. Meta also announced an upcoming feature called the dynamic photo feature, which captures multiple frames and recommends the best one. Pedestrian navigation is also coming soon to these glasses. Meta is also adding support for 14 new live translation languages, including Japanese, Mandarin Chinese, Hindi, and Korean. The new Meta Glasses are available starting today through Meta.com, Best Buy, Amazon, LensCrafters, Sunglass Hut, and select retailers.
    • is that a personal preference? whether it is or isn't, i get where you're coming from. i try to get and use fully open sourced applications whenever i can but there are instances where i find a superior product that is closed sourced. in these cases i do my best to learn about the company, who operates it, their background, parent and sub structure etc. to some extent, depending on "the smell test". i really believe that Syncback is really and truly something great. even if you don't use it, it's always worth a recommendation to someone else, especially if that someone else is not very computer literate. for someone of your calibre you, you'll manage just fine with Syncthing, no doubt about it.
    • I agree, especially if it is cloud sourced, like this one is.. but I wouldn't say no to a local AI assistant similar to the Zettlab one which would be really helpful with my large Photos library, but also to perform tasks like installing Docker apps rather than me having to do it via Docker Compose, but I don't think we're quite there yet. Synology Photos is somewhat AI, you can ask it to search for certain people (if you have tagged them and it will attempt to match similar photos to the person) and if you put a search term in for "cars" for example, it will show you all photos with a car.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      476
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      105
    4. 4
      Michael Scrip
      88
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!