Solar Phone Charging recommendations


Recommended Posts

Hey guys

Looking for some advice, I am heading on a week long backpacking trip in a few weeks and bring my Lumia 810 with me for emergency purposes. I am looking for a reliable solar charger to bring with me that does around 1.3 amps (lumia rating). Has anyone had any experience with solar chargers and could recommend one?

I have one of these

http://www.amazon.com/Veho-VCC-A008-PBP-XT-Portable-5000mAH-Smartphones/dp/B003YNT3TO/ref=sr_1_1?ie=UTF8&qid=1365596314&sr=8-1&keywords=pebble+charger

Not sure how battery hungry the Lumia is but I get almost 3 full charges from it on my Xperia S. I'd prefer one of these compared to the AA/AAA solutions you've been advised towards. You say you'd only use in emergency purposes anyway so this would be more than ideal.

Awesome, Thanks I will check that out. I was sort of advised towards the AA/AAA solution because I could pack a bunch of batteries if a set runs out, the drawback is weight in my pack. Would 5000 mAH get me through 6 - 7 days?

How long does your battery normally last?

GSM Arena says

Li-Ion 1800 mAh battery

So you would get about 2 and half FULL charges (slightly more) from the power pack.

Failing that I've noticed these products get good reviews on Amazon and varying capacities

http://www.amazon.co...rGen+PGMPP12000

Or even

http://www.amazon.com/Lightning-Thunderbolt-Blackberry-connectors-customized/dp/B009USAJCC/ref=pd_cp_cps_0

I would just steer away from a battery solution as this is way it's a high capacity rechargable method without the need to keep replacing the batteries and carry extra bulk.

Right now I can go 1-2 days on a full charge depending on what I am doing, the main issue I have is that most of these chargers are 1 amp only.

That was my concern with a lot of them as well. I recently purchased the Jackery Bar charger on Amazon after seeing it on Engadget (http://www.amazon.co...0?ie=UTF8&psc=1). The Bar is 5600 mAh and that gives me... well I haven't really used it enough to be certain, but probably more like 2 charges on my One XL with an 1800 mAh battery. You will never get 5600mAh/1800mAh charges out of it because of loss in the circuit and conversions and interesting electronics math and details that I can't think of now at midnight while I'm still at work, so let's say 2 full charges. BUT, it charges at 2.1A, so it's as fast as any wall outlet (2.1A is more than most phones pull at max still I believe, it's good for tablets too).

They also have the Jackery Giant that's 10400 mAh (http://www.amazon.co...m=AZF6YB7UVA7OU) if you want to make sure you can make it the week.

I like mine so far, but like I said, I haven't used it too much to give a full review. They say they have extra technology to make it keep a charge longer than most litium batteries. The build quality is very nice, and it has a built in, fairly bright 2 led flashlight that would last a stupidly long amount of time with 5600 or 10400 mAh behind it. Could be useful as well.

As for solar, I've looked into building my own solar charger before, and you're going to need decent sized panels to get a fast charge, otherwise solar is going to be more like a trickle charge. It may keep you charged if you keep it plugged in, but I was looking at doing two panels the size of a CD case, in a CD case, and it wasn't going to be close to 1A, even with both.

Edit: Oh, I forgot, the Giant has a 2.1A and a 1A charger port. In case you need it for anyone else too.

A friend let me borrow his Goal Zero Nomad 7, tried it out at the park today. Its supposed to only charge at 1 amp, but my Lumia was charging just fine as well as with the battery they included with the kit. Kind of odd since a 1 amp car usb charger won't work for the phone.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      590
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!