[n00b Guide]Compiling Upstream Kernel with CPU Optimizations

[+John Teacake MVC]

OK So below is my guide for you to all compile the latest Linux Kernel from https://www.kernel.org/ built with your CPU in mind.

This is intended for guys like me who were curious about this kind of thing, Meant to be as simple as possible so you can practically copy and paste the commands to your terminal.

  Quote

*All the following you MUST be run as root. on Ubuntu

sudo -su[/CODE]

*This works on the latest versions of Ubuntu.

First lets install all the pre reqs.

[CODE]sudo apt-get install kernel-package fakeroot build-essential ncurses-dev[/CODE]

After you have installed all the pre reqs, You need to set your optimizations.

To check your processor ...

[CODE]

cat /proc/cpuinfo


[/CODE]

In your terminal. Read this and pick out your CPU Type and Adjust Accordingly. For Mine it is an i7 :D

http://gcc.gnu.org/o...64-Options.html

[CODE]export CONCURRENCY_LEVEL=8
export CFLAGS="-march=corei7-avx -O3 -pipe"
export CXXFLAGS="$CFLAGS"[/CODE]

I will explain these:

CONCURRENCY_LEVEL, for some programs, mainly the program we will be using to build the kernel the "debian" way, it is capable of using multiple cores, with this variable set to the number of cores of your CPU, it will use all of them when compiling the kernel.

CHOST, this variable is for gcc, the compiler used in Linux. This line tells gcc what architecture to build for. this is currently set for Intel/AMD x86_64 cpu's and 64 bit distro's, if you are building for a 32 bit distro, use CHOST="i686-pc-Linux-gnu", instead. This flag isn't always needed, you can exclude it if you want. * I have removed this as its not needed

CFLAGS, these are compile flags, mainly for optimization for the binary. -march, the family of your CPU, latest versions of GCC can auto detect these features, setting it to native is suitable in most cases. Setting -march allows GCC to compile the code to take advantage of any feature of your CPU. -O2 and -pipe, are another optimization flag. There are more flags, but these are "generic" ones used, that offer a decent amount of benefits, I'm afraid going into more detail, is beyond the scope of this guide.

CXXFLAGS, extra flags for GCC, typically you can set them to CFLAGS, which has be done here.

Keep the terminal open, as everything you will be doing will require it. (if you close the terminal, you will need to export those variables again.)

Next Make a tmp directory. This will be used to unpack and build the kernel. Wherever you like. A suggestion is....

[CODE]mkdir ~/tmp
cd ~/tmp[/CODE]

Download the latest Kernel from Kernel.org.

[CODE]wget https://www.kernel.org/pub/linux/kernel/v3.x/testing/linux-3.9-rc8.tar.xz[/CODE]

Unpack it....

[CODE]tar xvf linux-3.9-rc8.tar.xz[/CODE]

Move into your directory and build your config file. Now here I suggested building your default one. I have heavily modified mine and taken alot of the stuff out to make it as stream lined as possible. You will be asked a lot of questions, How many depends on what version you are building. If in doubt, pick the default answer (i.e. hit enter). If really in doubt, use post here.

[CODE]cd linux-3.9-rc8/
cat /boot/config-`uname -r`>.config
make oldconfig
make-kpkg clean[/CODE]

For the more adventerous amongst you, I suggest you familiarize yourself with the Menu Config. If I remember I will post my .config file for you to download. However it is built for a Sony VAIO Laptop. So... if you want to make any specific changes to the kernel (e.g. add support for certain devices) ...

[CODE]make menuconfig[/CODE]

Then the fun part. Building the kernel.

[CODE]time fakeroot make-kpkg -j8 --initrd kernel_image kernel_header[/CODE]

*As usual 8 is the number of threads you wish to launch -- make it equal to the number of cores that you have for optimum performance.

If you get it under 30mins on an i7 You are doing well. Sit back and enjoy...

After all the good stuff, Install your new shiny built kernel.

[CODE]
cd ..
sudo dpkg -i linux-image-*.deb
sudo dpkg -i linux-headers-*.deb
[/CODE]

You should also see it update the GRUB Boot loader so it boots right into your new kernel. Reboot and enjoy.

You can see here on how to test your performance...https://www.neowin.net/forum/topic/1148290-cpu-optimizations/

Further Reading ...

http://freecode.com/...myths-and-facts

  Quote

v1.0 - Created :)

[fusi0n]

Great work!!!!

[+John Teacake MVC]

Thanks! Hopefully someone will find it useful.

[+Majesticmerc MVC]

Nice work dude! Might give this a try at some point. Have you noticed any significant improvement?

[+John Teacake MVC]

I can honestly say that my system feels much more snappier loading programs up. Not that it was slow in the first place. My true test is going to be when I am doing BOINC work for example.

[+John Teacake MVC]

Just noticed

[s]time fakeroot make-kpkg -j8 --initrd kernel_image kernel_header[/s][/CODE]

Should read

[CODE]time fakeroot make-kpkg -j8 --initrd kernel_image kernel_headers[/CODE]

[+John Teacake MVC]

Any chance we could make this a Sticky?

[Karl L.]

  On 30/04/2013 at 10:34, ChuckFinley said:

Any chance we could make this a Sticky?

I think you would need to PM a mod for that... or a mod could visit this thread and see your comment, but there are not may mods who visit this subforum AFAIK. While useful, I don't think that this guide should be made a sticky. It would be nice to move it to the "HOW TO & FAQ Guides" subforum of this subforum though; then it would be with all of the other useful guides and easier to find in the future (which I think was your goal with making it a sticky).

[+ir0nw0lf Subscriber²]

OP, 2nd link in your post is borked... "http://gcc.gnu.org/o...64-Options.html"

[xxxxxx.xxxxxx]

Good work Chuck, hopefully this will help people who often distro jump just for a newer kernel :)

I agree with xorangekiller not really worthy of a sticky, but definitely should be moved to the HowTo subforum.

[+John Teacake MVC]

  On 30/04/2013 at 15:41, xorangekiller said:

I think you would need to PM a mod for that... or a mod could visit this thread and see your comment, but there are not may mods who visit this subforum AFAIK. While useful, I don't think that this guide should be made a sticky. It would be nice to move it to the "HOW TO & FAQ Guides" subforum of this subforum though; then it would be with all of the other useful guides and easier to find in the future (which I think was your goal with making it a sticky).

  On 30/04/2013 at 18:43, sean.ferguson said:

Good work Chuck, hopefully this will help people who often distro jump just for a newer kernel :)

I agree with xorangekiller not really worthy of a sticky, but definitely should be moved to the HowTo subforum.

Yeah makes sense!

  On 30/04/2013 at 15:49, ir0nw0lf said:

OP, 2nd link in your post is borked... "http://gcc.gnu.org/o...64-Options.html"

For some reason I cant edit it. But this is the link.

http://gcc.gnu.org/onlinedocs/gcc/i386-and-x86_002d64-Options.html

[+John Teacake MVC]

Bumping this as I am using it to compile the Kernel on ElementaryOS. However the newer kernels have trackpad bugs on my Sony VAIO :-(

[+John Teacake MVC]

Bump! 

 

This method still works well with newer kernels too. 

[Mindovermaster Global Moderator]

Why bump this? I see you are the OP, but still. It's almost a year old.

[+John Teacake MVC]

Incase anyone else finds it useful! :-p Things tend to get lost. 

[Mindovermaster Global Moderator]

Why do members always seem to dig up old threads? It isn't hard to find.

[simonlang]

way too complex and i suspect no one interested in kernel updates would go this long and uneasy to follow tutorial.

either use the mainline ubuntu ppa kernels where you just need to download and dpkg 3 files then reboot, or someone finally makes the kernelpatcher tool which was running fine till the 2.6 kernels up2date....

 

i think especially stuff like kernel update needs to be implemented in an easy usable tool. no one has an interest to copy and paste endless lines into the terminal and even additionally open links in his webbrowser.