Recommended Posts

My laptop is crippled at the moment, when I log in, a window takes over 100% of screen real estate, I cannot open or see TASK MANAGER. It is scareware of some kind.

A picture of hand cuffs, threatening me to pay up or you will lose internet access. My guess is that is the newest version of the fake "Antivirus" family, eg: Antivirus 2007, Antivirus 2008, Antivirus XP.

And system restore, fails, of course.

OS: Windows 7 Starter Edition

Link to comment
https://www.neowin.net/forum/topic/1149774-unknown-scareware/
Share on other sites

As stated above boot into safemode with networking, download Malwarebytes and have a scan with it, should pick up. After that I'd suggest running TDSS Killer, usually gets rid of any remaining traces.

Also you could try googling some of the text from it.

This crap usually is located as a single random exe in one of the following locations

c:\users\(username)

c:\users\(username)\appdata\roaming

c:\users\(username)\appdata\local

c:\programdata

Boot into safe mode and unhide system files and hidden files and check those locations for exes. Also do a windows key + R and type msconfig. The nasty is usually listed in there as it starts with the PC. Once you find it in the list it should tell you its location. Go to that location and delete the offending exe file.

What about those who can't even boot into safe mode ?

You could try Kaspersky's Rescue Disk, boot into it and see if you can remove the infection via it or at least make the OS bootable.

https://support.kaspersky.com/4162

Or as Warwagon suggested grab a Linux distro and try and remove the infection manually.

If you cannot boot into Safe mode (ensure you try Safe mode with COMMAND prompt as this generally does still work), you will need a LiveCD (Linux, Hirens, Vista, 7, etc).

For Vista/7 go to %appdata% for the User account that is infected and delete the Skype.ini and Skype.dat files. Then go to %programdata% and delete any .exe/.sys files from the bottom of the list. If there are .sys files you may need to use "attrib" to remove hidden/system file attributes before you can delete them.

For XP: Check %appdata% in the User account that has the infection coming up for the same files/file types as above. If you do not see any here go up one directory and then Local Settings\Application Data and check there. If nothing is still found you can navigate to All Users and go through Application Data there.

Also if Safe mode Command Prompt works you can use:

net user /add useraccountname mypassword

net localgroup administrators useraccountname /add

to create a new account, which generally gets you into the machine from where you can access the above locations to clean out your infected account

  • Like 1

I was able to use KRT but didn't find anything.

Just tried Hiren's. Damn that iso has changed since v10. was unsuccessful to run any programs. Need to look at that disk again.

I was about to try Windows Defender Offline Boot disk. But I was booted into desktop with the 100% display. After getting to the shutdown the 100% display went away and SOMEHOW was able to stop the shutdown process. I have now just installed Malwarebyetes and am doing a scan. 2% done and 15 infected files found :|

I am doing the scan NOT in safe mode. Does that matter.

... Sorry. I haven't had a virus for a good 5 years. And this one seems to be hardcore. Its my dads computer with a lot of important stuff. If it were my computer I would have formatted and installed Windows 7 about 4 hours ago :p

You could try Kaspersky's Rescue Disk, boot into it and see if you can remove the infection via it or at least make the OS bootable.

https://support.kaspersky.com/4162

Or as Warwagon suggested grab a Linux distro and try and remove the infection manually.

Ive used Kapersky to remove the fake Met police scareware with great success. I use it professionally as its quicker than other methods. Most are a theme on the FBI one.

Trend also do a live rescue cd IIRC failing that avast or Avg do a similar utility.

Burn the iso to disk or even better usb stick and boot from it (via bios boot order) and follow the prompts.

Remember to allow it to update its defs in its live environment if it detects your lan or wifi card

Not running in safe mode isn't an issue, that's just to try and get around the screen lock.

After MalwareBytes, I'd run whatever other AV/AM tools you like and just make sure you got everything.

Personally after this kind of infection I always format, I'd just rather not to take the risk. Entirely up to you though >.<

I don't know about this malware but I have been able to move the malware screen off to one side of the machine (not completely off) and any other windows that pop up I stack them on top of each other. This gives me access to the start button and an open place on the desktop to work from.

Not running in safe mode isn't an issue, that's just to try and get around the screen lock.

After MalwareBytes, I'd run whatever other AV/AM tools you like and just make sure you got everything.

Personally after this kind of infection I always format, I'd just rather not to take the risk. Entirely up to you though >.<

Yeah. My dad should have fixed this himself just to teach him a lesson.

IE8 user, uses random crappy AV and other software, has a TON of files (all of which are located on C: ) .. and hasn't done a Windows update in over a year.

If it were me, I would have formatted C and reinstalled everything. It would have only taken 45mins to do, and I wouldn't have any files lost since everything is stored on my D partition :)

But, it was fun having to deal with a virus for the first time in a few years.

Yeah. My dad should have fixed this himself just to teach him a lesson.

IE8 user, uses random crappy AV and other software, has a TON of files (all of which are located on C: ) .. and hasn't done a Windows update in over a year.

If it were me, I would have formatted C and reinstalled everything. It would have only taken 45mins to do, and I wouldn't have any files lost since everything is stored on my D partition :)

But, it was fun having to deal with a virus for the first time in a few years.

why didn't you just LiveCD and pull all his data off, then nuke it?

Is it the FBI virus ?

I am not sure, I never heard of this FBI virus before. Another Scam, isn't it ?

I went into safe mode, I seemed to have cleared out the scareware. One further Attempt to restore to a previous state, resulted in a strange BSOD, that had a countdown timer.

Laptop is running again, no clue though, which SCAREWARE stuck. I bet it was a drive by injection/infection.

This topic is now closed to further replies.
  • Posts

    • About bloody time. I have got PRs with hundred of files and the Web UI just struggling to even load the pages.
    • I wonder if it was applying secure boot certificates/dbx files?
    • I recently tried edge. It seems a lot better. A lot of the junk in it is gone. It seems less bloated and snappy.
    • Lethal fake phone chargers are still being sold on Amazon and eBay, UK watchdog warns by Paul Hill Credit: Pexels The UK consumer rights organization, Which?, is claiming that “potentially lethal knock-off chargers” are still being sold on online marketplaces seven years after it exposed the danger of these chargers. In its latest investigation, it bought 15 USB phone chargers from several online marketplaces and found they were missing key information, meaning they cannot be legally sold in the UK. Which? bought the 15 chargers from seven online marketplaces. These were Amazon (including Amazon Haul), AliExpress, B&Q Marketplace, Debenhams Marketplace, and eBay. It said that the chargers were so badly made that anyone using them was at risk of electric shock. Over half the chargers also posed fire and explosion risks. Of the chargers purchased, one was a fake Apple USB-C 35W power adaptor charger. To confuse buyers, the box was branded with an Apple logo, but testing found it to be a fake. Further testing picked up arcing sounds after 10 seconds of use, where a current jumps between two parts of the electrical circuit, which can cause fires, explosions, or electric shock. The manufacturers of this particular charger also put modeling clay inside it to make it feel more weighty, robust, and genuine. Not all of the chargers were technically faulty; however, some were missing key packaging, markings, and documentation, meaning they can’t be sold in the UK legally. Which? said that it is now campaigning alongside a coalition of safety groups and businesses for new laws that make online marketplaces responsible for ensuring the safety of products that they choose to list on their websites. It also said the government needs to start using powers under the Product Regulation and Metrology Act, which was adopted last July, to impose safety requirements on online marketplaces via secondary legislation, but so far, there have been delays. No matter what country you are in, be sure to properly research what you are buying and only buy authentic chargers to prevent fires. You can read more about Which?’s research here.
    • Visual Studio finally gets long-awaited feature that developers will love by Usama Jawad Visual Studio Code is Microsoft's popular, lightweight, open-source code editor, it is actually Visual Studio that is the company's flagship integrated development environment (IDE). Although the IDE already offers a boatload of useful features for developers, Microsoft has finally introduced a long-requested capability that will be loved by many. While developers have already been able to create Git pull requests (PRs) directly within Visual Studio for the past couple of years, it had not been possible to review a PR without switching to the browser, until now. Microsoft revealed in December 2025 that it is working on UX that enables developers to do just that, and fast-forward to June 2026, and Visual Studio finally has native capabilities to open and inspect a PR, discuss feedback, and wrap up the review, all without switching to the browser. This integration works for both GitHub and Azure DevOps (including on-prem). Developers have access to multiple surfaces to open a PR, including Git Repository, Git Changes, and the Git menu in Visual Studio. Once you open a PR, all the important details will be immediately visible to you, from where you can navigate to various levels of granularity and branch states, depending on the reviews that you are engaged in. As you would expect, you also get a diff view that enables you to see code changes inline or side-by-side in a separate panel. You can also review commit-by-commit. Additionally, this UX fosters collaboration as you can leave comments, reply to threads, and resolve conversations easily. Naturally, you can also leverage Copilot to apply a code suggestion to fix a potential issue. When you are done, you have the ability to approve, complete, and merge the PR. This is a pretty major feature as it has been requested heavily for the past few years. You can try it out in Visual Studio 2026 version 18.7, made available here recently. Microsoft plans to enhance this experience further in future releases with comment filtering, a timeline of PR activity, and more.
  • Recent Achievements

    • Week One Done
      Timaximus earned a badge
      Week One Done
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
    • Week One Done
      davidbazooked earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      PsYcHoKiLLa
      174
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!