Recommended Posts

Just weird that as many ditros as I've tried, I've never come across one that didn't have sudo installed from the get go. I usually stick with debian/slackware based distros. I guess this stable version of Debian IS way behind the times!!

Wheezy is new. It's Squeeze (6.0) that's the old stable version. :)

Just weird that as many ditros as I've tried, I've never come across one that didn't have sudo installed from the get go. I usually stick with debian/slackware based distros. I guess this stable version of Debian IS way behind the times!!

I don't recall debian ever having sudo installed by default. If you use a derivative - that derivative probably installed it.

Personally, I only really use linux for servers, and I'd never put unstable/not thoroughly tested software into production - hence why I stick to the stable branch.

Just weird that as many ditros as I've tried, I've never come across one that didn't have sudo installed from the get go. I usually stick with debian/slackware based distros. I guess this stable version of Debian IS way behind the times!!

Debian has sudo, just you aren't added to the sudo user by default.

Debian has sudo, just you aren't added to the sudo user by default.

I had to install it manually when i installed Debian 7 with XFCE

I am really liking Debian, i moved from fedora after getting annoyed with little things going wrong

Debian seems faster and a lot more stable

I had to install it manually when i installed Debian 7 with XFCE

I am really liking Debian, i moved from fedora after getting annoyed with little things going wrong

Debian seems faster and a lot more stable

Ah, because it is installed in Gnome. That might be it.

I had to install it manually when i installed Debian 7 with XFCE

I am really liking Debian, i moved from fedora after getting annoyed with little things going wrong

Debian seems faster and a lot more stable

Yes,

That's what I used also, XFCE. Personally, don't care if I have to use su or sudo, just caught me off guard and I SUCK at the command line anyway. In fact, despise it!!

Would you recommend this for a Linux noob?

I'm using Ubuntu and have also tried out Linux Mint.

I'd recommend ANYTHING over that bloated Ubuntu!! It's not bad for getting your feet wet, but that's about it, IMO.

I'm gone for now folks but DEFINITELY appreciate the replies and help!! :)

Thank you

While it is certainly possible to install Debian without sudo, the Debian Installer will install it for you and give the user you setup during the installation sudo privileges if you do not enter a root password when prompted by the installer (effectively preventing anyone from logging into the root account directly). Although this behavior is clearly noted in both the installation manual and in the description of the root password box in the installer itself, I can understand how you missed it; many people do. Also, while it is possible to add yourself directly to the sudoers file via visudo like many others have mentioned, there is a much easier method provided by the default Debian sudoers file: the sudo group. Rather than editing the file directly, all you must do is add any user you wish to have administrative privileges to the sudo group.


# Become root.
su -

# Install sudo and its optional support packages.
apt-get install sudo gksu

# Add yourself to the sudo group if you have not done so already. This must be done from a root prompt.
usermod -a -G sudo cork1958

# Reboot to make the changes take affect.
# Technically a reboot is not necessary, but there would be more steps if you did not reboot; this is easier.
reboot

# gksu is the utility that graphically prompts for superuser access before launching applications or changing settings that require elevated privileges.
# When you specify a root password in the installer, gksu will be configured to prompt for a root password.
# With sudo enabled you want gksu to prompt for your user password instead, then try to elevate privileges using sudo.
# Run gksu-properties and change "Authentication mode" to "sudo" and "Grab mode" to "enable".
# This must be run as your user, NOT as root.
gksu-properties
[/CODE]

Holy smokes!

You made that so simple xorangekiller, a monkey could've followed that! And I did!! :)

You obviously read the part where I said I'm a completer command line illiterate and despise it. That's wording it a little strong, but I'm just not into that.

Now, back tot that flash issue.

Thank you

Well, I sure as heck hope he's good enough, or anyone else, to help get this flash player issue resolved. ;)

Really liking this distro of Linux and would hate to get so frustrated that I resort to reinstalling Windows back on this machine. This machine is flying faster than it ever has. It's never really any version of Windows I've had on it, for some reason. Personally, I think this crap AMD processor is the culprit.

Now, back tot that flash issue.

I can give you a procedure for installing Adobe Flash Player 10.3 on your computer, but I need a few more details first. Are you running the 32-bit (i386) or 64-bit (AMD64) version of Wheezy? Which browser do you primarily use?

32bit, (i386), Wheezy and use Iceweasel, Opera and Chrome about equally. Actually, probably Opera mostly.

Hope you can make this as easy as that first procedure! Atually, I know it's not totally difficult, but like I said before I'm TOTALLY illiterate with command line stuff!

Thank you

I'm still not convinced that installing an old version of Adobe Flash Player is the right solution, but I do have a method for installing Adobe Flash Player 10.3 for Opera 12.15 in Debian Wheezy i386.

Sources:

Opera 12.15 for Linux i386

Archived versions of Adobe Flash Player

Installation of Plug-ins for Opera on Linux

Procedure:


# Optionally move to your downloads folder before you start to download anything.
# Even if you chose not to do this, you will still need to be in a writable directory (such as /tmp or ~).
cd ~/Downloads

# Install the latest version of Opera 12.
# Obviously if you already have Opera installed you may skip this step.
wget http://mirror.us.leaseweb.net/opera/linux/1215/opera_12.15.1748_i386.deb
sudo apt-get install gdebi
sudo gdebi -n opera_12.15.1748_i386.deb

# Remove the latest version of Adobe Flash Player from the repository.
sudo apt-get purge flashplugin-nonfree

# Install the latest archived version of Adobe Flash Player 10.3.
# Although it would be possible to install it for all browsers, it is somewhat simpler to install it locally for a single browser.
# In this case we will install it specifically for the current user's installation of Opera 12.
wget http://download.macromedia.com/pub/flashplayer/installers/archive/fp_10.3.183.86_archive.zip
unzip fp_10.3.183.86_archive.zip
pushd fp_10.3.183.86_archive/10_3_r183_86
tar -xzf flashplayer_10_3r183_86_linux.tar.gz
mkdir -p ~/.opera/plugins
cp libflashplayer.so ~/.opera/plugins
popd
rm -rf fp_10.3.183.86_archive

# Open Opera and navigate to the plugins page.
# After a few seconds you should see "Shockwave Flash 10.3 r183" listed as an installed plugin.
opera 'opera:plugins'
[/CODE]

[b]Screenshot:[/b]

bd7de2955905f66c21ba8a5c904b1f93.png

I hear you there about this NOT being the best thing to do as we all know how insecure/buggy flash has always been, but I do need it for my weather sites. In one of my searches for trying to figure this out on my own, as far as flash on a computer that doesn't have/support SSE, I think I remember seeing where this has been a known issue for over 2 years? Ridiculous, if I'm remembering correctly.

I thank you very much for the help and will let you know how it turns out. Could take a few days before I'm back on that computer, but will let you know, regardless. If I get up early enough tomorrow, might have time to try it then.

Thanks again!!

Is 3d acceleration working correctly with virtual machines yet? For a while, you'd get no background and other effects. I installed latest Ubuntu but now the previous missing parts are displaying but it's not displaying the mouse.

I've had decent results with VMWare anyway, both Linux guest, Winders host and the other way around... even did some passable gaming as a larf in a Win8 VM. VirtualBox is workable too but (at least on my hardware) VMWare's 3D acceleration is much better and gave me a lot less headaches.

Is it possible during the installation process to add/change repositories, and install non-free items (Intel iwl4965 WiFi card, Ricoh R5C822 card reader)?

Yes, you can add non-free firmware during installation. There are netboot images available that have the firmware available, or you can download it from here and place it in the firmware directory on a flash drive to make it available during installation.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I recently tried edge. It seems a lot better. A lot of the junk in it is gone. It seems less bloated and snappy.
    • Lethal fake phone chargers are still being sold on Amazon and eBay, UK watchdog warns by Paul Hill Credit: Pexels The UK consumer rights organization, Which?, is claiming that “potentially lethal knock-off chargers” are still being sold on online marketplaces seven years after it exposed the danger of these chargers. In its latest investigation, it bought 15 USB phone chargers from several online marketplaces and found they were missing key information, meaning they cannot be legally sold in the UK. Which? bought the 15 chargers from seven online marketplaces. These were Amazon (including Amazon Haul), AliExpress, B&Q Marketplace, Debenhams Marketplace, and eBay. It said that the chargers were so badly made that anyone using them was at risk of electric shock. Over half the chargers also posed fire and explosion risks. Of the chargers purchased, one was a fake Apple USB-C 35W power adaptor charger. To confuse buyers, the box was branded with an Apple logo, but testing found it to be a fake. Further testing picked up arcing sounds after 10 seconds of use, where a current jumps between two parts of the electrical circuit, which can cause fires, explosions, or electric shock. The manufacturers of this particular charger also put modeling clay inside it to make it feel more weighty, robust, and genuine. Not all of the chargers were technically faulty; however, some were missing key packaging, markings, and documentation, meaning they can’t be sold in the UK legally. Which? said that it is now campaigning alongside a coalition of safety groups and businesses for new laws that make online marketplaces responsible for ensuring the safety of products that they choose to list on their websites. It also said the government needs to start using powers under the Product Regulation and Metrology Act, which was adopted last July, to impose safety requirements on online marketplaces via secondary legislation, but so far, there have been delays. No matter what country you are in, be sure to properly research what you are buying and only buy authentic chargers to prevent fires. You can read more about Which?’s research here.
    • Visual Studio finally gets long-awaited feature that developers will love by Usama Jawad Visual Studio Code is Microsoft's popular, lightweight, open-source code editor, it is actually Visual Studio that is the company's flagship integrated development environment (IDE). Although the IDE already offers a boatload of useful features for developers, Microsoft has finally introduced a long-requested capability that will be loved by many. While developers have already been able to create Git pull requests (PRs) directly within Visual Studio for the past couple of years, it had not been possible to review a PR without switching to the browser, until now. Microsoft revealed in December 2025 that it is working on UX that enables developers to do just that, and fast-forward to June 2026, and Visual Studio finally has native capabilities to open and inspect a PR, discuss feedback, and wrap up the review, all without switching to the browser. This integration works for both GitHub and Azure DevOps (including on-prem). Developers have access to multiple surfaces to open a PR, including Git Repository, Git Changes, and the Git menu in Visual Studio. Once you open a PR, all the important details will be immediately visible to you, from where you can navigate to various levels of granularity and branch states, depending on the reviews that you are engaged in. As you would expect, you also get a diff view that enables you to see code changes inline or side-by-side in a separate panel. You can also review commit-by-commit. Additionally, this UX fosters collaboration as you can leave comments, reply to threads, and resolve conversations easily. Naturally, you can also leverage Copilot to apply a code suggestion to fix a potential issue. When you are done, you have the ability to approve, complete, and merge the PR. This is a pretty major feature as it has been requested heavily for the past few years. You can try it out in Visual Studio 2026 version 18.7, made available here recently. Microsoft plans to enhance this experience further in future releases with comment filtering, a timeline of PR activity, and more.
    • This AdGuard Family lifetime deal is still only $15.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 90% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $15.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $15.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • the MCT currently downloads 26200.8653, so not completely up to date.
  • Recent Achievements

    • Week One Done
      Timaximus earned a badge
      Week One Done
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
    • Week One Done
      davidbazooked earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      PsYcHoKiLLa
      175
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!