My Win 8 got deactivated, how to reactivate...one more question..


Recommended Posts

I had my laptop fixed and Win 7 was put back on by my OEM, I put Win 8 on it, and by playing with some applications while I was putting everything back on it it now says it's deactivated and when go to Windows activation click the activate button I get a error code: 0x8007232B and DNS name does not exist. I have a legit key so I don't quite understand.

And part 2 of my question, when I tried to a clean install of Win8 it wouldn't let me telling me that the primary partition couldn't be used. the only thing I could do was do a Win 7 to Win 8 upgrade. When I first got this machine in Oct of last year, I don't think it did that when I put Win 8 on it, I could be wrong, I can't remember. But I still want to do a clean install before I put too much stuff on it. Thanks in advance.

So should I back up that partition, I have an external harddrive.

I guess that's a personal preference thing. I don't particularly care about those built-in restore systems; I usually format the drive cleanly and just install the OS over it. I've never found those recovery systems to be worthwhile. (But that's just me, you should make a backup anyway just to feel safe)

As for your other screen shot there ^ I would just click OK for MBR, it should be fine.

Try to use DISKPART.

Open CMD as administrator and start Diskpart.

Type HELP for a list of commands.

LIST will help you list your disks, volumes etc.

There are some attributes that should protect from being deleted. If you can't delete a partition, then you could do a force deletion through DISKPART.

There are plenty of DISKPART examples on the web. The ATTRIBUTES command will allow you to read and write attributes.

I'm not familiar how the GUI version works. If a partitioning software complies with the standard then you'll have do a bit more to remove OEM partitions.

You could give DISKPART a chance. :)

Thanks it worked out...now I want to do a clean install of Win 8 since this was a upgrade from OEM Win 7, now its telling me that I have to change from MBR to GPT. From what I've been reading I have to delete the volume I'm currently using? Then convert it to GPT. Now I know in my BOIS my boot is set to legacy boot currently, do i leave it that way? And I do see that there is a program that will convert MBR to GPT its Paragon, now if I use this would all I have to is reboot with the install disk and install Win 8?

I don't quite follow.

What's telling you that GPT is required?

If you're looking for UEFI support then legacy mode should be disabled. Doing so will remove the chance of booting the Windows 8 installation program with legacy boot loader.

DISKPART can convert from MBR to GPT.

Converting to GPT will clear the whole disk since the whole partition table is completely different and it has a copy of the table located at the end of the disc. So one bad sector will not screw your whole partition table.

So for simplicity and ease of use, conversion erases the whole disk.

If UEFI is fully supported, then you'll get UEFI boot loaders as boot options in your BIOS/UEFI menus.

If the Windows 8 installer is booted using the UEFI boot loader located on the installation medium and if you try to install Windows 8 on a GPT disk then it will create three partitions. MBR or legacy mode, will make it create just two partitions.

If you want to change from MBR to GPT without erasing Everything on that disk, then I can't help you.

I recommend that you start with an empty disk when you go from MBR to GPT and want to install Windows 8.

When I installed Windows 8 for the first time, then I converted my other disks to GPT as well.

I don't quite follow.

What's telling you that GPT is required?

If you're looking for UEFI support then legacy mode should be disabled. Doing so will remove the chance of booting the Windows 8 installation program with legacy boot loader.

DISKPART can convert from MBR to GPT.

Converting to GPT will clear the whole disk since the whole partition table is completely different and it has a copy of the table located at the end of the disc. So one bad sector will not screw your whole partition table.

So for simplicity and ease of use, conversion erases the whole disk.

If UEFI is fully supported, then you'll get UEFI boot loaders as boot options in your BIOS/UEFI menus.

If the Windows 8 installer is booted using the UEFI boot loader located on the installation medium and if you try to install Windows 8 on a GPT disk then it will create three partitions. MBR or legacy mode, will make it create just two partitions.

If you want to change from MBR to GPT without erasing Everything on that disk, then I can't help you.

I recommend that you start with an empty disk when you go from MBR to GPT and want to install Windows 8.

When I installed Windows 8 for the first time, then I converted my other disks to GPT as well.

When I try to install Win 8, not a upgrade since I'm already using it, so when I go to pick the c: partition it says that i cannot install on that partition, because it has to be converted to GPT. So basically this disk gets wiped then? I have Lenovo Ideapad P580, got it last fall, it has 8gb of ram and is a i7....So is it nessary for me to change the boot loader or do I just leave it the way it is?

As for the conversion from MBR to GPT, I don't have a empty disk, I'll be using what I'm writing this right now, but Since I just got it back not too long ago, from being fixed, I don't really mind losing everything.

Copy all important files to a USB device or another PC via LAN.

That's the only advice I can give.

Ok I just want to know if I even need to bother with the messing with the bootloader, switching from legacy to UEFI?

I haven't gotten around to changing it yet, but I'm going to do it now soo, I'm going to convert it using diskpart. I have a system drivers partition, bedsides my OS partition, when I went to delete that volume in diskpart it said that it the device is in use, does it really matter? Do I just override and delete? And when I do should I extend my OS volume to gobble it up? One last thing...when I am going to delete my OS volume and then convert to GPT will this all really take place after I reboot, I guess what I am saying is I can do all of that while I'm in the OS I'm deleting and converting to GPT?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • In addition to the "sidebar app list" and "Collections" features, Microsoft will also deprecate the "Drop" feature. Before you publish this news and credit another site, here is the original source: https://x.com/i/status/2067838711870439583 .
    • Looks like the 7.1 is fake effects, can it at least do real 5.1? It says 'virtual 7.1' in all descriptions.
    • You can't, if you didn't notice, it doesn't support surround at all, it's right in the spec list.
    • Hi — I’m always interested in soundcards. Like displays, I just want to know I’m getting as much clean “sonic juice” into my brain as possible as the years take their toll. I’m not entirely sure what to take away from this review, though. It doesn’t really tell me whether the AE‑X is a good product or who it’s actually for. Most of what I’m getting is: there’s a driver to install, here’s what it looks like, and here’s what’s in the box. There’s a lot of emphasis on the SPDIF input. When you mention not needing to switch headphones between console and PC — does that mean the PC has to be powered on just to pass audio through? That seems like a fairly big waste of energy. Is this more something a streamer would use alongside a capture card? How are you testing the sound? (Also, you might want to clarify that you’re using the headphones in wired mode when you mention they’re wireless.) You mention the lack of EMI shielding — how much real‑world difference does that make compared with typical motherboard audio? On multi‑channel: what exactly isn’t supported? Does this mean Windows spatial audio (Dolby Atmos for Headphones, DTS Headphone:X, etc.) won’t work, or just that the card itself doesn’t decode surround formats? And are there any true multi‑driver “surround” headphones left that would even use that? You also highlight support for high‑impedance headphones — but what does that translate to in practice? How does it compare to driving the same headphones from a normal device, and does it make any difference for everyday, lower‑impedance models? In short, who is this card actually targeted at?
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      Michael Scrip
      74
  • Tell a friend

    Love Neowin? Tell a friend!