My iMac has a blue screen and not continuing to the desktop, Help please.


Recommended Posts

I had recently come back from 1 week away and I turned on my Mac and it turned on normally, except it took about an extra 2 minutes that what it did usually. It then couldn't open anything and it just stayed at the rainbow wheel spinning, so I reset it. When I restarted my Mac again, it took about 2 minutes at the white screen (can hear my tone thanks to command option r) and then at the blue screen and the black spinning load icon disappears and comes back every 10 seconds. What can I do to get it working normally again?!

I had recently come back from 1 week away and I turned on my Mac and it turned on normally, except it took about an extra 2 minutes that what it did usually. It then couldn't open anything and it just stayed at the rainbow wheel spinning, so I reset it. When I restarted my Mac again, it took about 2 minutes at the white screen (can hear my tone thanks to command option r) and then at the blue screen and the black spinning load icon disappears and comes back every 10 seconds. What can I do to get it working normally again?!

Are you able to force it into internet recovery mode? have you run the diagnostic test?

Think you should try the following. Taken from here...

How to Change Startup Drive Permissions If You Don't Have Another Startup Device Available

  1. If you don't have another startup device to use, you can still change the startup drive's permissions by using the special single-user startup mode.
  2. Start your Mac while holding down the command and s keys.
  3. Continue to hold both keys down until you see a few lines of scrolling text on your display.
    It will look like an old-fashioned computer terminal.
  4. At the command prompt that appears once the text has stopped scrolling, enter the following:
    mount -uw /
    ?
  5. Press enter or return. Enter the following text:
    chown root /
    ?
  6. Press enter or return. Enter the following text:
    chmod 1775 /
    ?
  7. Press enter or return.
    Enter the following text:
    Exit
    ?
  8. Press enter or return.
  9. Your Mac will now boot from the startup drive.

If you still have problems, try repairing the startup drive using the methods described earlier in this article.

Think you should try the following. Taken from here...

How to Change Startup Drive Permissions If You Don't Have Another Startup Device Available

  1. If you don't have another startup device to use, you can still change the startup drive's permissions by using the special single-user startup mode.
  2. Start your Mac while holding down the command and s keys.
  3. Continue to hold both keys down until you see a few lines of scrolling text on your display.
    It will look like an old-fashioned computer terminal.
  4. At the command prompt that appears once the text has stopped scrolling, enter the following:
    mount -uw /
    ?
  5. Press enter or return. Enter the following text:
    chown root /
    ?
  6. Press enter or return. Enter the following text:
    chmod 1775 /
    ?
  7. Press enter or return.
    Enter the following text:
    Exit
    ?
  8. Press enter or return.
  9. Your Mac will now boot from the startup drive.

If you still have problems, try repairing the startup drive using the methods described earlier in this article.

Ok I did that and then some other text came up as shown in the image, and then it wen straight to white screen, then 2 minutes of waiting, back to blue, and now its going from black to blue over and over

post-491100-0-58282000-1368847858.jpg

post-491100-0-91441900-1368847870.jpg

I don't really see any error messages on any of those pictures here, so it's difficult to diagnose the problem.

Quickest thing to do would be to get your OS X disc and run Disk Utility from it.

Failing that, a re-install.

If it's a hardware issue, then you will have to get it repaired.. which is no easy task. :/

I don't really see any error messages on any of those pictures here, so it's difficult to diagnose the problem.

Quickest thing to do would be to get your OS X disc and run Disk Utility from it.

Failing that, a re-install.

If it's a hardware issue, then you will have to get it repaired.. which is no easy task. :/

Should I have this OS X disc or do I have to buy it..? And if so, how much?

If it is still under warranty I would recommend taking it to an Apple Store. If your Mac came with and optical drive then it should have come with an OS X disc. Otherwise, you can contact Apple support to see if they will give you a replacement disc for your Mac.

Do you have a time machine backup on an external disk? If you do and it is setup correctly you should be able to boot from that.

Umm... I generally always have a backup, but if my hard disk crashed and I couldn't even get a recovery console open to reinstall OS X Mountain Lion or boot from my Time Machine backup I would probably "find" OS X "out there" and then reinstall it (probably via a bootable usb drive that I create on another computer).

If it boots fine off a time machine backup, or a USB disk (such as a linux partition on bootable usb) then try restoring the internal HDD from the time machine backup, you can do this either by booting off the Time Machine drive, or by booting off the OSx setup CD. If this fixes the problem great! If not you need to run the Apple extended hardware test (insert iLife CD and hold CMD +D) (this takes a LONG time), if any of the Apple Hardware test fails, take it back for servicing / replace the HDD.

This topic is now closed to further replies.
  • Posts

    • I must admit, this is probably the only game at the moment where I can see that $80 price point being ok. The issue will be when other developers think they can get away with it with half of the work.
    • Google Wallet expands TSA PreCheck Touchless ID access to more travellers by Fiza Ali Google has announced that Google Wallet is becoming the first digital wallet to integrate with TSA PreCheck Touchless ID. It is a programme that lets eligible travellers move through participating airport security checkpoints using facial recognition instead of showing a physical ID or boarding pass. While the TSA PreCheck Touchless ID programme has been available for some time, using it hasn't always been straightforward. The programme currently operates at 65 airports across the US, but participation has largely depended on flying with a limited number of airlines. Travellers also had to upload passport information separately through participating carriers. Now, the tech giant's new integration is designed to remove some of those extra steps. With the update rolling out in the coming weeks, travellers with TSA PreCheck membership will be able to enrol in Touchless ID through Google Wallet and use the service with any of the 100 airlines participating in the programme. Rather than repeatedly submitting identification details, users can store a digital ID in Google Wallet and use it to streamline future trips. Setting up the feature is relatively straightforward as well. The process starts with users creating a digital ID in Google Wallet using their passport information. After checking in for a flight and saving a boarding pass to the app, eligible travellers will see a "Get started" option that directs them to the TSA enrolment process. Once users choose to share their ID pass and boarding pass information with the TSA for a specific trip, the agency will verify the enrolment. If approved, a TSA PreCheck Touchless ID indicator will appear on the boarding pass stored in Google Wallet, signalling that the traveller can use designated express Touchless ID lanes at participating airports. As privacy and security are likely to be key considerations for many travellers, Google says users must explicitly opt in before any information is shared with the TSA, and authentication is required through a device PIN, pattern, or biometric verification. The company also notes that digital IDs stored in Google Wallet remain encrypted and are kept on the user's device. For frequent flyers who already use TSA PreCheck, the new integration could remove a few more steps from the airport security process, making travel slightly faster and a little less cumbersome.
    • Even though MS had to sunset the Windows Subsystem for Android, you can apparently use BlueStacks to run Android in Windows now. I haven't tested this yet, so if anyone has any feedback, I'd love to hear it.
    • Or, if you want to teach your kids how to hallucinate and lie like AI slop, introduce them to a Crazy MAGA Grandpa on LSD.
    • Ventoy 1.1.14 by Razvan Serea Ventoy is an open source tool to create bootable USB drive for ISO/WIM/IMG/VHD(x)/EFI files. With Ventoy, you don't need to format the disk over and over, you just need to copy the ISO/WIM/IMG/VHD(x)EFI files to the USB drive and boot them directly. You can copy many files at a time and ventoy will give you a boot menu to select them. Both Legacy BIOS and UEFI are supported in the same way. Most type of OS supported (Windows/WinPE/Linux/Unix/Vmware/Xen...) Ventoy features: 100% open source Simple to use Fast (limited only by the speed of copying iso file) Directly boot from ISO/WIM/IMG/VHD(x)/EFI file, no extraction needed Legacy + UEFI supported in the same way UEFI Secure Boot supported (since 1.0.07+) Persistence supported (since 1.0.11+) MBR and GPT partition style supported (1.0.15+) WIM files boot supported (Legacy + UEFI) (1.0.12+) IMG files boot supported (Legacy + UEFI) (1.0.19+) Auto installation supported (1.0.09+) File injection supported (1.0.16+) ISO files larger than 4GB supported Native boot menu style for Legacy & UEFI Most type of OS supported(Windows/WinPE/Linux/Unix/Vmware/Xen...), 550+ iso files tested Not only boot but also complete installation process ISO files can be listed in List mode/TreeView mode Linux vDisk boot supported (vdi/vhd/raw) "Ventoy Compatible" concept Plugin Framework Menu Alias/Menu Style/Customized Menu supported USB drive write-protected support USB normal use unaffected Data nondestructive during version upgrade No need to update Ventoy when a new distro is released Ventoy 1.1.14 changelog: Update secure boot shim file to solve the UEFI CA 2023 issue. The new release use a new CA, so you need to enroll the new key for the first boot time. VentoyPlugson update synchronously. Global control plugin add a VTOY_SECURE_BOOT_POLICY option. Notes Download: Ventoy 1.1.14 | 15.9 MB (Open Source) Download: Ventoy Live CD | 187.0 MB Link: Ventoy Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
    • One Year In
      Tom Schmidt earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      457
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      123
    4. 4
      Michael Scrip
      83
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!