My iMac has a blue screen and not continuing to the desktop, Help please.


Recommended Posts

I had recently come back from 1 week away and I turned on my Mac and it turned on normally, except it took about an extra 2 minutes that what it did usually. It then couldn't open anything and it just stayed at the rainbow wheel spinning, so I reset it. When I restarted my Mac again, it took about 2 minutes at the white screen (can hear my tone thanks to command option r) and then at the blue screen and the black spinning load icon disappears and comes back every 10 seconds. What can I do to get it working normally again?!

I had recently come back from 1 week away and I turned on my Mac and it turned on normally, except it took about an extra 2 minutes that what it did usually. It then couldn't open anything and it just stayed at the rainbow wheel spinning, so I reset it. When I restarted my Mac again, it took about 2 minutes at the white screen (can hear my tone thanks to command option r) and then at the blue screen and the black spinning load icon disappears and comes back every 10 seconds. What can I do to get it working normally again?!

Are you able to force it into internet recovery mode? have you run the diagnostic test?

Think you should try the following. Taken from here...

How to Change Startup Drive Permissions If You Don't Have Another Startup Device Available

  1. If you don't have another startup device to use, you can still change the startup drive's permissions by using the special single-user startup mode.
  2. Start your Mac while holding down the command and s keys.
  3. Continue to hold both keys down until you see a few lines of scrolling text on your display.
    It will look like an old-fashioned computer terminal.
  4. At the command prompt that appears once the text has stopped scrolling, enter the following:
    mount -uw /
    ?
  5. Press enter or return. Enter the following text:
    chown root /
    ?
  6. Press enter or return. Enter the following text:
    chmod 1775 /
    ?
  7. Press enter or return.
    Enter the following text:
    Exit
    ?
  8. Press enter or return.
  9. Your Mac will now boot from the startup drive.

If you still have problems, try repairing the startup drive using the methods described earlier in this article.

Think you should try the following. Taken from here...

How to Change Startup Drive Permissions If You Don't Have Another Startup Device Available

  1. If you don't have another startup device to use, you can still change the startup drive's permissions by using the special single-user startup mode.
  2. Start your Mac while holding down the command and s keys.
  3. Continue to hold both keys down until you see a few lines of scrolling text on your display.
    It will look like an old-fashioned computer terminal.
  4. At the command prompt that appears once the text has stopped scrolling, enter the following:
    mount -uw /
    ?
  5. Press enter or return. Enter the following text:
    chown root /
    ?
  6. Press enter or return. Enter the following text:
    chmod 1775 /
    ?
  7. Press enter or return.
    Enter the following text:
    Exit
    ?
  8. Press enter or return.
  9. Your Mac will now boot from the startup drive.

If you still have problems, try repairing the startup drive using the methods described earlier in this article.

Ok I did that and then some other text came up as shown in the image, and then it wen straight to white screen, then 2 minutes of waiting, back to blue, and now its going from black to blue over and over

post-491100-0-58282000-1368847858.jpg

post-491100-0-91441900-1368847870.jpg

I don't really see any error messages on any of those pictures here, so it's difficult to diagnose the problem.

Quickest thing to do would be to get your OS X disc and run Disk Utility from it.

Failing that, a re-install.

If it's a hardware issue, then you will have to get it repaired.. which is no easy task. :/

I don't really see any error messages on any of those pictures here, so it's difficult to diagnose the problem.

Quickest thing to do would be to get your OS X disc and run Disk Utility from it.

Failing that, a re-install.

If it's a hardware issue, then you will have to get it repaired.. which is no easy task. :/

Should I have this OS X disc or do I have to buy it..? And if so, how much?

If it is still under warranty I would recommend taking it to an Apple Store. If your Mac came with and optical drive then it should have come with an OS X disc. Otherwise, you can contact Apple support to see if they will give you a replacement disc for your Mac.

Do you have a time machine backup on an external disk? If you do and it is setup correctly you should be able to boot from that.

Umm... I generally always have a backup, but if my hard disk crashed and I couldn't even get a recovery console open to reinstall OS X Mountain Lion or boot from my Time Machine backup I would probably "find" OS X "out there" and then reinstall it (probably via a bootable usb drive that I create on another computer).

If it boots fine off a time machine backup, or a USB disk (such as a linux partition on bootable usb) then try restoring the internal HDD from the time machine backup, you can do this either by booting off the Time Machine drive, or by booting off the OSx setup CD. If this fixes the problem great! If not you need to run the Apple extended hardware test (insert iLife CD and hold CMD +D) (this takes a LONG time), if any of the Apple Hardware test fails, take it back for servicing / replace the HDD.

This topic is now closed to further replies.
  • Posts

    • I'm too old to return to the "good old days" when I was installing custom ROMs and tinkering with my devices - now I just want to turn it on and use it. I've read that banking and payment apps work on Murena /e/OS (I'll have to check the ones I use) and I also really want to support Fairphone 😉
    • Time to start going to the local church and play Bingo for a while.
    • NVIDIA announces 35 new AI HPC supercomputers across Europe by Fiza Ali NVIDIA has announced that 35 AI high-performance computing (HPC) supercomputers are planned to open throughout Europe this year. This marks what the company describes as the largest single-year expansion of AI infrastructure in the history of the continent. These new systems, unveiled at ISC High Performance 2026, will be placed at a number of national supercomputing centres, AI factories, and research institutes to provide advanced computing resources to more than three million researchers. Describing AI, NVIDIA founder and CEO Jensen Huang stated, "AI is the new instrument of science, and Europe is building the infrastructure to put it in the hands of millions of researchers." Built on NVIDIA's Blackwell and Hopper architectures, the new systems will support research in climate science, healthcare, clean energy, quantum computing, and other scientific fields. Among the major projects are the Barcelona Supercomputing Center's MareNostrum 5 AI upgrade, BavariaAI's Blue Swan platform in Germany, Italy's IT4LIA AI factory, Germany's HammerHAI project, and Sweden's Mimer AI Factory. The Barcelona Supercomputing Center plans to expand MareNostrum 5 with NVIDIA GB300 NVL72 and GB200 NVL4 systems. In total, the BSC expects to deliver up to 20 exaflops of AI training performance and 33 exaflops of AI inference performance. This increased computational capability will support research efforts related to climate modelling, biotechnology, energy systems, etc. Furthermore, as part of the IT4LIA project, more than 8,000 GPUs, each based on NVIDIA’s GB200 NVL4 architecture, will be used in Italy. This represents one of the largest AI factory initiatives announced to date. Additionally, the Blue Swan platform from BavariaAI will include about 1,000 GPUs to help develop multimodal AI models for use in the medical field, robotics, and various areas of scientific research. NVIDIA also emphasized in the announcement how rapidly growth of accelerated computing usage is taking place within both energy and climate-related research. The company said Siemens Energy uses NVIDIA-powered technologies to significantly accelerate the process of designing and simulating hydrogen-capable gas turbines. Using those same acceleration technologies, Siemens was able to reduce simulation time by up to 77 percent. The company also highlighted several quantum computing initiatives across Europe. CINECA, EuroHPC, and Pasqal are integrating a quantum processing unit into Italy's CINECA supercomputing centre using NVIDIA's CUDA-Q platform. Meanwhile, researchers at Germany's Julich Supercomputing Centre recently simulated a universal 50-qubit quantum computer on the JUPITER supercomputer. The announcement demonstrates Europe's continued commitment to building out its infrastructure supporting AI and supercomputing as governments, research organizations, and technology companies compete to build out their respective computing capacities and secure their positions in advanced scientific research.
    • Any word on a fix for this? Even a work around would be nice,
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      204
    3. 3
      PsYcHoKiLLa
      98
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!