Microsoft "No fee to play XBOX one games on other consoles"


Recommended Posts

The rental companies could just get codes to issue to renters, easy.

Now do these codes allow you to play indefinitely, or do they still expire? If they expire as spoken about earlier that completely destroys the currental rental ethos. Are these codes going to be supplied for every Xbox One game to EVERY rental company? There exists some smaller scale online based rental companies, see Boomerang Games for the UK. Are they printed or emailed, if printed who is footing the cost for them? Can rental discs be shared amongst friends? While not officially sanctioned by rental companies, I'm pretty sure people take current rentals to their friends house - Does that go back to the whole you need to be signed into your account to play the disc? Currently people can buy rentals to keep to own from Gamefly, will that still work? If so, what happens next do Gamefly need to supply you with another code for ownership of the disc?

The rental companies could just get codes to issue to renters, easy.

How would that work though? Mail rental companies let you keep the game for as long as you want, providing your paying your monthly subscription. Do they issue a code that they then have to revoke when they get the disc back? They won't go for that, far too much costly admin involved. Will the code be time limited? They won't do that either, their subscribers can keep the games as long as they want.

The only practical solution is the one they currently use, so don't be surprised if they just don't carry games for the new console.

XBox One? Better start calling it XBoned. :p

We don't have enough info on the details yet though. What if you can lend out a game but until you get it back you can't play it yourself? We honestly don't know what they'll do, they haven't said specifics yet so everyone is just guessing.

Actually we do. A friend can borrow your game disc, because you will not need it. But when he installs it on his Xbox One he will need to activate it before he can play it. He can not activate it because you have the "activation" code that came with the game attached to your Live account, so he will need to buy a license. Essentially repurchasing the game.

Here:

Phil Harrison tries (again) to clarify game ownership, second-hand sales and always-online in Xbox One

And here:

CVG Andy Robinson: "Just interviewed Phil Harrison. Reaffirmed that second hand games need to be repurchased"

And here:

But they do not do that, that's not part of the rental ethos. You can rent a game from them and as long as you're paying your lovefilm subscription keep it for as long as you want. That would essentially "kill" the rental market, here you go guys pay the ?12 a month to us for your games rental package AND if you keep a game longer than 3 days you need to start paying ?1 a day :/

It depends on the terms that Microsoft or publishers set and we could see some innovative new approaches - there's no reason that rentals would have to be charged at a daily rate. The problem is that currently developers don't make money from rented games beyond the initial sale - the result is that companies like Lovefilm and GameStop are leeching money away from the gaming industry, away from the people creating the content. Most consumers don't even know it's happening.

I have no problem with people who are currently leeching off the gaming industry by renting games being asked to pay more to compensate developers. They are contributing no more to the gaming industry than people who simply pirate games.

It depends on the terms that Microsoft or publishers set and we could see some innovative new approaches - there's no reason that rentals would have to be charged at a daily rate. The problem is that currently developers don't make money from rented games beyond the initial sale - the result is that companies like Lovefilm and GameStop are leeching money away from the gaming industry, away from the people creating the content. Most consumers don't even know it's happening.

I have no problem with people who are currently leeching off the gaming industry by renting games being asked to pay more to compensate developers. They are contributing no more to the gaming industry than people who simply pirate games.

Really? Pirating equal to renting? Rental companies do not get game discs for free, it has to be purchased all they do is give that stock to different people continually. Essentially you are saying if I lend my friends games I'm not "contributing to the gaming industry" :s

Gamefly have that awesome policy in place that DirtyLarry has been vocal about using that you can decide to buy the game you're renting directly from them if you want to keep it.

Renting/borrowing/temporarily owning is part of the human world, the games industry does not sit on a pedestal to sit and judge people who cannot afford to, but do still contribute money where they can to their hobby. If MS want to try and kill rentals fine, that's their roadmap, but to ever try and put pirates and people who rent even in the same room, not really fair.

It depends on the terms that Microsoft or publishers set and we could see some innovative new approaches - there's no reason that rentals would have to be charged at a daily rate. The problem is that currently developers don't make money from rented games beyond the initial sale - the result is that companies like Lovefilm and GameStop are leeching money away from the gaming industry, away from the people creating the content. Most consumers don't even know it's happening.

I have no problem with people who are currently leeching off the gaming industry by renting games being asked to pay more to compensate developers. They are contributing no more to the gaming industry than people who simply pirate games.

Maybe with the current state of games people don't want to waste ?40 for a short, lowest common denominator, game. I buy what I want to buy, rent and use PS+ to get games I wouldn't even think of buying, I don't see how that is "leeching", publishers don't get my money whether I rent it or not.

I really like this comment

"That makes no sense. An NFL game is a one-time game. A video game/movie/music CD is a PRODUCT you BUY and OWN.

Look up the First Sale Doctrine. You have every legal right to do whatever you want with your product. Sell it. Give it away for free. Use it as a frisbee or shiny drink coaster. Nobody can stop you from doing it, and certainly not any butthurt big companies whining that you just gave the game you PAID for already away to someone else and they didn't get a dime from it. Too bad.

These are products, not sporting events. These are like movies, books, comics, CDs, and every one of those mediums, with the SOLE exception of games, acknowledges that the second-hand market exists and is ALLOWED to exist.

You are not right about this. Just because a company acts big and tough does not mean you, the consumer, don't have a butt-load of protected legal rights to any product you pay in full for. You want to buy a used car? Go right ahead. You want to buy a used CD? Go right ahead. You want to buy a used comic book? Go for it. You want to buy a used video game? YOU CAN. You have every right to go right to ebay and sell or buy a game for whatever you wish to spend or ask for, and no company PR guy whining about it changes that reality"

  • Like 4

I can't see how Microsoft Fanboys are going to defend the practice of crippling a disk after it's installed onto your ACCOUNT, that's the important word here folks, it's not installed to your hardware, it's installed to your account. Let's say you rack up 15 games or so, and you're a hardcore gamer, and experience what a lot of other Xbox 360 users have experienced, the loss of your account to some hacker. Microsoft does it's classic blame dodging, and their abysmal support basically tells you your account is gone, your 15 games are gone with it, and they say, "Well just buy them again!". This doesn't look like an appealing situation.

Draconian DRM is generally frowned upon in the gaming community, and it looks like Xbox One is THE DRM system.

No, discs are mass produced, if one game has an encryption key on the disc then every copy of that disc produced will have the same encryption key, you cannot do what you're talking about without making a brand new master for each disc, and the cost, time, machining and everything to do that makes it impossible.

Think Windows XYZ and product keys. I am not saying it's a good thing but it can be done. It can be as easy as scanning a QR code using Kinect. Rental companies can issue QR codes in similar fashion and you just hold up your smartphone/PC screen for Kinect to read.

How do you differentiate a rental disc without considerable headache? Most of them are simply using "retail" units, hence how Blockbuster sells ex-rentals. They aren't branded or anything.

I think a company that can put a hypervisor at the heart of a game console can easily think of something :laugh:. QR codes are not rocket science.

I can't see how Microsoft Fanboys are going to defend the practice of crippling a disk after it's installed onto your ACCOUNT, that's the important word here folks, it's not installed to your hardware, it's installed to your account. Let's say you rack up 15 games or so, and you're a hardcore gamer, and experience what a lot of other Xbox 360 users have experienced, the loss of your account to some hacker. Microsoft does it's classic blame dodging, and their abysmal support basically tells you your account is gone, your 15 games are gone with it, and they say, "Well just buy them again!". This doesn't look like an appealing situation.

Draconian DRM is generally frowned upon in the gaming community, and it looks like Xbox One is THE DRM system.

You'd think.... I didn't really see anyone convincingly defending EA with SimCity, or Blizzard with Diablo 3. Heck, Blizzard are moving away from DRM with Diablo 3 on the PS3/PS4, tells you a lot.

The PS3 has it spot on with licensing/DRM, it's tied to hardware, up to 2 PS3s now (yes it was better when it was up to 5), and all the content can happily be played offline without any stupid check-ins.

Maybe with the current state of games people don't want to waste ?40 for a short, lowest common denominator, game.

The "current state of games"? If you don't like them then don't play them. You make it sound like people have to suffer through them. Gaming is better than it's ever been and the production values have gone up exponentially, yet prices have remained virtually static (without even factoring in inflation).

As for price, games drop in price very quickly nowadays - the new Tomb Raider was released just a couple of months ago yet already it's only ?24 on X360; Halo 4 costs only ?19 and that's not much older. And expensive games are the price you pay for the convenience of a console. PC games are considerably cheaper and offer much better visuals and gameplay experience.

Obviously people should be wary of Microsoft restricting second hand sales, as it has the potential for abuse. Microsoft doesn't exactly have the best track record when it comes to XBLA, with its focus on advertising above that of supporting developers. However, Steam stands as a shining example of how restricting ownership can benefit gamers through cheaper prices, better community interaction and supporting the developers of games. And as long as Sony doesn't opt for the same restrictions it will keep Microsoft in check. It is up to individuals to decide whether the restrictions are a deal-breaker, though I suspect for most they won't be.

"GameStop's president has offered his two cents on the next-generation used games market, explaining he is confident both Sony and Microsoft are happy to see it continue.

Speaking to Forbes, Tony Bartel reassured consumers that next-generation games will still be bought and sold on the pre-owned market, as console manufacturers appreciate it's a necessary facet of the marketplace.

?

It's a recognised way to make these games more affordable. All three new platforms understand that.

"Both Sony and Microsoft have said games can be resold and that's exactly what we anticipated," he said. "It's a recognised way to make these games more affordable. All three new platforms understand that.

"As people upgraded to PS3 they traded in their old systems and libraries, which is why Sony made the move to not support backwards compatibility with later iterations of PS3. That's why the 'buy, sell, trade' model works well. It enables people to purchase new games by trading in their old ones. We expect to see the same thing with this transition for PS4 and Xbox One. Trade-ins allow for a seamless transition."

Interestingly, Bartel revealed that 70 per cent of GameStop's $1 billion market sales comes from the sale of new games rather than pre-owned ones.Confusion reigned yesterday when sources first reported that the Xbox One wouldrequire mandatory installs, with anyone wanting to play a game on more than one machine forced to pay for it again. Thankfully, this was later clarified as a misunderstanding - you can play a game using your own account from any machine, though you can't share that game with others unless they're signed into your account or playing on the same machine.

So that's nice and clear, then. To try and cut through the confusion surrounding Xbox One, we've put together a list of things we know for certain which we'll be updating as more comes out.

The exact constraints placed upon the resale of games have yet to be revealed."

http://www.ign.com/articles/2013/05/22/gamestop-president-weighs-in-on-next-gen-pre-owned-games

How stupid do they think people are??

The "current state of games"? If you don't like them then don't play them. You make it sound like people have to suffer through them. Gaming is better than it's ever been and the production values have gone up exponentially, yet prices have remained virtually static (without even factoring in inflation).

Gee what a surprise, the old "don't like it don't buy/play them" retort.

You completely missed my point which was I'm not going to spend ?40 on a game I'm not sure of, not all games get demos so the only way I can try it is by renting, but by doing this I'm some kind of leech.

LOL, has anybody seen the disaster going on in N4G with their PS4 crap. Everybody is preassuring Microsoft to respond, i dont know why people are desperate wait till E3 its like 18 days from now. -_- lol i like the console its pretty neat, but im not desperate i swear some people LOL Patience in Virtue :p

That does not really put anything to bed as far as the issue, it still prohibits the readily available access to used games. Unless you are going to create a new ID for every game and sell the ID With it.

Install the game and the Licence will be put on ur gamertag.

Give the game to a friend to borrow, and that deauthorizes your license and puts it on his gamertag

When hes done, he gives the game back, and you reauthorize it. When its deauthorized it wont play.

That hopefully should be the way to do it.

Gee what a surprise, the old "don't like it don't buy/play them" retort.

You completely missed my point which was I'm not going to spend ?40 on a game I'm not sure of

Then don't - just wait a month or two for it to drop in price or go on sale. The problem with traditional renting is that it doesn't reward the people making the game but instead takes money away from them. If publishers want to make money they need to make sure games are priced appropriately, as many people aren't willing to pay full price for them. Like I said, Steam has a good balance - you have a relatively high initial price with pre-order incentives for the eager fans, with substantial flash sales within a month or two of release.

It remains to be see how game rentals will be implemented and how much they'll cost, so we don't know how they'll compare to the current system. They might end up a similar price while supporting developers, in which case it's a win-win. I've never been a fan of cancerous businesses like GameStop, so I couldn't care less if they go under.

Install the game and the Licence will be put on ur gamertag.

Give the game to a friend to borrow, and that deauthorizes your license and puts it on his gamertag

When hes done, he gives the game back, and you reauthorize it. When its deauthorized it wont play.

That hopefully should be the way to do it.

If the rumors are true, I hope this is how it works.

You sir are a die hard ps fan. What are you doing here? All you have to say is negatives about the Xbox. Can we xboxers enjoy the news without any FUD or negatives being spilt?

You don't like the console fine (no one was forcing you to get it anyway)

You don't like the way it looks? (Fine too, nofu)

You don't like that Microsoft didn't only focus on games (ur a ps fan, you weren't going to buy the Xbox anyway)

Oh yeah, I love being able to do jack **** with a game that I beat. I cant sell it, or trade it to anyone, I can't rent it in a store to see if I like it before I buy it, I get to waste my money and be stuck with something I may hate forever! Works perfectly for the publishers, and Microsoft, sucks for the consumer. Thats the way they like it though, so what else is new.

I also think PS4 will also do something for used games, I mean if xbox has this stuff going on, wouldnt developers like it? and Make more games for the new Xbox

I think it's pretty much given that Microsoft won't do it without Sony (unless they get massive deals from publishers).

This topic is now closed to further replies.
  • Posts

    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      222
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!