Recommended Posts

Hey all. I just built my new computer and have just played Dirt Showdown and Spec Ops: The Line.

Dirt ran ok for 5 mins and then I decide to test another game. When playing Spec Ops The line. Everything on the highest possible settings, everything was going well...until about a couple minutes....click....the system rebooted and the bios came up telling me that it detected power surged and rebooted the system as a result to protect it.

I am reusing my old computer's PSU, ThermalTake 600w PSU. Everything except the 2 Molex cables coming from the PSU are being used by my new system.

I went into the bios to check and every seems fine. Here's a screenie:

And rebooted into Windows where everything is fine. Is the PSU not good or too weak for the new system?

post-30282-0-48032300-1369316930.jpg

Link to comment
https://www.neowin.net/forum/topic/1154092-power-surges-detected/
Share on other sites

Here's the full specs:

CPU: i7 3770K with Corsair Hydro H00i on it.

MOBO: ASUS P8Z77V

GPU: asus gtx 680 directcu ii 4gb

RAM: 16 GB

SSD: Samsung 256GB

2 HDDs: Seagte 2TB and 500GB

Pioneer Blu-ray drive

Running Win7

Powered by a ThermalTake 600w PSU taken from old PC.

Yep, you want at least a 650 - 750w and if you can afford it get something from Corsair or even Seasonic.

Whomever told you that 600w is enouhg and more is overkill has obviously never owned either a gaming system or a PC with a lot of kit in, I for example have a 750w in mine with the following setup:

Core i5 3570k

16GB DDR3 RAM

GeForce 560Ti

3 Optical Drives (Including 1 BluRay Writer)

1 SSD

5 HDD's

PCI-E Sound Card

Multiple fans in case etc etc

I would go corsair 850

http://www.amazon.com/dp/B003PJ6QWE

Yeah, 800W is overkill. I'd get a Corsair TX650. I have one, been running with it for at least 2 years now.

The calc says his computer as it sits is right around the 600 mark, 650 won't give much more wiggle room than what he has now. If he overclocks he is done, he adds another gpu he is done. 800 is the minimum I would go with, it is better to have more than just enough. The 600 was probably overkill for his old PC...this isn't his old pc.

The calc says his computer as it sits is right around the 600 mark, 650 won't give much more wiggle room than what he has now. If he overclocks he is done, he adds another gpu he is done. 800 is the minimum I would go with, it is better to have more than just enough. The 600 was probably overkill for his old PC...this isn't his old pc.

Yet, 800/850W is still overkill for him. 650W is probably his low end. But he should still be able to usee it for days to come. Those calculators are rubbish.

Yet, 800/850W is still overkill for him. 650W is probably his low end. But he should still be able to usee it for days to come. Those calculators are rubbish.

Tell that to his computer that is shutting down when the calc say 583W is needed, rubbish maybe as it can't account for everything...it is only a guage to recommend what you should get...IMO go over board a bit, jump a few hundered watts to be on the safe side. Stay too close and you will get burned again.

Power supplies rated for 600W won't necessarily produce the full wattage consistently and your system's i7 processor, with it's turbo going, will surely be straining your borderline acceptable wattage. Upgrade to a 700W+ for your current configuration. Even higher if you ever want to upgrade, as sc302 said.

In fact, I would like to add to the specifics of "overkill" and "fine" relating to power you will need. A power supply that is always pumping out it's full rating will die quickly. That much stress is not how they are meant to be used. You need head room of about 20%. Any more than that, and yes, it's less energy efficient but that's it. At least you won't have any issues and you will be able to upgrade in the future.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The problem isn't with Epic, it's with the platform holders like Steam and Nintendo, they should be a lot more strict in their review process.
    • Hello, Installed here without issue. Regards, Aryeh Goretsky
    • Microsoft updates Visual Studio Code with easier language model discovery and in-app search by Paul Hill Microsoft has released Visual Studio Code 1.125, its latest weekly release. This week, the company has focused on discovering and installing extra language models via the Marketplace; searching the web and securely browsing over remote connections without leaving VS Code; choosing how long VS Code waits before installing extension updates; and delivering managed Copilot settings through existing device management tooling. In older versions of VS Code, extensions could contribute their own model providers, but to find these extensions, you needed the right tags to search for in the Extension view. Now, the Language Models editor gives you an Install Model Providers button that opens the Extensions view, which is filtered to extensions that contribute model providers, making it easier to find and install them. Once you install a provider, its model will appear in the model picker. If you use the integrated browser much, you can now look up information without leaving VS Code by typing a query into the integrated browser’s address bar. It will use your configured search engine, the same way a standalone browser does. You can use workbench.browser.searchEngine to pick a search engine. When the browser is opened in a remote workspace, it's now possible to proxy HTTP(S) traffic via the remote connection. This allows you to connect to any ports or services that can only be accessed from the remote machine. If you read our coverage from two weeks ago about VS Code 1.123, you might have seen that extension updates have a two-hour delay as a safety measure. In this update, Microsoft is giving you the ability to configure the time of the delay. You can find it under extensions.autoUpdateDelay. Finally, with this update, admins can deliver managed GitHub Copilot settings through native device management (MDM) channels on Windows and macOS, in addition to account-based enterprise settings files. Settings delivered via MDM appear as policy-enforced in VS Code and can’t be overridden locally. Future updates will extend the supported policy keys across Copilot surfaces. You can download the update from the Visual Studio Code website now.
    • "it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account" You already have a Microsoft account if you are using Windows 11, because you can't set it up without one.
  • Recent Achievements

    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
    • Week One Done
      Harris Gilbert earned a badge
      Week One Done
    • One Month Later
      Vincian earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      543
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      84
    4. 4
      ATLien_0
      64
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!