New PC. Corsair Builder CX600W 80+ Bronze or not?


Recommended Posts

Heu guys,

I am building a new budget PC and while i have everything sorted out i am kinda stuck on the PSU selection. First of all this is the full specifications of the PC i am building:

CPU: Intel Core i5 3570

MOBO: Gigabyte Z77M-D3H

RAM: Corsair Vengeance DDR3 4GB DIMM 1600Mhz

GPU: None.I'll be using the i5's integrated for the beginning until i can afford a seperate GPU

HD: WD 5000AAKX 500GB

PSU: Corsair Builder Series CX600W 80+ Bronze

Now i am aware that 600w are more than enough for the system and i could go below that but i don't really want to do that having feature upgrades on my mind. Also i can not go above 110 euros.

My question is, if the CX600W is a good quality PSU that will last for some years.

I was also thinking of the Corsair Enthusiast Series TX650 V2 650W 80+ Bronze Certified which is supposed to be better but i saw videos in which the fan was running loud that made me doubt about its quality. Here are the videos:

Also regarding the CX600W i couldn't find any reviews on the internet so if anyone owns that PSU maybe can give some insight.

I've got a corsair PSU and can defintatly back their quality....Mine runs almost silent - I've got the Corsair 850W HX Modular PSU - From corsairs website - "Corsair HX Series? modular power supply units are designed for gaming rigs, overclocking systems, or any PC where rock-solid stability is essential. HX Series PSUs have earned 80 PLUS? Gold certification to guarantee cool, efficient operation.

Im sure the only reason that the bronze is loud i because its their budget one..If you could spend a few more ?$? I'd recommend the HX series...Even a smaller one like a 650...Not sure of the pricing now though :)

Hey SickDave, thank you for the reply.

I was hoping for some info if anyone knows though about the CX600W.I understand that HX is a better more well build series but unfortunately i have already exceeded the money limit if i go with the TX650.

I am mostly between these two and since TX650 doesnt seem to be that better in terms of quality compared to the CX600W (unless i am wrong) i cant see why i should pay more for it and not get the CX600W for less money.

Thank you all for your replies guys

I have a TX650. TX is the normal level. HX is for modular PSU's. CX is the consumer level (build level).

If you dont mind me asking, for how long do you have the TX650 and have you noticed any of the fan noise like on the videos i posted or any other issues?

If you dont mind me asking, for how long do you have the TX650 and have you noticed any of the fan noise like on the videos i posted or any other issues?

:rofl:

I think I had my TX650 since I upgraded to 1156. That was in early 2012, March or April. That was before the Rev. 2 version.

I never noticed any fan problems. But when you have 2x 250mm, 3x 120mm, and GFX fans, you never really notice it. Never gave me any problems.

None of quite a many CX (V2 series) of various output capacities, all CWT design, have failed thus far. It has been about a year since we've added them.

Might want to go with (relatively) new CX600M, too. Same platform.

Haven't seen that fan problem with some TX that have come my way.

None of quite a many CX (V2 series) of various output capacities, all CWT design, have failed thus far. It has been about a year since we've added them.

Might want to go with (relatively) new CX600M, too. Same platform.

Haven't seen that fan problem with some TX that have come my way.

That is quite useful info.Thx.

I have to say the low price of CX series is really tempting.

The only reason i am thinking of not going for the CX is i can't believe there is not one single review for it and regarding the TX the extra 40 euros for it must be for something...

Corsair doesn't make inner workings of units themselves. TX V1 made a big confusion at the time - Corsair switched from SeaSonic to CWT sometime in 2011, didn't tell anybody. Tbh, nobody ever does. Anyway, the one you see in the first video (pale yellow stickers) could be either. TX V2 (orange stickers) is SeaSonic again. Both Taiwanese, but SeaSonic is regarded a more premium brand, doesn't skimp on components by principle. Doesn't mean they won't fail (we see that fans have, apparently), but does raise the price.

Another thing over CX (in both CWT and SeaSonic design of TX) is independently regulated (TX) design vs group regulated (CX). The former generally means more stability of all kinds (clean voltage, transients, crossload) when overclocking or otherwise pushing the limits of the unit.

The last thing is 80+ efficiency. TX is rated Bronze (that is - just about 80% efficient at any load), CX isn't at all. Those pennies (or cents) that creep up in the electricity bill later for not having that no more than several percent advantage of TX won't, of course, even out the premium you'd pay for a more efficient unit right away. But it's of different importance for each of us.

Thanks for all the info.

 

After visiting the corsair forum and reading threads, I was ready to go with the CX series mainly beacuse i couldnt find any threads with problems for it.

On the other hand i found many threads with TX650, TX650v2 and generally the TX series problematic behaviour.

 

The CX is way too cheap however (whatever that means in terms of quality) and after reading what Phouchg said on the last post i think i am willing to risk it with the TX series...

I am fine if something happens to the PSU after some time.My main concern is not to destroy anything else with it in case it starts malfunctioning.

If you can buy a CX600M! I bought the M model, and it's modular, compared to the CX600. I can barely hear the PSU, and my build is very minimal - I have 4 fans total (CPU, Chasis fan, PSU fan, and video card fan)

If you can buy a CX600M! I bought the M model, and it's modular, compared to the CX600. I can barely hear the PSU, and my build is very minimal - I have 4 fans total (CPU, Chasis fan, PSU fan, and video card fan)

I know, i would but the store where i am going to build the pc from doesnt have the CX600M and i don't want to build the thing myself because i want the warranty.

Unfortunately i am stuck with the CX600W and the TX650v2

This topic is now closed to further replies.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!