Recommended Posts

I bought some RAM online but the pin layout is different. Looking at some online datasheets they are both DDR2 and made for desktop but seem incompatible.

I say they are incompatible because the notch on the new RAM is more centered than the one on the current PC.

Here are the part numbers:

78T6453FZ0-CD5 (current)

F2-6400CL5D-4GBNT (new)

With that, Google will show information and hopefully you guys see something Im missing :)

Thank you

Link to comment
https://www.neowin.net/forum/topic/1162102-different-pin-layouts-for-ddr2/
Share on other sites

I've had that very same problem when rebuilding older systems, best advise I can give, is go back to your retailer, and tell them that the module doesn't fit, (if possible take the mobo with you) that way it's the retailer who will try to solve the problem for you. (At least that's what I did)

Please note, I only know how to build em, not much more than that...

If they are visibly different (DDR2 FBDIMMs are different from UDIMMs, for example), take them back to the store - nobody can argue with that.

 

However, if PNs are correct, they, in theory, should both be DDR2 UDIMM and therefore similar :s

Are you sure you're not putting them the other way round (which is a stupid thing, but does happen to the best of techxperts)?

 

post-382760-0-37712900-1372685742.png

The first listed, 78T6453FZ0-CD5, appears to be a part number for the actual memory chip, not the stick of memory, so it's kind of hard to compare the two numbers you gave. That memory module is used on a number of different sticks of memory.

 

Same as most people have said though. Take them both out and line them up, do they match or no? Make sure you put it in the right way, make sure neither or both are registered, buffered, ecc, etc. You can hold them pin edge to pin edge and quickly see if the pins line up or not.

According to an OEM PC site for memory -

I did a memory search - and the first if you put a M in front of it .  

Seems to be Samsung OE  (Manufacturer Number)

Which it is saying that it is PC 4200  and is listed as this "DDR2-533 DIMM iMac G5, Samsung" ..

 

Hope this helps...  

 

The second number comes back as this...

 

G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBNT

Ahh, you're right. Add M3 to the front and it shows up as a 512 MB stick of DDR2. They both look to be unbuffered and non-ecc, as well as 240 pin DDR2. I hate to say it but I'm gonna have to also go with putting them in backwards. I don't see any reason why they would be different pin layouts.

Don't mean to sound daft, but erm... did you try to flip it ? seems to me that the only problem looking at your pics is that both sticks are in the opposite direction, nothing more...

  On 02/07/2013 at 07:15, MP Technologie said:

Don't mean to sound daft, but erm... did you try to flip it ? seems to me that the only problem looking at your pics is that both sticks are in the opposite direction, nothing more...

Maybe I did not try it because of the sticker :p I feel like I should be nominated for a Darwin award if its just that lol.....

Give me a second.

  On 02/07/2013 at 07:15, MP Technologie said:

Don't mean to sound daft, but erm... did you try to flip it ? seems to me that the only problem looking at your pics is that both sticks are in the opposite direction, nothing more...

 

 

  On 02/07/2013 at 07:45, neohelp said:

Yup, Darwin award nomination here.

Sorry about wasting your time, guys.

LOL glad it's sorted, award the answer to the guy above pls on page 1 :P

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • OneDrive for Mac now lets you sync files to removable drives by Taras Buria If you use OneDrive on Mac and often work with external drives (a common sight among Mac users where internal storage is not upgradeable), Microsoft has some good news for you: the OneDrive client for macOS now supports removable drives, allowing you to sync files to external disks, both non-removable and removable. Microsoft introduced external drive support in OneDrive for Mac at the beginning of 2025. However, the initial rollout was limited to drives that macOS detects as non-removable. The company received plenty of feedback from users regarding this change, and it is now addressing the inability to sync files to removable drives. External drive support in OneDrive works the same way as syncing files to internal storage. If you unplug your drive, say, a portable SSD, OneDrive will stop syncing and notify you with an error message (there is a short delay for drives that sporadically disconnect). To resume sync, reconnect your drive and restart OneDrive. If you want to sync OneDrive to an external drive, your drive should be formatted for APFS (Apple File System) and protected by FileVault (read-only, network, and quarantined drives are not supported). Also, you need macOS version 15.0 or newer and OneDrive version 25.097 or newer. For now, external drive support is only available for insiders, but a wider rollout is coming soon. Finally, Microsoft adds that external drive support does not allow moving drives between devices. Therefore, you must set up OneDrive sync again every time you connect your drive to a new Mac. You can read more about external drive support in OneDrive for Mac in a post on the official Tech Community website. In other OneDrive news, check out our recently published guide, which details how to change OneDrive folder colors for extra personalization.
    • I'm here for it! Bill Pullman & Rick Moranis Returning For New ‘Spaceballs’; Keke Palmer Also Set https://deadline.com/2025/06/spaceballs-2-casts-rick-moranis-bill-pullman-keke-palmer-1236431204/ It's gonna be epic! 
    • Lipstick on a data-hungry pig...
    • I really feel like we need a 3rd good phone OS option to compete with Google and Apple.
    • After 40 years we asked what the fans want...... and are making this movie anyway! 
  • Recent Achievements

    • One Month Later
      POR2GAL4EVER earned a badge
      One Month Later
    • One Year In
      Orpheus13 earned a badge
      One Year In
    • One Month Later
      Orpheus13 earned a badge
      One Month Later
    • Week One Done
      Orpheus13 earned a badge
      Week One Done
    • Week One Done
      serfegyed earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      535
    2. 2
      ATLien_0
      260
    3. 3
      +FloatingFatMan
      203
    4. 4
      +Edouard
      167
    5. 5
      Xenon
      124
  • Tell a friend

    Love Neowin? Tell a friend!