350gb HD cloning is taking 24hrs+?


Recommended Posts

I'm trying to clone my drive to a 1TB backup drive.  My drive has two partitions, a 350gb and a 70gb.  Using DriveImage XML, the 70gb partition was copied in 40mins.  

Using the same software, copying from the same drive, to the same backup drive, the only difference is the source partition is now the 350gb one, and it's been running all night for 12hrs and it's only 2% done?!  

 

Is this normal?  

Link to comment
https://www.neowin.net/forum/topic/1162858-350gb-hd-cloning-is-taking-24hrs/
Share on other sites

its copying at 160KB/S, which is way too slow. 12 hrs for only 7 gigs? you just did 70gigs in 40 mins. maybe its doing something else, not really sure.ill look into this software.

 

The drive it is copying from DOES have a few (7, in total) bad sectors, could that be somehow slowing it down to nothing?

 

Lol 160kB/s, I'd be better off uploading my drive to a cloud.

 

Also, I should add, this is the 3rd try.  Same problem with the first 2 tries.  Also, before I tried doing a drive image, I did a standard file copy to a different backup drive, copied the same 350GB in 4hrs.

 

I'd use different software, but this is the only one I've found that will let me copy a single partition at a time.  All the other ones (Acronis, Easeus) are too packed with that "user friendly" bull****, that just makes them more confusing to use with fewer options.

Try this software http://www.macrium.com/reflectfree.aspx

Make a PE v4 boot media (CD or USB stick). Boot into it and do a clone, you can edit the partition sizes when you do the clone.

I use the Pro version, it's works very well.

P.S I can help u go thru the procedure if you want (on IRC or voice chat if you want).

by the way,the 350gb drive, is this where windows is installed? and is the application running within windows itself? or did it reboot into a special environment?

To be clear, the 350GB is a PARTITION of a 500GB drive.  It has a copy of windows 7 installed, but it is not the windows I was booted from.  The 2nd partition, the 70GB one with Windows 8 installed, is the one I actually booted to, and IT copied faster than the one that was not in use!

 

Try this software http://www.macrium.com/reflectfree.aspx

Make a PE v4 boot media (CD or USB stick). Boot into it and do a clone, you can edit the partition sizes when you do the clone.

I use the Pro version, it's works very well.

P.S I can help u go thru the procedure if you want (on IRC or voice chat if you want).

I'd rather not have to use a boot disk.  I'd like to be able to use my system while I copy.  And DriveImage XML tries to do a volume lock first, and then if that fails because the drive is in use, it does volume shadow copy.    But if DKAngel says it can also do it from Windows, I'll give it a shot!

 

EDIT: Do you know of any mirrors for the free version?  Macrium's site makes you download from CNET, which now forces you to use their "downloader" instead of directly linking to the file.  I'd rather not have to install a "downloader" if possible.

Yes it is true you can clone from within Windows (using VSS).

Personally I prefer to use the boot media because this means the whole system is dedicated to the clone, so you get best possible copy speed.

There will be nothing else running to interfere with, or slow down, the copy process.

The dowloader is fine, it just allows you to get the most relevent version.

Yes it is true you can clone from within Windows (using VSS).

Personally I prefer to use the boot media because this means the whole system is dedicated to the clone, so you get best possible copy speed.

There will be nothing else running to interfere with, or slow down, the copy process.

The dowloader is fine, it just allows you to get the most relevent version.

 

So it should be just as fast to clone within Windows, because it isn't my system partition, so it doesn't use VSS, it locks/dismounts the partition entirely.  And since reading/writing to HDs only uses 5-10% of my CPU, it shouldn't be any slower unless I start playing games or something.

;

So it should be just as fast to clone within Windows, because it isn't my system partition, so it doesn't use VSS, it locks/dismounts the partition entirely.  And since reading/writing to HDs only uses 5-10% of my CPU, it shouldn't be any slower unless I start playing games or something.

It never is a CPU bound process. It is other things using the HDD that is gonna slow things down.

The downloader doesn't actually install itself, it just enables you to get the correct version of the Macrium Reflect installer.

;

It never is a CPU bound process. It is other things using the HDD that is gonna slow things down.

 

Oh right cause it is the same drive as my system pt, just different pts.  Well then why did my system partition copy so damn fast?!

 

Okay, I can see how to make an image file of a partition in Macrium, but I don't want an image file, I want a copy of the partition.  So that I can boot from it.  The help file for Macrium says that it has a "cloning" feature, but I don't see a clone button anywhere.  Is that a pro-only feature?

Ok I will amend my text:

It never is a CPU bound process. It is other things using the HDD that COULD slow things down.

If your copy is going well then that's great.

Oh right cause it is the same drive as my system pt, just different pts.  Well then why did my system partition copy so damn fast?!

Okay, I can see how to make an image file of a partition in Macrium, but I don't want an image file, I want a copy of the partition.  So that I can boot from it.  The help file for Macrium says that it has a "cloning" feature, but I don't see a clone button anywhere.  Is that a pro-only feature?

Cloning option is only avaliable from the WinPE boot disc.

Ok I will amend my text:

It never is a CPU bound process. It is other things using the HDD that COULD slow things down.

If your copy is going well then that's great.

Cloning option is only avaliable from the WinPE boot disc.

 

Nevermind, I found the cloning option.  It IS available from Windows, just not on the left pane where all the tasks are listed, its only shown when you click on a partition in the main pane.  Kinda stupid layout, but okay, it is now currently cloning.

A whole bunch of options I didn't understand though.  Like why was the partition alignment set to "Windows XP CHS" if it was a Windows 7 drive?  And I'm assuming I set it to an Active partition if I want it to be bootable, but then how am I booting off my Windows 8 partition if it is only a Primary (not Active) partition?

Nevermind, I found the cloning option. It IS available from Windows,

Oops sorry don't often use the free version, I forgot that was available.

Set the alignment to Win7/8/ssd (1MB) on all partitiions.

If you installed Win8 after Win7 (looks like you did) then the active partition will still be Win7 because that's where the boot loader has been placed.

I'm guessing that the HDD has some hardware issue(s) because you mentioned it has 7 bad sectors.

This has the potential to make access slow if the hardware is failing.

What make/model HDD do you have? You could try running a HDD diagnostic tool like http://www.seagate.com/gb/en/support/downloads/seatools/

You may have missed my post above yours as we posted at the same time, please read. Thanks.

 I did read.  Clearly this has nothing to do with bad sectors, or it would have interrupted DriveImage XML too.  As well as probably interrupting the image of the 2nd partition.  And the make/model of my drive is listed in the screenshot.

I have done a chkdsk /r, and all bad sectors are marked as such, and there haven't been any new ones created in a long time.  This shouldn't interfere with a drive clone.

Again, folks, bad sectors should not interfere with a drive cloning.  A bad/unreadable sector is still technically readable, it just doesn't return the bit that the system expects when it reads the bit.  Drive cloning shouldn't care what the bit is expected to be, and just copy it anyway, errors and all.

 

And I'm right.  Because I did a partition image instead of a partition clone, and it finished in 2 hours without any errors.  Then I restored the image to the drive, again without any errors.  Same end result as a drive clone, but with an extra step added in between.  I have no idea why Macrium is having such a hard time doing a drive clone, but it's not my drive's fault.  Even in the WinPE environment, Macrium got to 4% of cloning the partition and then said "Broken pipe" error.  

 

Oh well, I guess it just means any time I want to clone a drive, I have to image and restore it instead.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Look up 'inflation' kid. Ask an AI for the numbers between both games.
    • Google reportedly set to lose two key Gemini and DeepMind researchers to Anthropic by Karthik Mudaliar Google is reportedly preparing to lose two more prominent artificial intelligence researchers, with Gemini contributors Jonas Adler and Alexander Pritzel planning to join rival AI developer Anthropic. According to a report from Bloomberg, both researchers are viewed internally as important contributors to Google’s flagship Gemini model family. Adler worked on Google’s AI coding efforts, while Pritzel was involved in the process used to train AI systems. Neither company has publicly confirmed the moves. The report also does not say when the researchers will formally leave Google or what positions they will hold at Anthropic. Training a large AI model requires decisions covering its architecture, data preparation, distributed computing infrastructure, and post-training methods that shape how the finished system behaves. Researchers with experience operating at the scale of Gemini are consequently difficult to replace quickly. Both Adler and Pritzel have previously contributed to Google DeepMind’s scientific research as well. They are listed among the authors of the company’s work on expanding AlphaFold protein-structure predictions across entire proteomes, alongside AlphaFold researchers including John Jumper. The reported departures arrive shortly after another important change within Google’s Gemini organization. Gemini co-lead Noam Shazeer is leaving Google for OpenAI, after returning to the search company in 2024 through its deal with Character.AI. Shazeer is particularly well known as one of the authors of the Transformer paper, whose architecture became the foundation for most modern large language models. Anthropic, meanwhile, has been recruiting recognizable figures from other leading laboratories. OpenAI co-founder and former Tesla AI director Andrej Karpathy joined Anthropic’s pre-training team in May. His move, followed by the reported recruitment of several Google researchers, suggests Anthropic is strengthening the research teams responsible for the core capabilities of future Claude models rather than concentrating solely on product and enterprise sales. The competition is complicated by the companies’ extensive commercial relationships. Anthropic competes directly with Google’s Gemini models, but it also relies on Google as an infrastructure partner. In April, Anthropic announced an expanded agreement with Google and Broadcom covering multiple gigawatts of next-generation Tensor Processing Unit capacity. TPUs are Google-designed accelerators used to train and run large AI models. via Bloomberg
    • This article makes my head hurt. Lots of confusing words
    • Google adds built-in computer control to Gemini 3.5 flash by Karthik Mudaliar Google has added Computer Use as a built-in tool in Gemini 3.5 Flash, giving developers a single model that can reason about a task and operate graphical interfaces across browsers, mobile devices, and desktop environments. The feature is available through the Gemini API and Google’s Gemini Enterprise Agent Platform, although it remains a preview feature for now. Computer Use enables an AI agent to examine screenshots and return actions such as mouse clicks, scrolling, and keyboard input. A developer’s application must execute those actions, capture the resulting screen, and send it back to Gemini, creating a continuous loop until the task is completed. Google says the integration can be used for activities including repetitive form filling, application testing, research across multiple websites, and longer enterprise workflows. Gemini 3.5 Flash can work with browser, mobile, and desktop environments, whereas Google’s earlier standalone Computer Use model was primarily positioned around browser interaction. The main change is consolidation. Computer control was previously offered through the separate Gemini 2.5 Computer Use preview model. As Neowin reported when that model was introduced, it was designed to interpret a visual interface and generate actions without requiring a website-specific API. Google later brought Computer Use to preview versions of Gemini 3 Pro and Gemini 3 Flash in January 2026. The latest release now incorporates the tool into the stable Gemini 3.5 Flash model rather than requiring developers to select a specialized model solely for interface automation. Gemini 3.5 Flash itself was announced in May as Google’s latest fast model for coding and multi-step agent workflows. It supports a one-million-token input context window and up to 65,000 output tokens, along with adjustable thinking levels that let developers trade additional reasoning for lower latency and cost. Google also added that Gemini 3.5 Flash received targeted adversarial training for computer-use scenarios. The company is also offering safeguards that can require user confirmation before sensitive or irreversible actions and automatically stop a workflow when suspected prompt injection is detected. Its developer documentation describes configurable protections for areas such as financial transactions and changes to sensitive records. Google isn't the first to bring Computer Use to its platform. Anthropic has made computer control available through Claude, while OpenAI has continued improving computer-use performance in its recent models. Microsoft has also applied the concept to business workflows, including a Computer Use capability for the Researcher agent in Microsoft 365 Copilot.
    • After I installed KB5095093, the volume on my ARM laptop won't go above 20%. It's stuck on the hearing protection level, which is pretty much useless if you want to listen to anything. I rolled back.
  • Recent Achievements

    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
    • One Year In
      Tom Schmidt earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!