Removing RAID 1 array without losing data?


Recommended Posts

Basically, I have a 2TB drive setup in a RAID 1 with another 2TB drive. It has the OS and all my data on it. I'm trying to disable the RAID 1 configuration, but leave the two drives as they were, so I can boot to one of them (guess it doesn't matter which) as if nothing had changed (other than the data no longer being mirrored).

 

Is this possible? I've been using the RAID that came with my motherboard, Gigabyte GA-970A-UD3. I believe it's an Advanced Micro Devices controller.

 

[EDIT]

I should mention that when I press Ctrl-F at boot time and go to Delete LD Menu, it says "Press Ctrl-Y to delete the data in the disk!"...

[/EDIT]

As far as I know, there is no way to break an array and retain your data. You'd have to back up everything, then configure your BIOS for separate drives instead of RAID, and install your OS and restore data accordingly. Others can feel free to correct me if I'm wrong, but I've done this before by accident actually and lost my data. That was on a RAID 0 setup though so since maybe you are on RAID 1, you can keep your data on one of the drives when breaking up the array.

All the RAID-1 configurations I have encountered would not have the data persist if you delete the RAID. You have to pull the data off the RAID, delete the RAID, then put the data back.

 

This is the MAJOR reason I don't like realtime RAIDS, and prefer snapshot raids for archiving data (note, OS' don't work well with snapshot raids...)

 

I would get confirmation of this...but my advice is to backup before deleting the RAID.

I don't know what "realtime" and "snapshot" raids are. Can you clarify? I use Windows' software RAID with my 2 2TB drives for a 4TB volume. I stay away from hardware RAIDS because if the hardware fails, I am kind of screwed. With a software RAID, I can just reinstall WIndows and it's back.

No way of breaking the raid without loosing data - Quick idea though.

 

Boot with 1 disk into Windows, plug in the second drive and format (NTFS), then perform a bare metal backup using Windows Backup and Restore to the second drive. Change boot from RAID to AHCI in BIOS and boot into the Windows disk (DVD), select restore and recovery, wipe the drive (DISK1), plug in the second drive with BMR files, restore using BMR to the formatted drive. When booted back into Windows you will have all your data and applications on a single disk, then plug in the other drive and format.

I have Intel Rapid Storage Technology installed which monitors the RAID in Windows and well as having it setup in BIOS. If I was going to split my RAID1, I would firstly uninstall the Intel application monitoring the raid then physically disconnect 1 of the drives in the raid. Next turn on the system and change SATA configuration from raid to ACHI. Then go into Windows and check if the drive is detected on its own with all data present, if so, I would go ahead and get the second drive connected back up again.

I have one of those Intel RST cards too, in a parts drawer lol. I used it for a long time and was annoyed by how much longer Windows seemed to boot with it because of posting. I've found the Windows software RAID to be just as fast and safer because there's no hardware to break.

  • 4 years later...

So I’m trying to repair my raid basically the same as you I want to delete it, so I’m using an extrenal had mirror my current raid then going to break/ delete raid then reboot off the extrenal had then re mirror off that with just the one drive, Anya thoughts ?

 

  • Nick H. locked this topic
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • NTLite 2025.06.10459 is out.
    • Wireshark 4.4.7 by Razvan Serea  Wireshark is a network packet analyzer. A network packet analyzer will try to capture network packets and tries to display that packet data as detailed as possible. You could think of a network packet analyzer as a measuring device used to examine what's going on inside a network cable, just like a voltmeter is used by an electrician to examine what's going on inside an electric cable (but at a higher level, of course). In the past, such tools were either very expensive, proprietary, or both. However, with the advent of Wireshark, all that has changed. Wireshark is perhaps one of the best open source packet analyzers available today. Deep inspection of hundreds of protocols, with more being added all the time Live capture and offline analysis Standard three-pane packet browser Multi-platform: Runs on Windows, Linux, OS X, Solaris, FreeBSD, NetBSD, and many others Captured network data can be browsed via a GUI, or via the TTY-mode TShark utility The most powerful display filters in the industry Rich VoIP analysis Read/write many different capture file formats Capture files compressed with gzip can be decompressed on the fly Live data can be read from Ethernet, IEEE 802.11, PPP/HDLC, ATM, Bluetooth, USB, Token Ring, Frame Relay, FDDI, and others (depending on your platfrom) Decryption support for many protocols, including IPsec, ISAKMP, Kerberos, SNMPv3, SSL/TLS, WEP, and WPA/WPA2 Coloring rules can be applied to the packet list for quick, intuitive analysis Output can be exported to XML, PostScript®, CSV, or plain text Wireshark 4.4.7 changelog: The following vulnerabilities have been fixed wnpa-sec-2025-02 Dissection engine crash. Issue 20509. CVE-2025-5601. The following bugs have been fixed Wireshark does not correctly decode LIN "go to sleep" in TECMP and CMP. Issue 20463. Dissector bug, Protocol CIGI. Issue 20496. Green power packets are not dissected when proto_version == ZBEE_VERSION_GREEN_POWER. Issue 20497. Packet diagrams misalign or drop bitfields. Issue 20507. Corruption when setting heuristic dissector table UI name from Lua. Issue 20523. LDAP dissector incorrectly displays filters with singleton "&" Issue 20527. WebSocket per-message compression extentions: fail to decompress server messages (from the 2nd) due to parameter handling. Issue 20531. The LL_PERIODIC_SYNC_WR_IND packet is not properly dissected (packet-btle.c) Issue 20554. Updated Protocol Support AT, BT LE LL, CIGI, genl, LDAP, LIN, Logcat Text, net_dm, netfilter, nvme, SSH, TCPCL, TLS, WebSocket, ZigBee, and ZigBee ZCL Download: Wireshark 4.4.7 | 83.2 MB (Open Source) Download: Portable Wireshark 4.4.7 | ARM64 Installer View: Wireshark Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Snapchat finally has a watchOS app, a decade after the Apple Watch launched by David Uzondu Snap has announced that Snapchat is finally hopping onto Apple Watch, something many users have probably been waiting for. This new app lets you easily preview an incoming message right on your wrist and then fire back a reply without ever needing to grab your iPhone. For those quick responses, you have options: you can tap out a message on the keyboard, use Scribble to draw letters, dictate your reply, or just send a fitting emoji. Snap says it's trying to make Snapchat easier to use on all the different devices people have in their lives. It's already seen people using Snapchat on tablets and the web, so bringing it to wearables like the Apple Watch feels like the next natural move. That marks a big change from back in 2015 when the Apple Watch first launched. At the time, Snap took a more cautious "wait and see" approach, wanting to see if people actually used smartwatches before building an app. New app launches are not always perfect. It is still early days for the watchOS app, as some users on Reddit have reported the app being stuck on the loading screen. Hopefully, Snap will address these initial teething problems quickly. This expansion to Apple Watch comes after the company abandoned its widely criticized three-tab app redesign following a notable drop in its North American daily active users and significant negative feedback. That redesign, introduced back in September 2024, was meant to simplify things but ended up frustrating many, leading Snap to reverse course after about seven months and work on a refined five-tab layout. Meanwhile, Android smartwatch users with Wear OS are still in a different boat, as there is no official, dedicated Snapchat app for that platform yet. They can typically only receive notifications, and attempts to sideload the full Android app often result in a clunky experience.
    • I've asked Sayan to limit these articles to science tech news.
    • LeafView 3.6.4 by Razvan Serea LeafView is a fast, open-source image viewer built with Electron. It offers a sleek, minimal UI for fast and efficient image browsing. Supporting various formats, LeafView ensures a smooth viewing experience with essential features like zoom, rotation, and slideshow mode. Designed for simplicity and performance, it utilizes hardware acceleration for smooth rendering and supports touch gestures for seamless navigation. LeafView key features: Lightweight & Open-Source – Minimal resource usage with a clean, efficient design Electron-Based – Cross-platform compatibility with modern UI Multiple Image Format Support – Opens JPG, PNG, GIF, BMP, and more Smooth Rendering – Hardware acceleration for fast performance Essential Image Controls – Zoom, rotate, and slideshow mode Touch Gesture Support – Seamless navigation on compatible devices Minimal UI – Focused on simplicity and ease of use LeafView 3.6.4 changelog: Update electron to v36.4.0 Download: LeafView 3.6.4 | Portable | ~100.0 MB (Open Source) View: LeafView Website | Other operating systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      survivor303 earned a badge
      One Year In
    • Week One Done
      jbatch earned a badge
      Week One Done
    • First Post
      Yianis earned a badge
      First Post
    • Rookie
      GTRoberts went up a rank
      Rookie
    • First Post
      James courage Tabla earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      419
    2. 2
      +FloatingFatMan
      182
    3. 3
      snowy owl
      181
    4. 4
      ATLien_0
      174
    5. 5
      Xenon
      137
  • Tell a friend

    Love Neowin? Tell a friend!