Removing RAID 1 array without losing data?


Recommended Posts

Basically, I have a 2TB drive setup in a RAID 1 with another 2TB drive. It has the OS and all my data on it. I'm trying to disable the RAID 1 configuration, but leave the two drives as they were, so I can boot to one of them (guess it doesn't matter which) as if nothing had changed (other than the data no longer being mirrored).

 

Is this possible? I've been using the RAID that came with my motherboard, Gigabyte GA-970A-UD3. I believe it's an Advanced Micro Devices controller.

 

[EDIT]

I should mention that when I press Ctrl-F at boot time and go to Delete LD Menu, it says "Press Ctrl-Y to delete the data in the disk!"...

[/EDIT]

As far as I know, there is no way to break an array and retain your data. You'd have to back up everything, then configure your BIOS for separate drives instead of RAID, and install your OS and restore data accordingly. Others can feel free to correct me if I'm wrong, but I've done this before by accident actually and lost my data. That was on a RAID 0 setup though so since maybe you are on RAID 1, you can keep your data on one of the drives when breaking up the array.

All the RAID-1 configurations I have encountered would not have the data persist if you delete the RAID. You have to pull the data off the RAID, delete the RAID, then put the data back.

 

This is the MAJOR reason I don't like realtime RAIDS, and prefer snapshot raids for archiving data (note, OS' don't work well with snapshot raids...)

 

I would get confirmation of this...but my advice is to backup before deleting the RAID.

I don't know what "realtime" and "snapshot" raids are. Can you clarify? I use Windows' software RAID with my 2 2TB drives for a 4TB volume. I stay away from hardware RAIDS because if the hardware fails, I am kind of screwed. With a software RAID, I can just reinstall WIndows and it's back.

No way of breaking the raid without loosing data - Quick idea though.

 

Boot with 1 disk into Windows, plug in the second drive and format (NTFS), then perform a bare metal backup using Windows Backup and Restore to the second drive. Change boot from RAID to AHCI in BIOS and boot into the Windows disk (DVD), select restore and recovery, wipe the drive (DISK1), plug in the second drive with BMR files, restore using BMR to the formatted drive. When booted back into Windows you will have all your data and applications on a single disk, then plug in the other drive and format.

I have Intel Rapid Storage Technology installed which monitors the RAID in Windows and well as having it setup in BIOS. If I was going to split my RAID1, I would firstly uninstall the Intel application monitoring the raid then physically disconnect 1 of the drives in the raid. Next turn on the system and change SATA configuration from raid to ACHI. Then go into Windows and check if the drive is detected on its own with all data present, if so, I would go ahead and get the second drive connected back up again.

I have one of those Intel RST cards too, in a parts drawer lol. I used it for a long time and was annoyed by how much longer Windows seemed to boot with it because of posting. I've found the Windows software RAID to be just as fast and safer because there's no hardware to break.

  • 4 years later...

So I’m trying to repair my raid basically the same as you I want to delete it, so I’m using an extrenal had mirror my current raid then going to break/ delete raid then reboot off the extrenal had then re mirror off that with just the one drive, Anya thoughts ?

 

  • Nick H. locked this topic
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Only if it's the fastest to open ads and blow up my vision with advertising that I don't want to see. Damn Google
    • Chrome is now faster than ever and Google explains how it did it by Sayan Sen Back in June last year, Google touted some great performance improvements for Chrome and shared a blog post explaining in detail how it managed to achieve them. Today, almost exactly a year later, the search giant is back again with another such post as it continues to make performance gains in its Chromium browser. Interestingly, Google is not the only one to make such claims in recent times. Microsoft also highlighted recently how Edge was getting significantly faster. Both Microsoft and Google have cited the Speedometer 3.0 benchmark to test. We recently measured browsing performance during our T-Force DDR5-7200 RAM review, also using Speedometer 3.0. In its blog post, Google says that the development team made significant improvements to memory management and caching. This includes some redesigning effort of the memory layouts for many internal data structures used in components such as DOM, CSS, layout, and painting. Google says that Blink, the rendering engine in Chromium, now "avoids a lot of useless churn" so as to make better use of the CPU caches. In the areas where memory handling previously relied on garbage collection in Oilpan, like the DOM (document object model), the team has expanded that by shifting from using malloc (memory allocation function) to Oilpan entirely. For those wondering, Olipan is the garbage collector in Blink. Some of the memory management and caching improvements Google made are fundamental to good code optimization. If you recall, recently, a senior Microsoft engineer also pointed out many of these issues in apps that slow Windows down. There are also improvements in handling strings within the renderer; the hashing method was updated to rapidhash, which is said to improve performance. For when rendering tasks become inherently expensive, such as computing CSS styles for various elements, Google adds that caching techniques have been enhanced to achieve higher cache hits and fewer misses.
    • Laptop users, this appears to be single-sided so it should fit even in cases with thin slots.
    • Apple wouldn't be what it is today without China either...
  • Recent Achievements

    • First Post
      Uranus_enjoyer earned a badge
      First Post
    • Week One Done
      Uranus_enjoyer earned a badge
      Week One Done
    • Week One Done
      jfam earned a badge
      Week One Done
    • First Post
      survivor303 earned a badge
      First Post
    • Week One Done
      CHUNWEI earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      428
    2. 2
      +FloatingFatMan
      196
    3. 3
      snowy owl
      191
    4. 4
      ATLien_0
      186
    5. 5
      Xenon
      141
  • Tell a friend

    Love Neowin? Tell a friend!