Removing RAID 1 array without losing data?

By kevinmd88
in Hardware Hangout

 Share

Recommended Posts

Explorer

kevinmd88

Posted
Posted

Basically, I have a 2TB drive setup in a RAID 1 with another 2TB drive. It has the OS and all my data on it. I'm trying to disable the RAID 1 configuration, but leave the two drives as they were, so I can boot to one of them (guess it doesn't matter which) as if nothing had changed (other than the data no longer being mirrored).

 

Is this possible? I've been using the RAID that came with my motherboard, Gigabyte GA-970A-UD3. I believe it's an Advanced Micro Devices controller.

 

[EDIT]

I should mention that when I press Ctrl-F at boot time and go to Delete LD Menu, it says "Press Ctrl-Y to delete the data in the disk!"...

[/EDIT]

Grand Master

patseguin Global Moderator

Posted
  • Global Moderator
Posted

As far as I know, there is no way to break an array and retain your data. You'd have to back up everything, then configure your BIOS for separate drives instead of RAID, and install your OS and restore data accordingly. Others can feel free to correct me if I'm wrong, but I've done this before by accident actually and lost my data. That was on a RAID 0 setup though so since maybe you are on RAID 1, you can keep your data on one of the drives when breaking up the array.

Proficient

UseLess

Posted
Posted

All the RAID-1 configurations I have encountered would not have the data persist if you delete the RAID. You have to pull the data off the RAID, delete the RAID, then put the data back.

 

This is the MAJOR reason I don't like realtime RAIDS, and prefer snapshot raids for archiving data (note, OS' don't work well with snapshot raids...)

 

I would get confirmation of this...but my advice is to backup before deleting the RAID.

Grand Master

patseguin Global Moderator

Posted
  • Global Moderator
Posted

I don't know what "realtime" and "snapshot" raids are. Can you clarify? I use Windows' software RAID with my 2 2TB drives for a 4TB volume. I stay away from hardware RAIDS because if the hardware fails, I am kind of screwed. With a software RAID, I can just reinstall WIndows and it's back.

Contributor

1ON

Posted
Posted

No way of breaking the raid without loosing data - Quick idea though.

 

Boot with 1 disk into Windows, plug in the second drive and format (NTFS), then perform a bare metal backup using Windows Backup and Restore to the second drive. Change boot from RAID to AHCI in BIOS and boot into the Windows disk (DVD), select restore and recovery, wipe the drive (DISK1), plug in the second drive with BMR files, restore using BMR to the formatted drive. When booted back into Windows you will have all your data and applications on a single disk, then plug in the other drive and format.

Proficient

JJ_

Posted
Posted

I have Intel Rapid Storage Technology installed which monitors the RAID in Windows and well as having it setup in BIOS. If I was going to split my RAID1, I would firstly uninstall the Intel application monitoring the raid then physically disconnect 1 of the drives in the raid. Next turn on the system and change SATA configuration from raid to ACHI. Then go into Windows and check if the drive is detected on its own with all data present, if so, I would go ahead and get the second drive connected back up again.

Grand Master

patseguin Global Moderator

Posted
  • Global Moderator
Posted

I have one of those Intel RST cards too, in a parts drawer lol. I used it for a long time and was annoyed by how much longer Windows seemed to boot with it because of posting. I've found the Windows software RAID to be just as fast and safer because there's no hardware to break.

  • 4 years later...
Neowinian

Todlay

Posted
Posted

So I’m trying to repair my raid basically the same as you I want to delete it, so I’m using an extrenal had mirror my current raid then going to break/ delete raid then reboot off the extrenal had then re mirror off that with just the one drive, Anya thoughts ?

 

  • Nick H. locked this topic
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Microsoft can't help break Windows Outlook as even opening an email now sends it crashing

      By TheHedgehogSong · Posted

      I'd switch to the new outlook readily ... if it was not such utter dogshit! Trying to replace the original Outlook with all it's functionality with that knock-off mobile app is downright insulting.
    • Sony and Bungie delay Marathon indefinitely after 'passionate feedback' from community

      By excalpius · Posted

      Yeah, it seemed like a bunch of 2D decal assets to me, so I didn't think it would be a huge issue to replace them. Assuming, of course, that Sony didn't just decide to settle and pay the artist instead. Do we know if that happened?
    • Trump's team takes down Trump Mobile coverage map that includes "Gulf of Mexico"

      By excalpius · Posted

      No worries, I wasn't pointing to your post specifically at all. I was talking in general and building upon your idea.
    • Crazy Taxi, Sonic CD, and other classic Sega games are now free on mobile devices

      By Whathell · Posted

      This item is not available in your country
    • This 2TB NVMe Gen4 SSD is priced just $94 and you also get a free 64GB UHS-I memory card

      By hellowalkman · Posted

      This 2TB NVMe Gen4 SSD is priced just $94 and you also get a free 64GB UHS-I memory card by Sayan Sen A few days ago, we reported on Team Group's T-FORCE G50 4TB NVMe SSD that was up for grabs at just $200 thanks to a promo coupon. Sadly, that deal has expired although you can still WD's SN8100 (Gen5) and SN7100 (Gen4) offerings as they are still running the discount. If you don't have the budget for those or are shopping for lower capacity drives then Crucial's T500 Gen4 drive discount is still live, and you can get them for just $125. And while the G50 4TB deal has expired, Team Group is now offering its 2TB model at its lowest ever price and you also get a free Micro SD card with it. The Team Group G50 is also a TLC (triple level cell) NAND flash SSD, and thus the endurance on the T-FORCE SSD is quite good, as it is rated for 1300 TBW (terabytes written) for the 2TB variant. Its MTBF, or Mean Time Between Failure, is claimed at 3,000,000 hours. The operating temperature is 0~70 C. The G50 does not have a dedicated DRAM cache (only the G50 Pro SKUs have it), but since it is based on NVMe version 1.4 which supports HMB (host memory buffer) technology; thus, the drive can use system memory for caching. In terms of performance, Team Group promises sequential read and write speeds of up to 5000 MB/s and 4500 MB/s, respectively. However, the firm does not disclose random throughput metrics. Get the Team Group G50 at the link below (deal is said to be ending in less than 10 hours): Team Group T-FORCE G50 SSD (TM8FFE002T0C129) + Team Group 64GB Elite microSDXC UHS-I U3, V30, A1, Micro SD with SD Adapter, to 100MB/s (TEAUSDX64GIV30A103): $105.99 + $12 off with promo code SSETA665 (Shipped and Sold by Newegg US) This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.

  • Recent Achievements

    • First Post
      Ian_ earned a badge
      First Post
    • Explorer
      JaviAl went up a rank
      Explorer
    • Reacting Well
      Cole Multipass earned a badge
      Reacting Well
    • Reacting Well
      JLP earned a badge
      Reacting Well
    • Week One Done
      Rhydderch earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      646
    2. 2
      ATLien_0
      269
    3. 3
      Michael Scrip
      218
    4. 4
      +FloatingFatMan
      184
    5. 5
      Steven P.
      146
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!